71501-T6P-H00ZZ Rear Bumper Cover for 2013 HONDA Crider
Product: Rear Bumper Cover
Primary OE: 71501-T6P-H00ZZ
Item code: HD02001-102
Cross-reference numbers:
71501-T6P-H00ZZ
Brand: HONDA
Model: Crider
Application reference: 2013 HONDA Crider
Position: Rear
Verification: Compare the old cover with 71501-T6P-H00ZZ, including corners, tabs, grille zones, lamp areas and optional-equipment apertures.
Supply note: Keep 71501-T6P-H00ZZ and HD02001-102 on the enquiry, purchase order and packing confirmation.
71501-T6P-H00ZZ is catalogued for body-shop enquiries that begin with an exact OE-number match. For 2013 HONDA Crider, Yongshang Auto tracks the requested rear bumper cover as HD02001-102.
HD02001-102 requires an application-specific review: Body-line alignment depends on the surrounding retainers and brackets as well as the cover itself, making vehicle-side inspection essential. That comparison gives the workshop a clearer basis for a pre-paint decision.
Body-Panel Match Procedure
Fitment guidance for 71501-T6P-H00ZZ. Use a photograph set that shows the entire old cover, both corners, the upper edge, the lower edge and every equipment opening. This allows the supplier to compare visible geometry instead of relying on a model name. This sequence keeps catalogue selection separate from cosmetic preparation.
The rear location on 2013 HONDA Crider should be reviewed as follows: Use a photograph set that shows the entire old cover, both corners, the upper edge, the lower edge and every equipment opening. This allows the supplier to compare visible geometry instead of relying on a model name. The repairer should document the outcome before transferring trim components.
Product Technical Specifications
| Product type | Rear Bumper Cover |
|---|---|
| Primary OE reference | 71501-T6P-H00ZZ |
| Internal item code | HD02001-102 |
| Vehicle brand | HONDA |
| Vehicle model | Crider |
| Application reference | 2013 HONDA Crider |
| Installation position | Rear |
| Cross-reference numbers | 71501-T6P-H00ZZ |
| Fitment approval | OE number, VIN, production date, body contour, mounting tabs and equipment openings |
Exterior Panel Replacement Objective
Functional context for 71501-T6P-H00ZZ. The cover shields internal bumper components from ordinary environmental exposure while presenting the designed outer shape. It should be handled as a large finish-sensitive panel. The result should be recorded before commercial release of the requested quantity.
Application note for item HD02001-102. Because the component spans a wide area of the vehicle, small mounting differences can affect several gaps at once. Correct reference selection is therefore more reliable than visual guessing. The completed check supports a traceable discussion between buyer and supplier.
Incoming Inspection and Workshop Handling
Receiving note for carton HD02001-102. If the panel has been folded or closely packed for freight, follow the agreed recovery method and allow sufficient time before measuring the final contour. The buyer can then connect the physical review to the supplier item record.
Pre-finish check for 2013 HONDA Crider. Check for transit pressure marks, edge distortion, scratches and incomplete apertures. Photograph any concern before sanding, drilling, trimming or painting changes the supplied condition. A dated photo record makes the decision easier to review if questions arise later.
Wholesale Enquiry Information
A quotation for 71501-T6P-H00ZZ should reflect this guidance: Send a clear old-part photograph together with the vehicle application. This gives the commercial team a practical comparison record before confirming price and lead time. This approach reduces dependence on exterior appearance alone.
The 1 square image attached to HD02001-102 support visual review. Keep OE confirmation, photographs, sample findings and packing approval in one purchase file. This creates continuity from quotation through final receipt. Those observations should remain available during sample and bulk-order review.
Frequently Asked Questions
What should be compared before approving OE 71501-T6P-H00ZZ?
2013 HONDA Crider is the stated reference for this page. Request a full photographic record of the old cover and vehicle. Include labels, side retainers, upper fixings, lower mounts and all grille or lamp openings. The purchase team can use the recorded result when confirming the order line.
What does the Yongshang Auto reference HD02001-102 identify?
Supplier-code context for this rear bumper cover. Quote the item code on every revision of the enquiry. Traceable references reduce confusion when several front, rear, upper or lower covers are reviewed together. Keep HD02001-102 beside 71501-T6P-H00ZZ in the final commercial record.
What should the body shop inspect before accepting the outline?
Panel-comparison guidance for 2013 HONDA Crider. Confirm model year, market version, body style and installed equipment. A workshop trial alignment should follow before surface finishing. This review is especially useful near model-year or equipment transitions.
When is the workshop ready to prepare the visible surface?
Finishing guidance for OE 71501-T6P-H00ZZ. The workshop should accept contour, attachment points and accessory interfaces before primer, paint, drilling or trimming begins. This sequence keeps catalogue selection separate from cosmetic preparation.
How can a buyer make the supply request traceable?
Wholesale request for HD02001-102. Reference the exact application together with packaging limits and the intended sales market. These details help separate fitment review from freight planning. The result should be recorded before commercial release of the requested quantity.
Request a Quote for 71501-T6P-H00ZZ
If colours, mouldings or accessories are shown in reference photographs, clarify whether they are included. The listing describes the outer cover unless a quotation states otherwise. For Yongshang Auto’s review, connect 71501-T6P-H00ZZ and HD02001-102 with the intended 2013 HONDA Crider, requested quantity and delivery market.
