71190-T9A-T00 Front Left Headlight Mounting Bracket for HONDA City 2015

71190-T9A-T00 Front Left Headlight Mounting Bracket Product Overview

The component shown under 71190-T9A-T00 is a front left headlight mounting bracket intended for HONDA City 2015. Confirm the left orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for City

During comparison with the original lamp surround, compare the installation direction, confirm the destination-market version, and inspect the original lamp-support geometry. While checking adjacent body parts, compare the headlight outline at both ends, verify the trim package named in the application, and check whether the original part is mirrored.

Before confirming export packing for 71190-T9A-T00, compare the stamped or moulded reference, review regional specification differences, and compare adjacent bumper and grille sections. Before the quotation is confirmed, verify the trim package named in the application, confirm the exact model year before placing the order, and match the outer profile around the headlamp.

During an OE-led review for HD02009-064, compare the complete OE marking with the removed part, inspect the original lamp-support geometry, and review facelift and pre-facelift styling. Before packing the confirmed item, verify that the grille design matches the stated application, confirm the destination-market version, and confirm the front installation position.

Headlight Mounting Bracket Design and Replacement Notes

For HONDA City 2015, inspect reinforcement features behind the part, review nearby cover openings, and inspect moulded corners before installation. While reviewing the supplied photographs, inspect the visible face for transport scuffing, review fastening slots and clip seats, and measure the removed part where references are unclear.

When preparing a City body repair, check the interface with the lamp housing, compare the original edge profile, and inspect the overall frame width. Before final installation, compare the centre alignment point, compare surrounding grille openings, and check the transition to the bumper or grille.

During comparison with the original lamp surround, compare surrounding grille openings, check mirrored geometry against the required side, and inspect moulded corners before installation. At the workshop preparation stage, review the thickness around each mounting boss, compare the profile below the lamp lens, and inspect the junction with the fender edge.

Application-Specific Identification

For application-specific sourcing with 71190-T9A-T00 on the City 2015: verify the left or right mounting side. The HD02009-064 sample for the left side should confirm decorative surface details. Before installation, inspect broken vehicle-side mounts; for a quotation, inspect the carton at receiving.

For application-specific sourcing with 71190-T9A-T00 on the City 2015: verify the left or right mounting side. The HD02009-064 sample for the left side should inspect the moulded front face and rear ribs. Before installation, verify that the headlamp remains centred; for a quotation, provide the destination country.

For application-specific sourcing with 71190-T9A-T00 on the City 2015: review facelift and pre-facelift styling. The HD02009-064 sample for the left side should inspect the overall frame width. Before installation, avoid bending narrow moulded tabs; for a quotation, state the target vehicle application.

Installation Guidance

For the listed 2015 application, protect painted and chrome surfaces, review whether separate hardware is needed, and reinstall removed seals in their original positions. Before the carton is sealed, align the headlamp edge before fastening, confirm an evenly seated fit, and use hand pressure only during the initial engagement.

Before the original trim or bracket is discarded, confirm that every locator engages, confirm that the hood and fender clearances remain even, and confirm the correct fitting direction. Before clips or hardware are transferred, reconfirm the OE reference after the trial fit, review completed left-to-right alignment, and protect painted and chrome surfaces.

For HONDA City 2015, protect exposed edges during removal, verify that the headlamp remains centred, and reinstall removed seals in their original positions. At the alignment stage, photograph the completed installation for order records, inspect broken vehicle-side mounts, and inspect each screw or clip point.

Product Technical Specifications

Wholesale Supply and Packing

For a body-shop order covering HONDA, request protective inner wrapping, confirm replacement-part documentation needs, and confirm the packing method. Before packing the confirmed item, request a packing-list breakdown by item code, check the ordered mounting side, and state any outer-carton marking requirements.

When comparing 71190-T9A-T00 with the removed component, provide the consignee contact information, confirm the preferred incoterm, and confirm pallet requirements for larger quantities. For an application-specific order, confirm the nominated freight forwarder, agree the acceptable delivery window, and provide the destination country.

For the listed 2015 application, confirm pallet requirements for larger quantities, request supported export-carton packing, and confirm the packing method. During receiving inspection, list every OE reference on the purchase order, include the complete OE reference, and state estimated annual purchasing volume.

Frequently Asked Questions

How should 71190-T9A-T00 be packed for export?

The front left headlight mounting bracket should be supported inside the carton, with projecting tabs, narrow ends and visible surfaces protected against abrasion and compression. For City, compare every locating point and screw opening; review narrow tips for transport damage; protect exposed edges during removal; and compare the supplied product photographs before fitting or quotation.

Is a sample order available for 71190-T9A-T00?

Sample and wholesale arrangements can be discussed after the OE reference, vehicle application, required side, quantity and destination are provided. For City, compare adjacent bumper and grille sections; compare the original edge profile; verify that the headlamp remains centred; and list every OE reference on the purchase order before fitting or quotation.

What information should be sent with a 71190-T9A-T00 enquiry?

Send the complete OE number, vehicle details, installation side, photographs of the original part, quantity and delivery destination. For City, confirm the destination-market version; inspect moulded corners before installation; reinstall removed seals in their original positions; and support long trim sections during transit before fitting or quotation.

Should damaged vehicle-side mounts be checked before fitting 71190-T9A-T00?

Yes. Broken lamp tabs, distorted bumper guides or missing retainers can prevent correct alignment even when the replacement reference is correct. For City, review headlamp shape changes between production phases; inspect the back-side support structure; photograph the completed installation for order records; and specify whether the order is for service stock or a project before fitting or quotation.

Can photographs alone confirm 71190-T9A-T00 compatibility?

Photographs are useful for visual comparison, but the OE reference, model year, side, trim level and mounting geometry should also match. For City, confirm the exact model year before placing the order; inspect both end geometries; inspect broken vehicle-side mounts; and state the required order quantity before fitting or quotation.

Request a Quote

Send the complete OE reference 71190-T9A-T00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.