71501-TM4-H20ZZ Rear Bumper Cover for 2009 HONDA City
Product: Rear Bumper Cover
Primary OE: 71501-TM4-H20ZZ
Item code: HD02001-098
Cross-reference numbers:
71501-TM4-H20ZZ
Brand: HONDA
Model: City
Application reference: 2009 HONDA City
Position: Rear
Verification: Match 71501-TM4-H20ZZ with the VIN, build date, panel outline and equipment openings before refinishing.
Supply note: State mixed-order requirements, carton marks and pre-shipment photo needs at the quotation stage.
71501-TM4-H20ZZ is documented for wholesale enquiries in which OE traceability and application evidence are required. For 2009 HONDA City, Yongshang Auto tracks the requested rear bumper cover as HD02001-098.
HD02001-098 requires an application-specific review: Sensor holes, washer provisions, tow-eye access and lower-grille geometry may vary even within the same model family. This evidence belongs in the same approval file as the vehicle photographs.
Vehicle Record and Panel Comparison
Fitment guidance for 71501-TM4-H20ZZ. If the original cover is missing, provide VIN data and clear photographs of the uncovered vehicle structure. The supplier may need additional evidence before confirming the reference. The purchase team can use the recorded result when confirming the order line.
The rear location on 2009 HONDA City should be reviewed as follows: Verify whether the request is for the upper cover, lower cover or complete outer cover. The purchase description should match the physical section needed by the repair. This evidence belongs in the same approval file as the vehicle photographs.
Product Technical Specifications
| Product type | Rear Bumper Cover |
|---|---|
| Primary OE reference | 71501-TM4-H20ZZ |
| Internal item code | HD02001-098 |
| Vehicle brand | HONDA |
| Vehicle model | City |
| Application reference | 2009 HONDA City |
| Installation position | Rear |
| Cross-reference numbers | 71501-TM4-H20ZZ |
| Fitment approval | OE number, VIN, production date, body contour, mounting tabs and equipment openings |
Collision-Repair Application
Functional context for 71501-TM4-H20ZZ. The outer cover contributes to styling and low-speed surface protection, but it is not a substitute for the reinforcement system. Buyers should quote each required assembly part separately. The completed check supports a traceable discussion between buyer and supplier.
Application note for item HD02001-098. A replacement cover allows a body shop to rebuild the exterior line without treating the part as structural reinforcement. Reinforcement bars and absorbers remain separate assembly elements. This sequence keeps catalogue selection separate from cosmetic preparation.
Condition Review Before Production Use
Receiving note for carton HD02001-098. Complete a dry installation using the intended retainers and brackets. Review panel gaps and equipment openings before applying primer, paint or adhesive accessories. This sequence keeps catalogue selection separate from cosmetic preparation.
Pre-finish check for 2009 HONDA City. Allow the panel to rest in a supported position after unpacking, especially when transport packaging has constrained its shape. Compare the relaxed outline with the original before making a fit judgement. This review is especially useful near model-year or equipment transitions.
Information for Distributors and Importers
A quotation for 71501-TM4-H20ZZ should reflect this guidance: If colours, mouldings or accessories are shown in reference photographs, clarify whether they are included. The listing describes the outer cover unless a quotation states otherwise. The buyer can then connect the physical review to the supplier item record.
The 1 square image attached to HD02001-098 support visual review. Identify any barcode, carton mark or language requirement in advance. The agreed label should retain both the buyer reference and the supplier item code. That comparison gives the workshop a clearer basis for a pre-paint decision.
Frequently Asked Questions
How should a buyer confirm OE 71501-TM4-H20ZZ?
2009 HONDA City is the stated reference for this page. Check the OE reference first and use physical evidence second. Do not approve from an online image or exterior colour alone. The repairer should document the outcome before transferring trim components.
How should a distributor quote reference HD02001-098?
Supplier-code context for this rear bumper cover. Provide the expected packaging method, label language and pallet requirements. Buyers should also identify any inspection standard that must appear on the order file. Keep HD02001-098 beside 71501-TM4-H20ZZ in the final commercial record.
How can the repairer review the cover beyond its front-facing appearance?
Panel-comparison guidance for 2009 HONDA City. If the old cover is unavailable, provide VIN details and clear photographs of the uncovered bumper assembly so the supplier can request further evidence. This sequence keeps catalogue selection separate from cosmetic preparation.
What must happen before paint is applied to 71501-TM4-H20ZZ?
Finishing guidance for OE 71501-TM4-H20ZZ. The body shop should verify the complete assembly interface before any irreversible preparation is carried out. A dated photo record makes the decision easier to review if questions arise later.
Which order data helps Yongshang Auto review 71501-TM4-H20ZZ?
Wholesale request for HD02001-098. Keep the OE reference and internal code on every enquiry revision, purchase order and packing confirmation to reduce mix-ups during consolidation. The buyer can then connect the physical review to the supplier item record.
Request a Quote for 71501-TM4-H20ZZ
When purchasing for distribution, list the target model years and sales markets. That context helps identify catalogue transitions that deserve additional verification. For Yongshang Auto’s review, connect 71501-TM4-H20ZZ and HD02001-098 with the intended 2009 HONDA City, requested quantity and delivery market.
