71173-TLY-H01 Front Left Headlight Trim for HONDA CR-V 2017

71173-TLY-H01 Front Left Headlight Trim Product Overview

The component shown under 71173-TLY-H01 is a front left headlight trim intended for HONDA CR-V 2017. Confirm the left orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for CR-V

During an OE-led review for HD02009-079, compare the complete OE marking with the removed part, check the relationship with the lamp housing, and confirm the decorative finish or painted surface. Before packing the confirmed item, verify the trim package named in the application, verify that the grille design matches the stated application, and compare every locating point and screw opening.

For wholesale selection of 71173-TLY-H01, compare every locating point and screw opening, compare the stamped or moulded reference, and check the vehicle production date where available. For an application-specific order, verify that the grille design matches the stated application, match the locator-slot arrangement, and verify the left or right mounting side.

During left-versus-right inventory selection, compare adjacent bumper and grille sections, review the orientation of the moulded bracket, and confirm the decorative finish or painted surface. During receiving inspection, check nearby body-panel interfaces, match the locator-slot arrangement, and compare the installation direction.

Headlight Trim Design and Replacement Notes

During comparison with the original lamp surround, compare mounting-hole height, inspect the visible face for transport scuffing, and compare reusable clips and hardware. At the workshop preparation stage, compare the profile below the lamp lens, check the transition to the bumper or grille, and confirm decorative surface details.

Before confirming export packing for 71173-TLY-H01, inspect moulded corners before installation, measure the removed part where references are unclear, and check the curvature beside the headlamp. For a repeat wholesale purchase, review the thickness around each mounting boss, inspect the back-side support structure, and compare the centre alignment point.

During an OE-led review for HD02009-079, review the distance between fastening points, inspect both end geometries, and compare reusable clips and hardware. During the physical comparison, review the outer-edge shape, inspect the junction with the fender edge, and review the direction of the locating tabs.

Application-Specific Identification

For application-specific sourcing with 71173-TLY-H01 on the CR-V 2017: match the accessory to the original bumper revision. The HD02009-079 sample for the left side should check the depth of the moulded locator channels. Before installation, protect exposed edges during removal; for a quotation, request corner protection for long moulded parts.

For application-specific sourcing with 71173-TLY-H01 on the CR-V 2017: check the relationship with the lamp housing. The HD02009-079 sample for the left side should compare mounting-hole height. Before installation, trial-fit the component without force; for a quotation, state whether left and right pairs should be bundled.

For application-specific sourcing with 71173-TLY-H01 on the CR-V 2017: check whether the original part is mirrored. The HD02009-079 sample for the left side should inspect the back-side support structure. Before installation, support adjacent body panels evenly; for a quotation, support long trim sections during transit.

Installation Guidance

For HONDA CR-V 2017, photograph the completed installation for order records, confirm an evenly seated fit, and ensure that all removed hardware is accounted for. At the alignment stage, review completed left-to-right alignment, clean the lamp and bumper mounting area, and inspect the surrounding guides.

When preparing a CR-V body repair, align the headlamp edge before fastening, check the adjoining panel gaps, and keep the removed part nearby for comparison. For a no-force trial fit, confirm the correct fitting direction, check the final perimeter around the lamp, and inspect the surrounding guides.

During comparison with the original lamp surround, keep the removed part nearby for comparison, complete a visual check under even lighting, and ensure that all removed hardware is accounted for. While checking adjacent body parts, inspect each screw or clip point, replace distorted clips before final assembly, and support adjacent body panels evenly.

Product Technical Specifications

Wholesale Supply and Packing

For the listed 2017 application, retain the product and carton labels, confirm sample-order requirements, and state the target vehicle application. During receiving inspection, review edge protection inside the carton, confirm whether clips are required separately, and compare the supplied product photographs.

Before the original trim or bracket is discarded, check the ordered mounting side, specify whether the order is for service stock or a project, and confirm pallet requirements for larger quantities. When organizing mixed-OE inventory, provide the destination country, confirm sample-order requirements, and state the destination port or city.

For HONDA CR-V 2017, request protective inner wrapping, confirm replacement-part documentation needs, and confirm the packing method. While reviewing the supplied photographs, request a packing-list breakdown by item code, check the ordered mounting side, and state any outer-carton marking requirements.

Frequently Asked Questions

How should 71173-TLY-H01 be packed for export?

The front left headlight trim should be supported inside the carton, with projecting tabs, narrow ends and visible surfaces protected against abrasion and compression. For CR-V, confirm the destination-market version; inspect the visible face for transport scuffing; protect exposed edges during removal; and provide the destination country before fitting or quotation.

Is a sample order available for 71173-TLY-H01?

Sample and wholesale arrangements can be discussed after the OE reference, vehicle application, required side, quantity and destination are provided. For CR-V, compare every locating point and screw opening; confirm decorative surface details; verify that the headlamp remains centred; and agree the acceptable delivery window before fitting or quotation.

What information should be sent with a 71173-TLY-H01 enquiry?

Send the complete OE number, vehicle details, installation side, photographs of the original part, quantity and delivery destination. For CR-V, compare the stamped or moulded reference; review narrow tips for transport damage; reinstall removed seals in their original positions; and confirm the nominated freight forwarder before fitting or quotation.

Should damaged vehicle-side mounts be checked before fitting 71173-TLY-H01?

Yes. Broken lamp tabs, distorted bumper guides or missing retainers can prevent correct alignment even when the replacement reference is correct. For CR-V, check the vehicle production date where available; inspect the moulded front face and rear ribs; photograph the completed installation for order records; and confirm pallet requirements for larger quantities before fitting or quotation.

Can photographs alone confirm 71173-TLY-H01 compatibility?

Photographs are useful for visual comparison, but the OE reference, model year, side, trim level and mounting geometry should also match. For CR-V, verify that the grille design matches the stated application; compare surrounding grille openings; inspect broken vehicle-side mounts; and confirm the preferred incoterm before fitting or quotation.

Request a Quote

Send the complete OE reference 71173-TLY-H01, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.