71190-T7A-000 Front Left Headlight Mounting Bracket for HONDA Vezel 2014

71190-T7A-000 Front Left Headlight Mounting Bracket Product Overview

The component shown under 71190-T7A-000 is a front left headlight mounting bracket intended for HONDA Vezel 2014. Confirm the left orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Vezel

When separating nearby Vezel variants, review headlamp shape changes between production phases, confirm the decorative finish or painted surface, and verify the left or right mounting side. While reviewing the supplied photographs, compare the stamped or moulded reference, review the orientation of the moulded bracket, and review regional specification differences.

When reviewing the visible finish on HD02009-102, confirm the exact model year before placing the order, verify the left or right mounting side, and check the relationship with the lamp housing. Before final installation, match the outer profile around the headlamp, review the orientation of the moulded bracket, and match the locator-slot arrangement.

Before sourcing this front left headlight mounting bracket, check the relationship with the lamp housing, compare the headlight outline at both ends, and verify the left or right mounting side. At the workshop preparation stage, compare the installation direction, confirm the exact model year before placing the order, and confirm the decorative finish or painted surface.

Headlight Mounting Bracket Design and Replacement Notes

During left-versus-right inventory selection, review the direction of the locating tabs, check the curvature beside the headlamp, and compare the centre alignment point. Before the carton is sealed, inspect both end geometries, review fastening slots and clip seats, and check the transition to the bumper or grille.

For replacement in the left front headlamp area, compare the visible texture and finish, compare mounting-hole height, and inspect the junction with the fender edge. Before clips or hardware are transferred, compare the centre alignment point, measure the removed part where references are unclear, and check mirrored geometry against the required side.

When separating nearby Vezel variants, inspect the back-side support structure, review the direction of the locating tabs, and compare surrounding grille openings. At the alignment stage, inspect reinforcement features behind the part, compare gloss level with the neighbouring trim, and review nearby cover openings.

Application-Specific Identification

For application-specific sourcing with 71190-T7A-000 on the Vezel 2014: compare adjacent bumper and grille sections. The HD02009-102 sample for the left side should review narrow tips for transport damage. Before installation, verify that no fastener is cross-threaded; for a quotation, confirm the packing method.

For application-specific sourcing with 71190-T7A-000 on the Vezel 2014: review the orientation of the moulded bracket. The HD02009-102 sample for the left side should confirm decorative surface details. Before installation, align the headlamp edge before fastening; for a quotation, state the required order quantity.

For application-specific sourcing with 71190-T7A-000 on the Vezel 2014: inspect the original lamp-support geometry. The HD02009-102 sample for the left side should review fastening slots and clip seats. Before installation, tighten hardware only after alignment; for a quotation, confirm replacement-part documentation needs.

Installation Guidance

During an OE-led review for HD02009-102, check that no locator is trapped behind the bumper, reconfirm the OE reference after the trial fit, and align the headlamp edge before fastening. Before packing the confirmed item, check lamp-to-trim clearance, review completed left-to-right alignment, and replace distorted clips before final assembly.

For wholesale selection of 71190-T7A-000, check the finish for tool marks before delivery, confirm the correct fitting direction, and use hand pressure only during the initial engagement. For an application-specific order, keep the removed part nearby for comparison, check that no locator is trapped behind the bumper, and check the adjoining panel gaps.

During left-versus-right inventory selection, protect painted and chrome surfaces, trial-fit the component without force, and align the headlamp edge before fastening. During receiving inspection, inspect broken vehicle-side mounts, transfer reusable clips carefully, and check the adjoining panel gaps.

Product Technical Specifications

Wholesale Supply and Packing

During comparison with the original lamp surround, confirm barcode or private-label requirements, agree the acceptable delivery window, and state the target vehicle application. At the workshop preparation stage, specify whether the order is for service stock or a project, request a packing-list breakdown by item code, and retain the product and carton labels.

Before confirming export packing for 71190-T7A-000, request moisture protection for sea freight, review edge protection inside the carton, and confirm pallet requirements for larger quantities. For a repeat wholesale purchase, confirm whether clips are required separately, state any outer-carton marking requirements, and compare the supplied product photographs.

During an OE-led review for HD02009-102, check sample approval before mass shipment, confirm the required finish, and state the target vehicle application. During the physical comparison, confirm the packing method, request corner protection for long moulded parts, and request moisture protection for sea freight.

Frequently Asked Questions

Are clips and screws supplied with 71190-T7A-000?

The supply scope follows the photographs. Reusable clips, screws, retainers or separate brackets should be confirmed before the order is finalized. For Vezel, verify the trim package named in the application; check mirrored geometry against the required side; ensure that all removed hardware is accounted for; and state estimated annual purchasing volume before fitting or quotation.

Which side uses 71190-T7A-000?

This front left headlight mounting bracket is catalogued for the left front headlamp area. Opposite-side parts normally use mirrored geometry and a different reference. For Vezel, inspect the original lamp-support geometry; inspect the moulded front face and rear ribs; protect painted and chrome surfaces; and compare the supplied product photographs before fitting or quotation.

What should be inspected when 71190-T7A-000 arrives?

Check the item label, contour, finish, locating features, mounting points and carton condition before fitting or discarding the packaging. For Vezel, compare the installation direction; inspect reinforcement features behind the part; inspect broken vehicle-side mounts; and review edge protection inside the carton before fitting or quotation.

Which vehicle application is listed for 71190-T7A-000?

71190-T7A-000 is listed for HONDA Vezel 2014. The complete OE reference, production year, body specification and mounting side should agree with the removed component. For Vezel, check nearby body-panel interfaces; inspect the overall frame width; confirm that every locator engages; and confirm sample-order requirements before fitting or quotation.

How should 71190-T7A-000 be packed for export?

The front left headlight mounting bracket should be supported inside the carton, with projecting tabs, narrow ends and visible surfaces protected against abrasion and compression. For Vezel, review the orientation of the moulded bracket; check the depth of the moulded locator channels; check lamp-to-trim clearance; and inspect the carton at receiving before fitting or quotation.

Request a Quote

Send the complete OE reference 71190-T7A-000, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.