71190-TFT-H00 Front Left Headlight Mounting Bracket for HONDA Vezel 2019

71190-TFT-H00 Front Left Headlight Mounting Bracket Product Overview

The component shown under 71190-TFT-H00 is a front left headlight mounting bracket intended for HONDA Vezel 2019. Confirm the left orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Vezel

When comparing 71190-TFT-H00 with the removed component, compare the complete OE marking with the removed part, verify the trim package named in the application, and review the orientation of the moulded bracket. For an application-specific order, retain the original component for a direct comparison, match the accessory to the original bumper revision, and confirm the destination-market version.

For the listed 2019 application, compare every locating point and screw opening, review the orientation of the moulded bracket, and compare the headlight outline at both ends. During receiving inspection, check the lamp manufacturer where multiple units were fitted, retain the original component for a direct comparison, and compare adjacent bumper and grille sections.

Before the original trim or bracket is discarded, compare adjacent bumper and grille sections, compare the complete OE marking with the removed part, and compare the installation direction. When organizing mixed-OE inventory, retain the original component for a direct comparison, check whether the original part is mirrored, and match the outer profile around the headlamp.

Headlight Mounting Bracket Design and Replacement Notes

Before confirming this headlight accessory, check the curvature beside the headlamp, review fastening slots and clip seats, and inspect reinforcement features behind the part. For a repeat wholesale purchase, compare reusable clips and hardware, check the interface with the lamp housing, and inspect the overall frame width.

For a body-shop order covering HONDA, inspect reinforcement features behind the part, check mirrored geometry against the required side, and compare the centre alignment point. During the physical comparison, compare mounting-hole height, inspect the visible face for transport scuffing, and compare reusable clips and hardware.

When comparing 71190-TFT-H00 with the removed component, check the interface with the lamp housing, inspect both end geometries, and inspect the junction with the fender edge. When checking the headlamp opening, review nearby cover openings, review fastening slots and clip seats, and check the depth of the moulded locator channels.

Application-Specific Identification

For an export quotation with 71190-TFT-H00 on the Vezel 2019: match the accessory to the original bumper revision. The HD02009-114 sample for the left side should check the transition to the bumper or grille. Before installation, confirm that the hood and fender clearances remain even; for a quotation, request protective inner wrapping.

A trim-level comparison requires with 71190-TFT-H00 on the Vezel 2019: check the relationship with the lamp housing. The HD02009-114 sample for the left side should inspect the junction with the fender edge. Before installation, keep the removed part nearby for comparison; for a quotation, review edge protection inside the carton.

When the headlamp outline is reviewed with 71190-TFT-H00 on the Vezel 2019: check whether the original part is mirrored. The HD02009-114 sample for the left side should compare surrounding grille openings. Before installation, clean the lamp and bumper mounting area; for a quotation, confirm the requested delivery schedule.

Installation Guidance

When reviewing the visible finish on HD02009-114, check the final perimeter around the lamp, replace distorted clips before final assembly, and reconfirm the OE reference after the trial fit. For a no-force trial fit, transfer reusable clips carefully, review whether separate hardware is needed, and compare the installed height with the opposite side.

Before sourcing this front left headlight mounting bracket, tighten hardware only after alignment, align the headlamp edge before fastening, and complete a visual check under even lighting. While checking adjacent body parts, inspect broken vehicle-side mounts, compare the installed height with the opposite side, and transfer reusable clips carefully.

Before confirming this headlight accessory, reinstall removed seals in their original positions, inspect the lamp aim after surrounding parts are refitted, and reconfirm the OE reference after the trial fit. Before the quotation is confirmed, clean the lamp and bumper mounting area, trial-fit the component without force, and transfer reusable clips carefully.

Product Technical Specifications

Wholesale Supply and Packing

For replacement in the left front headlamp area, support long trim sections during transit, specify whether the order is for service stock or a project, and state the required order quantity. When organizing mixed-OE inventory, request the applicable export terms, state any outer-carton marking requirements, and confirm sample-order requirements.

When separating nearby Vezel variants, confirm whether clips are required separately, compare the supplied product photographs, and check the ordered mounting side. While reviewing the supplied photographs, state estimated annual purchasing volume, request the applicable export terms, and confirm the packing method.

When reviewing the visible finish on HD02009-114, state the destination port or city, state whether left and right pairs should be bundled, and request a packing-list breakdown by item code. Before final installation, request supported export-carton packing, compare the supplied product photographs, and identify mixed-OE orders clearly.

Frequently Asked Questions

Which vehicle application is listed for 71190-TFT-H00?

71190-TFT-H00 is listed for HONDA Vezel 2019. The complete OE reference, production year, body specification and mounting side should agree with the removed component. For Vezel, inspect the original lamp-support geometry; check the transition to the bumper or grille; ensure that all removed hardware is accounted for; and separate left and right items in the packing list before fitting or quotation.

How should 71190-TFT-H00 be packed for export?

The front left headlight mounting bracket should be supported inside the carton, with projecting tabs, narrow ends and visible surfaces protected against abrasion and compression. For Vezel, compare the headlight outline at both ends; inspect reinforcement features behind the part; protect painted and chrome surfaces; and confirm the required finish before fitting or quotation.

Is a sample order available for 71190-TFT-H00?

Sample and wholesale arrangements can be discussed after the OE reference, vehicle application, required side, quantity and destination are provided. For Vezel, verify the trim package named in the application; check the adjoining panel gap; inspect broken vehicle-side mounts; and provide the consignee contact information before fitting or quotation.

What information should be sent with a 71190-TFT-H00 enquiry?

Send the complete OE number, vehicle details, installation side, photographs of the original part, quantity and delivery destination. For Vezel, check whether the original part is mirrored; measure the removed part where references are unclear; confirm that every locator engages; and retain the product and carton labels before fitting or quotation.

Should damaged vehicle-side mounts be checked before fitting 71190-TFT-H00?

Yes. Broken lamp tabs, distorted bumper guides or missing retainers can prevent correct alignment even when the replacement reference is correct. For Vezel, compare the stamped or moulded reference; check the interface with the lamp housing; check lamp-to-trim clearance; and request moisture protection for sea freight before fitting or quotation.

Request a Quote

Send the complete OE reference 71190-TFT-H00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.