71501-S9E-013-C Rear Bumper Cover for 2005 HONDA CR-V
Product: Rear Bumper Cover
Primary OE: 71501-S9E-013-C
Item code: HD02001-119
Cross-reference numbers:
71501-S9E-013-C
Brand: HONDA
Model: CR-V
Application reference: 2005 HONDA CR-V
Position: Rear
Verification: Check VIN, model year, body contour and every functional opening before paint or permanent modification.
Supply note: Keep 71501-S9E-013-C and HD02001-119 on the enquiry, purchase order and packing confirmation.
71501-S9E-013-C supports replacement-panel purchasing when buyers need a traceable application reference. For 2005 HONDA CR-V, Yongshang Auto tracks the requested rear bumper cover as HD02001-119.
HD02001-119 requires an application-specific review: The application record narrows the search, while final acceptance still depends on the exact vehicle configuration and original panel. The completed check supports a traceable discussion between buyer and supplier.
Repair-Shop Approval Sequence
Fitment guidance for 71501-S9E-013-C. Confirm whether the vehicle carries parking sensors, front camera equipment, headlamp washers, fog lamps, reflectors or special mouldings. Each feature can change the required holes, brackets or trim interfaces. The buyer can then connect the physical review to the supplier item record.
The rear location on 2005 HONDA CR-V should be reviewed as follows: Check that vehicle-side brackets, retainers and absorbers are serviceable. Damaged support parts can create an apparent fit problem that is not caused by the replacement cover. The same information helps receiving staff identify the correct carton and panel.
Product Technical Specifications
| Product type | Rear Bumper Cover |
|---|---|
| Primary OE reference | 71501-S9E-013-C |
| Internal item code | HD02001-119 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Application reference | 2005 HONDA CR-V |
| Installation position | Rear |
| Cross-reference numbers | 71501-S9E-013-C |
| Fitment approval | OE number, VIN, production date, body contour, mounting tabs and equipment openings |
Interface With Adjacent Components
Functional context for 71501-S9E-013-C. This service part is commonly used in collision repair, refurbishment and wholesale replacement programmes. Its suitability still depends on the specific vehicle and equipment configuration. This approach reduces dependence on exterior appearance alone.
Application note for item HD02001-119. Replacement is intended to return the outer bumper area to its designed form. Structural crash components must be inspected independently and replaced when required. This evidence belongs in the same approval file as the vehicle photographs.
Panel Inspection Prior to Paint
Receiving note for carton HD02001-119. Use clean gloves and padded supports during handling. Protecting the finish area reduces rework and keeps the inspection record clear for buyer and supplier. This approach reduces dependence on exterior appearance alone.
Pre-finish check for 2005 HONDA CR-V. Keep the panel wrapped until a clean inspection area is available. Dust, metal filings and nearby body-shop work can mark the visible surface before painting starts. The repairer should document the outcome before transferring trim components.
Buyer Checklist for an Export Order
A quotation for 71501-S9E-013-C should reflect this guidance: State whether the order is a sample, mixed-model shipment or repeat programme. Bumper covers are volume-sensitive, so carton and loading assumptions should be discussed before the freight quotation. The purchase team can use the recorded result when confirming the order line.
The 3 square images attached to HD02001-119 support visual review. Ask for pre-shipment photographs when the purchase programme requires packaging approval. The record should show item labels, carton condition and loading arrangement. This review is especially useful near model-year or equipment transitions.
Frequently Asked Questions
Why must the workshop verify OE 71501-S9E-013-C?
2005 HONDA CR-V is the stated reference for this page. Compare the new panel in an unpainted trial fit using serviceable vehicle-side brackets. Stop if gaps or mounting points require force. This review is especially useful near model-year or equipment transitions.
Why should the enquiry retain both HD02001-119 and 71501-S9E-013-C?
Supplier-code context for this rear bumper cover. Confirm the delivery market and preferred transport method. Packing design can differ between sample courier movement, consolidated sea freight and full-container supply. Keep HD02001-119 beside 71501-S9E-013-C in the final commercial record.
What attachment points deserve attention during a dry fit?
Panel-comparison guidance for 2005 HONDA CR-V. Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. The same information helps receiving staff identify the correct carton and panel.
What condition should be met before permanent modification?
Finishing guidance for OE 71501-S9E-013-C. The workshop should accept contour, attachment points and accessory interfaces before primer, paint, drilling or trimming begins. This approach reduces dependence on exterior appearance alone.
What information should accompany a commercial request for HD02001-119?
Wholesale request for HD02001-119. Reference the exact application together with packaging limits and the intended sales market. These details help separate fitment review from freight planning. The same information helps receiving staff identify the correct carton and panel.
Request a Quote for 71501-S9E-013-C
Quote the item code on every revision of the enquiry. Traceable references reduce confusion when several front, rear, upper or lower covers are reviewed together. For Yongshang Auto’s review, connect 71501-S9E-013-C and HD02001-119 with the intended 2005 HONDA CR-V, requested quantity and delivery market.
