71180-T70-H01 Front Bumper Grille for HONDA Breeze 2020
Manufacturer: HONDA
Application model: Breeze (2020)
Listed vehicle: 2020 HONDA Breeze; verify by VIN and original part
Bumper location: Front bumper area
Cross references:
71180-T70-H01
Buyer check: Use the original part number and vehicle production data as evidence
Order information: Request sample, lot quantity, destination and packing terms in the enquiry
Item-specific review: 71180-T70-H01 on Breeze uses HD02004-042 as the controlled front-bumper line; compare Breeze frame contour, 71180-T70-H01 mesh geometry and HD02004-042 attachment direction
Approval record: HD02004-042 should link the 2020 HONDA Breeze vehicle evidence to 71180-T70-H01; retain Breeze opening photos and front grille measurements with the buyer decision
Item type: Front Bumper Grille for 2020 HONDA Breeze
OEM number: 71180-T70-H01 as the primary lookup number
Supplier code: HD02004-042 for quotation and order tracking
71180-T70-H01 Front Bumper Grille Product Overview
71180-T70-H01 identifies this front bumper grille for 2020 HONDA Breeze. The record links OE-led search intent with supplier code HD02004-042, a precise vehicle reference and the photographs saved with the source item.
Inspection, Packaging and Receiving Control
For HD02004-042, quality control begins with identity: confirm 71180-T70-H01 and the stated front bumper grille. Next review deformation, edge damage, mounting features and colour or texture consistency under neutral light.
For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.
Breeze Bumper Grille Function and Position
The listed grille belongs to the front bumper stack of the Breeze. Its geometry can affect panel gaps, adjacent trim seating and the clear air-entry area.
The original product row specifies 20 BREEZE 前杠网格. Procurement teams should keep this source note with the English fitment record when reviewing neighbouring versions.
Workshop Handling and Installation Review
A workshop should dry-fit HD02004-042 to the Breeze before final assembly. Check centre alignment, side returns and access to lamps, covers or sensors around the front bumper.
Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.
OE-Led Fitment Verification for 71180-T70-H01
Begin with the complete 71180-T70-H01 number, then check 2020 HONDA Breeze and the front mounting location. Compare the old grille with item HD02004-042 for tab count, edge shape, openings and surrounding trim interfaces.
Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.
Product-Specific Approval Record for 71180-T70-H01
The following review points belong to HD02004-042 and the stated 2020 HONDA Breeze application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.
- Workshop checkpoint 1 — 2020 HONDA Breeze / HD02004-042: photograph every locator before the damaged grille leaves the workshop for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Receiving record 2 — 71180-T70-H01 / HD02004-042: inspect side returns for the same depth and fastening direction for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Fitment file 3 — Breeze / 71180-T70-H01: compare clip spacing without bending the replacement grille for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Geometry control 4 — HD02004-042 / Front: retain a signed control sample for repeat purchasing decisions for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Sample decision 5 — 2020 HONDA Breeze / HD02004-042: compare adjacent moulding gaps before locking the centre clips for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Order trace 6 — 71180-T70-H01 / HD02004-042: inspect mounting slots for collision distortion before trial fitting for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Vehicle evidence 7 — Breeze / 71180-T70-H01: verify the photographed part and physical sample share one revision for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Catalogue proof 8 — HD02004-042 / Front: record the mesh orientation alongside the vehicle production label for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Packing control 9 — 2020 HONDA Breeze / HD02004-042: mark lamp or trim interfaces on the buyer approval photograph for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Identity gate 10 — 71180-T70-H01 / HD02004-042: note surface texture under neutral lighting before installation for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Workshop checkpoint 11 — Breeze / 71180-T70-H01: link receiving photographs to the commercial order-line number for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Receiving record 12 — HD02004-042 / Front: record any market-specific openings shown on the original bumper for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Fitment file 13 — 2020 HONDA Breeze / HD02004-042: match the grille outline to the stated body style and facelift for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Geometry control 14 — 71180-T70-H01 / HD02004-042: measure the outer frame before comparing the retained bumper aperture for Breeze item HD02004-042 under OE reference 71180-T70-H01.
- Sample decision 15 — Breeze / 71180-T70-H01: check the centre section against the bumper cover reference points for Breeze item HD02004-042 under OE reference 71180-T70-H01.
Application Evidence Narrative for HD02004-042
This application-led listing presents 71180-T70-H01 as a front bumper grille for 2020 HONDA Breeze. Item HD02004-042 is intended for OE-number comparison, not shape-only selection.
The front grille area is sensitive to trim and market changes. For this Breeze item, frame dimensions, mesh layout and mounting tabs must agree with the original component.
71180-T70-H01 identifies this front bumper grille for 2020 HONDA Breeze. The record links OE-led search intent with supplier code HD02004-042, a precise vehicle reference and the photographs saved with the source item.
Mounted in the front bumper area, a front bumper grille completes a defined opening and supports the intended visual and airflow path of the Breeze. Its perimeter, mesh pattern and fastening points are vehicle-specific.
Reference 71180-T70-H01 connects the pictured front bumper grille to 2020 HONDA Breeze. Its internal line code, HD02004-042, should remain on the enquiry so vehicle evidence and commercial details stay attached to the same part.
Within the Breeze fascia, the front bumper grille is an application-moulded exterior piece. The selected part needs the same side, opening arrangement and tab layout as the removed front grille.
The identity chain for HD02004-042 is HONDA Breeze, 2020, front bumper position and OE 71180-T70-H01. Keep HD02004-042 beside Breeze vehicle evidence, keep 71180-T70-H01 beside the removed grille marking, and keep the front location beside the approval photographs.
71180-T70-H01 Front Bumper Grille for HONDA Breeze 2020 is the controlled search entity for this page. In a buyer file, 71180-T70-H01 should lead the Breeze comparison, HD02004-042 should lead the supplier trace, and 2020 HONDA Breeze should lead the vehicle-side confirmation before shipment.
Product Technical Specifications
| Product type | Front Bumper Grille |
|---|---|
| Primary OE reference | 71180-T70-H01 |
| Cross-reference numbers | 71180-T70-H01 |
| Internal item code | HD02004-042 |
| Vehicle brand | HONDA |
| Vehicle model | Breeze |
| Model year | 2020 |
| Installation position | Front bumper area |
| Applicable vehicle | 2020 HONDA Breeze |
Wholesale Procurement for HD02004-042
When asking for 71180-T70-H01, quote catalogue code HD02004-042 and the stated 2020 HONDA Breeze. The supplier can then respond on availability, sample timing, production lead time and packing method.
The listing avoids universal-fit language because bumper grilles can change with market and facelift. Evidence-based confirmation protects both the repair and the supply programme.
Frequently Asked Questions
How should 71180-T70-H01 be checked after delivery?
Verify identity first, then inspect the front bumper grille frame, mesh, tabs, finish and packing-related distortion before installation.
Where is the 71180-T70-H01 grille installed on the Breeze?
The listing places it in the front bumper area of the Breeze. It is not presented as a complete bumper cover or crash reinforcement.
Can this front bumper grille fit every Breeze?
No universal-fit claim is made. Facelift, body style, region and trim can change the grille.
Why is the bumper position important for 71180-T70-H01?
Front, rear, upper, lower and side grille pieces are not interchangeable. This record describes the front bumper location.
Are brackets, emblems and fasteners included with 71180-T70-H01?
Supply scope follows the pictured HD02004-042 component. Confirm loose hardware, badges, covers and accessories with the quotation before ordering.
Request a Product and Fitment Review
Send the complete OE reference 71180-T70-H01, item code HD02004-042, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.
