71502-TB0-H01 Bumper Trim Molding for HONDA Accord 2013 Right
Primary OE reference: 71502-TB0-H01
Cross-reference number 1: 71502-TB0-H01
Cross-reference number 2: 71502TB0H01
Product: Bumper Trim Molding
Vehicle: HONDA Accord 2013
Installation area: Rear
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-010
Fitment note: confirm the installation position; inspect the original contour; check nearby lamp openings before ordering 71502-TB0-H01
Product comparison: inspect the fastening slots; check the moulding curvature; examine the visible finish against the removed bumper trim molding
Installation note: confirm the final trim gap; review separate hardware needs; retain the removed component on the Accord
Wholesale enquiry: state annual purchasing volume; retain the product label; confirm the packing method for HD02005-010
Application guidance: For replacement work on HONDA Accord 2013, retain the old trim until trial fitting is complete. Also compare every attachment point, review the centre alignment, clean the mounting channel, and confirm sample requirements.
71502-TB0-H01 Bumper Trim Molding Product Overview
OE number 71502-TB0-H01 is the primary lookup key for this bumper trim molding listed for HONDA Accord 2013. The 2013 specification and supplier code HD02005-010 help distinguish it from neighbouring facelift or market variants.
For replacement work on HONDA Accord 2013, retain the old trim until trial fitting is complete. Also compare every attachment point, review the centre alignment, clean the mounting channel, and confirm sample requirements.
Fitment and Application for Accord
Before the removed component is discarded, verify the mounting side, compare every attachment point, and confirm the installation position. Before clips or hardware are transferred, match the bumper outline, compare the removed trim, and confirm the surface specification.
During an OE-led check for HD02005-010, match the bumper outline, check adjacent garnish pieces, and confirm the production year. During the physical comparison, compare every attachment point, check the vehicle build date, and match the original clip spacing.
For wholesale selection of 71502-TB0-H01, match the original clip spacing, inspect the original contour, and review the end profiles. When checking the visible exterior face, match the stated body style, match the bumper outline, and confirm the vehicle market.
Bumper Trim Molding Design and Replacement Notes
When preparing a Accord exterior repair, check the adjoining gap, check the bumper interface, and review the outer-edge shape. For a no-force trial fit, check the moulding curvature, check the panel transition, and check the adjoining gap.
During comparison with the original bumper trim, compare visible edge height, review the centre alignment, and check the adjoining gap. While checking adjacent body parts, inspect the moulding width, compare the end termination, and review transferred hardware.
For a replacement on the right rear area, check the moulding curvature, compare the end termination, and check the panel transition. Before clips or hardware are transferred, compare gloss or plating, check the adjoining gap, and compare the original length.
For a direct comparison of 71502-TB0-H01, verify the mounting side, compare the original edge profile, inspect every screw point, and request supported carton packing. The bumper trim molding should match the original right rear profile before it is installed or released for shipment.
Installation Guidance
Before the removed component is discarded, review the completed alignment, trial-fit without force, and avoid bending long sections. Before the quotation is confirmed, review separate hardware needs, clean the mounting channel, and transfer reusable clips carefully.
During an OE-led check for HD02005-010, trial-fit without force, align the centre first, and inspect damaged mounting points. Before packing the confirmed item, transfer reusable clips carefully, check adjacent panel gaps, and confirm locator engagement.
For wholesale selection of 71502-TB0-H01, avoid bending long sections, confirm the fitting direction, and confirm an even seated fit. For a no-force trial fit, clean the mounting channel, align the centre first, and confirm locator engagement.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71502-TB0-H01 |
| Cross-reference numbers | 71502-TB0-H01 71502TB0H01 |
| Internal item code | HD02005-010 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2013 |
| Installation area | Rear |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Accord 2013 |
Wholesale Supply and Packing
When preparing a Accord exterior repair, include the complete OE number, state the target application, and state the destination port. Before final installation, request supported carton packing, confirm separate accessory needs, and request protective inner packing.
During comparison with the original bumper trim, retain the product label, review carton edge protection, and check the ordered mounting side. During receiving inspection, confirm the packing method, request protective inner packing, and send original-part photographs.
For a replacement on the right rear area, check the ordered mounting side, request protective inner packing, and request supported carton packing. Before the quotation is confirmed, state the target application, request export quotation terms, and provide the delivery country.
For 71502-TB0-H01, align finish acceptance, quantity, delivery schedule and carton protection under item HD02005-010. The verify against the original part surface should be documented before a production lot is released.
Frequently Asked Questions
What product does OE 71502-TB0-H01 identify?
71502-TB0-H01 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Accord, review facelift differences, review the outer-edge shape, avoid bending long sections, and provide the delivery country before installation or quotation.
How should the position of 71502-TB0-H01 be confirmed?
This listing specification details a right component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For Accord, match the bumper outline, inspect narrow moulding ends, support the trim evenly, and confirm the packing method before installation or quotation.
Why should supplier code HD02005-010 stay on the enquiry?
HD02005-010 connects the 71502-TB0-H01 fitment review, quotation, sample and receiving specification details. Keeping it on every revision reduces the risk of mixing similar trim pieces. For Accord, compare the mounting direction, compare the original edge profile, protect painted panel edges, and confirm separate accessory needs before installation or quotation.
Can a photo alone verify 71502-TB0-H01?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71502-TB0-H01 and HD02005-010 with the removed part dimensions. For Accord, inspect the original contour, review transferred hardware, transfer reusable clips carefully, and inspect the receiving condition before installation or quotation.
Is professional installation recommended for 71502-TB0-H01?
Yes. A workshop can dry-fit HD02005-010, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Accord, compare the removed trim, check the moulding curvature, inspect the surrounding guides, and include the complete OE number before installation or quotation.
Request a Quote
Send the complete OE reference 71502-TB0-H01, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
