71502-SDE-T01 Bumper Corner Trim for HONDA Accord 2003 Right
Primary OE reference: 71502-SDE-T01
Cross-reference number 1: 71502-SDE-T01
Cross-reference number 2: 71502SDET01
Product: Bumper Corner Trim
Vehicle: HONDA Accord 2003
Installation area: Rear
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-002
Fitment note: inspect the original contour; review market-specific styling; inspect the original contour before ordering 71502-SDE-T01
Product comparison: compare visible edge height; inspect the locator direction; check the panel transition against the removed bumper corner trim
Installation note: inspect damaged mounting points; avoid bending long sections; confirm the fitting direction on the Accord
Wholesale enquiry: request export quotation terms; confirm the delivery schedule; state the target application for HD02005-002
Application guidance: Before ordering this right trim, compare the old part with 71502-SDE-T01. Also match the original clip spacing, compare gloss or plating, clean the mounting channel, and request protective inner packing.
71502-SDE-T01 Bumper Corner Trim Product Overview
71502-SDE-T01 identifies this bumper corner trim for HONDA Accord 2003. Supplier reference HD02005-002 defines the right application and helps buyers compare the correct exterior profile before ordering.
Before ordering this right trim, compare the old part with 71502-SDE-T01. Also match the original clip spacing, compare gloss or plating, clean the mounting channel, and request protective inner packing.
Fitment and Application for Accord
When separating nearby Accord trim variants, match the stated body style, review market-specific styling, and match the original clip spacing. Before packing the confirmed item, verify the mounting side, check the vehicle build date, and confirm the vehicle market.
When comparing 71502-SDE-T01 with the removed part, confirm the installation position, match the bumper outline, and compare the removed trim. For a no-force trial fit, confirm the surface specification, match the original clip spacing, and confirm the vehicle market.
For the listed 2003 application, confirm the surface specification, compare the complete OE number, and inspect the original contour. While checking adjacent body parts, match the bumper outline, check adjacent garnish pieces, and confirm the production year.
Bumper Corner Trim Design and Replacement Notes
Before sourcing this bumper corner trim for Accord, inspect narrow moulding ends, check the adjoining gap, and review transferred hardware. During receiving inspection, compare the original length, inspect the back-side structure, and check the bumper interface.
Before confirming this verify against the original part bumper corner trim, review nearby cover openings, examine the visible finish, and review the centre alignment. Before the quotation is confirmed, review the surface texture, review transferred hardware, and review nearby cover openings.
For HONDA Accord 2003, inspect the locator direction, compare gloss or plating, and review nearby cover openings. Before packing the confirmed item, check the moulding curvature, inspect narrow moulding ends, and compare visible edge height.
For a direct comparison of 71502-SDE-T01, confirm the installation position, examine the visible finish, clean the mounting channel, and confirm sample requirements. The bumper corner trim should match the original right rear profile before it is installed or released for shipment.
Installation Guidance
When separating nearby Accord trim variants, review the completed alignment, clean the mounting channel, and trial-fit without force. While reviewing the supplied photographs, transfer reusable clips carefully, avoid bending long sections, and inspect every screw point.
When comparing 71502-SDE-T01 with the removed part, trial-fit without force, avoid bending long sections, and review separate hardware needs. Before final installation, clean the mounting channel, transfer reusable clips carefully, and inspect every screw point.
For the listed 2003 application, avoid bending long sections, retain the removed component, and check lamp-cover clearance. During receiving inspection, inspect every screw point, confirm the fitting direction, and protect painted panel edges.
Product Technical Specifications
| Product type | Bumper Corner Trim |
|---|---|
| Primary OE reference | 71502-SDE-T01 |
| Cross-reference numbers | 71502-SDE-T01 71502SDET01 |
| Internal item code | HD02005-002 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2003 |
| Installation area | Rear |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Accord 2003 |
Wholesale Supply and Packing
Before sourcing this bumper corner trim for Accord, confirm the surface requirement, retain the product label, and compare the supplied photographs. At the workshop preparation stage, state the destination port, send original-part photographs, and support the moulding length.
Before confirming this verify against the original part bumper corner trim, confirm sample requirements, confirm the packing method, and confirm the surface requirement. For a repeat wholesale order, review carton edge protection, confirm the delivery schedule, and protect projecting locators.
For HONDA Accord 2003, state annual purchasing volume, state the destination port, and state the required quantity. While reviewing the supplied photographs, include the complete OE number, protect projecting locators, and retain the product label.
A useful RFQ for HD02005-002 identifies 71502-SDE-T01, the rear installation area, the destination country and the planned order quantity. Include photos of the removed piece when fitment is still being reviewed.
Frequently Asked Questions
Does 71502-SDE-T01 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Accord, check nearby lamp openings, inspect the moulding width, review the completed alignment, and protect projecting locators before installation or quotation.
Is a model name alone enough to order 71502-SDE-T01?
No. The Accord name is useful for discovery, but OE number 71502-SDE-T01, VIN or build data, side, finish and physical attachment points should agree. For Accord, confirm the surface specification, compare gloss or plating, retain the removed component, and provide the delivery country before installation or quotation.
What should be inspected when 71502-SDE-T01 arrives?
Check the bumper corner trim part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For Accord, match the stated body style, examine the visible finish, protect the visible surface, and confirm the packing method before installation or quotation.
What information is needed for a 71502-SDE-T01 quotation?
Send HONDA Accord 2003 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Accord, review market-specific styling, check the adjoining gap, review separate hardware needs, and confirm separate accessory needs before installation or quotation.
How should 71502-SDE-T01 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Accord, match the original clip spacing, inspect the locator direction, check adjacent panel gaps, and inspect the receiving condition before installation or quotation.
Request a Quote
Send the complete OE reference 71502-SDE-T01, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
