71507-T5R-A00 Bumper Garnish Panel for HONDA Fit 2015 Left
Primary OE reference: 71507-T5R-A00
Cross-reference number 1: 71507-T5R-A00
Cross-reference number 2: 71507T5RA00
Product: Bumper Garnish Panel
Vehicle: HONDA Fit 2015
Installation area: Rear
Side / orientation: Left
Surface detail: verify against the original part
Internal item code: HD02005-040
Fitment note: verify the mounting side; verify the mounting side; compare the mounting direction before ordering 71507-T5R-A00
Product comparison: check the adjoining gap; review the surface texture; compare the end termination against the removed bumper garnish panel
Installation note: check lamp-cover clearance; trial-fit without force; check the final perimeter on the Fit
Wholesale enquiry: state the target application; confirm the delivery schedule; retain the product label for HD02005-040
Application guidance: For an export quotation, identify 71507-T5R-A00, HONDA Fit 2015 and the required mounting side. Also review the end profiles, review the outer-edge shape, clean the mounting channel, and request protective inner packing.
71507-T5R-A00 Bumper Garnish Panel Product Overview
Prepared for wholesale and replacement-part enquiries, 71507-T5R-A00 covers a bumper garnish panel for HONDA Fit 2015. Item HD02005-040 belongs in the rear installation zone and should be matched by OE number, shape and mounting points.
For an export quotation, identify 71507-T5R-A00, HONDA Fit 2015 and the required mounting side. Also review the end profiles, review the outer-edge shape, clean the mounting channel, and request protective inner packing.
Fitment and Application for Fit
Before sourcing this bumper garnish panel for Fit, confirm the surface specification, check adjacent garnish pieces, and match the original clip spacing. At the workshop preparation stage, compare the mounting direction, confirm the vehicle market, and compare the complete OE number.
Before confirming this verify against the original part bumper garnish panel, confirm the production year, inspect the original contour, and review market-specific styling. For a repeat wholesale order, review the end profiles, compare the mounting direction, and match the stated body style.
For HONDA Fit 2015, check nearby lamp openings, confirm the surface specification, and match the stated body style. While reviewing the supplied photographs, review market-specific styling, match the original clip spacing, and verify the mounting side.
Bumper Garnish Panel Design and Replacement Notes
When separating nearby Fit trim variants, review nearby cover openings, review the outer-edge shape, and inspect the locator direction. During the physical comparison, compare the end termination, review the surface texture, and check the adjoining gap.
When comparing 71507-T5R-A00 with the removed part, inspect the locator direction, review the surface texture, and inspect the back-side structure. When checking the visible exterior face, examine the visible finish, inspect the fastening slots, and review transferred hardware.
For the listed 2015 application, review the surface texture, compare gloss or plating, and inspect narrow moulding ends. At the workshop preparation stage, check the adjoining gap, review transferred hardware, and compare the original length.
For a direct comparison of 71507-T5R-A00, review facelift differences, inspect the fastening slots, avoid bending long sections, and send original-part photographs. The bumper garnish panel should match the original left rear profile before it is installed or released for shipment.
Installation Guidance
Before sourcing this bumper garnish panel for Fit, review the completed alignment, protect the visible surface, and check adjacent panel gaps. While checking adjacent body parts, inspect every screw point, confirm an even seated fit, and support the trim evenly.
Before confirming this verify against the original part bumper garnish panel, trial-fit without force, check lamp-cover clearance, and inspect the surrounding guides. Before clips or hardware are transferred, transfer reusable clips carefully, protect painted panel edges, and support the trim evenly.
For HONDA Fit 2015, avoid bending long sections, inspect every screw point, and review separate hardware needs. During the physical comparison, review the completed alignment, clean the mounting channel, and trial-fit without force.
Product Technical Specifications
| Product type | Bumper Garnish Panel |
|---|---|
| Primary OE reference | 71507-T5R-A00 |
| Cross-reference numbers | 71507-T5R-A00 71507T5RA00 |
| Internal item code | HD02005-040 |
| Vehicle brand | HONDA |
| Vehicle model | Fit |
| Model year | 2015 |
| Installation area | Rear |
| Side / orientation | Left |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Fit 2015 |
Wholesale Supply and Packing
When separating nearby Fit trim variants, confirm the delivery schedule, request supported carton packing, and review carton edge protection. Before packing the confirmed item, state the destination port, confirm the surface requirement, and state the target application.
When comparing 71507-T5R-A00 with the removed part, confirm the surface requirement, protect projecting locators, and inspect the receiving condition. For a no-force trial fit, confirm sample requirements, review carton edge protection, and compare the supplied photographs.
For the listed 2015 application, confirm sample requirements, check the ordered mounting side, and confirm the delivery schedule. While checking adjacent body parts, include the complete OE number, inspect the receiving condition, and confirm separate accessory needs.
A quotation request should state 71507-T5R-A00, HD02005-040, HONDA Fit 2015, required quantity and destination. VIN data and original-part photographs allow the supplier to review the line before confirming commercial terms.
Frequently Asked Questions
What information is needed for a 71507-T5R-A00 quotation?
Send HONDA Fit 2015 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Fit, match the stated body style, review the centre alignment, transfer reusable clips carefully, and confirm the delivery schedule before installation or quotation.
How should 71507-T5R-A00 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Fit, review market-specific styling, check the bumper interface, inspect the surrounding guides, and check the ordered mounting side before installation or quotation.
Which vehicle is 71507-T5R-A00 listed for?
The source application is HONDA Fit 2015. VIN, production date, body style and market version should still be checked because exterior trim can change within one model line. For Fit, match the original clip spacing, inspect the fastening slots, check lamp-cover clearance, and confirm sample requirements before installation or quotation.
Does 71507-T5R-A00 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Fit, verify the mounting side, compare visible edge height, trial-fit without force, and request supported carton packing before installation or quotation.
Is a model name alone enough to order 71507-T5R-A00?
No. The Fit name is useful for discovery, but OE number 71507-T5R-A00, VIN or build data, side, finish and physical attachment points should agree. For Fit, check the vehicle build date, review the surface texture, check the final perimeter, and state the required quantity before installation or quotation.
Request a Quote
Send the complete OE reference 71507-T5R-A00, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
