71502-TET-H60 Rear Bumper Lower Garnish for HONDA Civic 2019
Product: Rear Bumper Lower Garnish
Primary OE: 71502-TET-H60
Item code: HD02002-021
Cross-reference numbers:
71502-TET-H60
Brand: HONDA
Model: Civic
Application reference: 2019 HONDA Civic
Position: Rear
Verification: Do not select from appearance alone; compare the OE code, removed panel and actual bumper assembly.
Supply note: Provide a line-item quantity for HD02002-021 together with delivery, labelling and palletisation details.
71502-TET-H60 provides a dedicated reference page for a bumper-lip enquiry based on OE and application data. For 2019 HONDA Civic, Yongshang Auto tracks the requested rear bumper lower garnish as HD02002-021.
HD02002-021 requires an application-specific review: A correct-looking panel can still differ at the side retainers, lower fixings or trim openings, so photographic comparison remains important. This approach reduces dependence on exterior appearance alone.
Workshop Fitment Control
Fitment guidance for 71502-TET-H60. Check that vehicle-side brackets, retainers and absorbers are serviceable. Damaged support parts can create an apparent fit problem that is not caused by the replacement lower-bumper component. That comparison gives the workshop a clearer basis for a pre-paint decision.
The rear location on 2019 HONDA Civic should be reviewed as follows: Compare the curve at each corner and the transition into adjacent body panels. Those areas are useful for distinguishing parts that otherwise appear alike in catalogue thumbnails. That comparison gives the workshop a clearer basis for a pre-paint decision.
Product Technical Specifications
| Product type | Rear Bumper Lower Garnish |
|---|---|
| Primary OE reference | 71502-TET-H60 |
| Cross-reference numbers | 71502-TET-H60 |
| Internal item code | HD02002-021 |
| Vehicle brand | HONDA |
| Vehicle model | Civic |
| Model year | 2019 |
| Installation position | Rear lower bumper area |
| Applicable vehicle | 2019 HONDA Civic |
Assembly Alignment and Visual Finish
Functional context for 71502-TET-H60. the lower-bumper component interfaces with multiple surrounding parts rather than working in isolation. Grille, lamp, moulding and retainer compatibility should be reviewed as part of the repair plan. That comparison gives the workshop a clearer basis for a pre-paint decision.
Application note for item HD02002-021. the lower-bumper component shields internal bumper components from ordinary environmental exposure while presenting the designed outer shape. It should be handled as a large finish-sensitive panel. This approach reduces dependence on exterior appearance alone.
Protecting the Panel During Finishing
Receiving note for carton HD02002-021. Record the condition with dated photographs before workshop preparation. This separates transport observations from marks introduced during trial fitting or refinishing. This evidence belongs in the same approval file as the vehicle photographs.
Pre-finish check for 2019 HONDA Civic. Separate cosmetic surface preparation from fitment approval. Fit, aperture layout and mounting geometry should be accepted first. This sequence keeps catalogue selection separate from cosmetic preparation.
Procurement Notes for Large Body Panels
A quotation for 71502-TET-H60 should reflect this guidance: For a mixed order, provide a line-by-line quantity schedule and a corresponding label format. This helps warehouse teams maintain part identity during consolidation. A dated photo record makes the decision easier to review if questions arise later.
The 1 square image attached to HD02002-021 support visual review. State the acceptable inspection method for surface condition, tabs, openings and general contour. Commercial approval should distinguish cosmetic review from vehicle fitment confirmation. The completed check supports a traceable discussion between buyer and supplier.
Frequently Asked Questions
How should a distributor document OE 71502-TET-H60?
2019 HONDA Civic is the stated reference for this page. Confirm that transferred accessories match the openings and attachment areas on the replacement lower-bumper component. Accessories are reviewed separately unless included in writing. That comparison gives the workshop a clearer basis for a pre-paint decision.
How is supplier code HD02002-021 used during purchasing?
Supplier-code context for this rear bumper lower garnish. Add consignee restrictions, carton-size limits and pallet rules to the initial request. Late packaging changes can affect both cost and achievable container utilisation. Keep HD02002-021 beside 71502-TET-H60 in the final commercial record.
Which observations belong in the fitment comparison record?
Panel-comparison guidance for 2019 HONDA Civic. Use the OE catalogue as the starting point, then compare mounting edges, equipment apertures and corner contours with the original vehicle part before paint. A dated photo record makes the decision easier to review if questions arise later.
What is the recommended sequence before coating the panel?
Finishing guidance for OE 71502-TET-H60. Use the uncoated condition to evaluate corners, upper fixings, lower mounts and trim zones before labour is committed to refinishing. This review is especially useful near model-year or equipment transitions.
What evidence and commercial data support sample approval?
Wholesale request for HD02002-021. Describe inspection criteria for visible surface, tabs, openings and general contour, then state how the approved result will release production. This approach reduces dependence on exterior appearance alone.
Request a Quote for 71502-TET-H60
Confirm the delivery market and preferred transport method. Packing design can differ between sample courier movement, consolidated sea freight and full-container supply. For Yongshang Auto’s review, connect 71502-TET-H60 and HD02002-021 with the intended 2019 HONDA Civic, requested quantity and delivery market.
