71170-T2J-H00 Front Right Fog Light Bezel for HONDA Accord 2014

71170-T2J-H00 Front Right Fog Light Bezel Product Overview

The product shown under 71170-T2J-H00 is a front right fog light bezel intended for HONDA Accord 2014. Check the right orientation, lamp opening, mounting tabs and standard-specification specification against the original component.

Fitment and Application for Accord

Before the removed bezel is discarded, inspect the removed bezel, match the stated trim level, and inspect the lamp aperture size. Before clips or hardware are transferred, match the locating-slot layout, review the bezel orientation, and match the outer contour.

During an OE-led review for HD02008-002, check the vehicle build date, compare the original grille section, and review the bezel orientation. During the physical comparison, confirm the surface finish, check adjacent bumper parts, and match the locating-slot layout.

For wholesale selection of 71170-T2J-H00, compare the installation direction, compare every fixing tab, and check adjacent bumper parts. When checking the bumper opening, verify the mounting side, review the bezel orientation, and match the stated trim level.

Front Right Fog Light Bezel Design and Replacement Notes

When preparing a Accord bumper repair, compare the original edge profile, inspect the moulded face, and compare vent or grille openings. For a no-force trial fit, confirm decorative finish details, review the outer-edge shape, and inspect the frame width.

During comparison with the original lamp surround, check the bumper transition, inspect the back-side structure, and compare vent or grille openings. While checking adjacent body parts, review fastening slots, measure the original length, and confirm decorative finish details.

For replacement in the right front area, measure the original length, compare the surface texture, and check the bezel curvature. Before clips or hardware are transferred, confirm decorative finish details, check the lamp interface, and review narrow bezel ends.

Application-Specific Identification Notes

When the bumper opening is reviewed with 71170-T2J-H00 on the Accord 2014: review market-version differences. The HD02008-002 sample for the right side should measure the original length. For HONDA identification, 71170-T2J-H00 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-002 should request supported carton packing for the HONDA Accord 2014 order.

For application-specific sourcing with 71170-T2J-H00 on the Accord 2014: check the vehicle build date. The HD02008-002 sample for the right side should check the adjoining gap. For HONDA identification, 71170-T2J-H00 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-002 should retain the product label for the HONDA Accord 2014 order.

Before a replacement is packed with 71170-T2J-H00 on the Accord 2014: review the bezel orientation. The HD02008-002 sample for the right side should check the bezel curvature. For HONDA identification, 71170-T2J-H00 also requires technicians to check lamp-to-bezel clearance. A buyer quoting HD02008-002 should request supported carton packing for the HONDA Accord 2014 order.

A vehicle-side comparison starts with 71170-T2J-H00 on the Accord 2014: review facelift styling. The HD02008-002 sample for the right side should check the adjoining gap. For HONDA identification, 71170-T2J-H00 also requires technicians to review separate hardware needs. A buyer quoting HD02008-002 should check the ordered mounting side for the HONDA Accord 2014 order.

Installation Guidance

Before the removed bezel is discarded, check lamp-to-bezel clearance, protect exposed panel edges, and confirm an evenly seated fit. Before the quotation is confirmed, confirm the finished bumper gap, support the bumper cover evenly, and align the lamp opening first.

During an OE-led review for HD02008-002, confirm an evenly seated fit, confirm every locator engages, and verify the lamp remains centred. Before packing the confirmed item, inspect each screw point, trial-fit the bezel without force, and check the final perimeter.

For wholesale selection of 71170-T2J-H00, support the bumper cover evenly, clean the bumper mounting area, and verify the lamp remains centred. For a no-force trial fit, confirm the finished bumper gap, inspect the surrounding guides, and review the completed alignment.

Product Technical Specifications

Wholesale Supply and Packing

When preparing a Accord bumper repair, request protective inner wrapping, inspect receiving condition, and request export quotation terms. Before final installation, confirm the required finish, confirm separate clip requirements, and state the required quantity.

During comparison with the original lamp surround, request supported carton packing, send photographs of the removed part, and request protective inner wrapping. During receiving inspection, confirm the packing method, check the ordered mounting side, and review carton edge protection.

For replacement in the right front area, state the target vehicle, compare the supplied photographs, and request export quotation terms. Before the quotation is confirmed, confirm the delivery schedule, provide the delivery country, and confirm the required finish.

Frequently Asked Questions

What should be inspected when 71170-T2J-H00 arrives?

Check the label, contour, surface finish, lamp aperture, tabs, mounting points and carton condition before installation or disposal of the packaging. For Accord, confirm the vehicle market, inspect the moulded face, review the completed alignment, and compare the supplied photographs before installation or quotation.

Where is 71170-T2J-H00 installed?

The listed front right fog light bezel belongs in the right front bumper area. An opposite-side or different-trim bezel may use another outline and tab arrangement. For Accord, review the bezel orientation, inspect reinforcement ribs, inspect damaged mounting points, and provide the delivery country before installation or quotation.

What details should accompany a 71170-T2J-H00 quotation request?

Send the complete OE reference, vehicle information, mounting side, original-part photographs, quantity and destination so the application can be reviewed. For Accord, confirm the bumper position, inspect the frame width, protect exposed panel edges, and confirm sample requirements before installation or quotation.

Why must the left and right versions of 71170-T2J-H00 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Accord, review market-version differences, inspect the end geometry, support the bumper cover evenly, and state the destination port before installation or quotation.

Is workshop installation recommended for 71170-T2J-H00?

Yes. A workshop can inspect damaged bumper mounts on the Accord, align the lamp opening and avoid forcing a bezel intended for another trim level. For Accord, confirm the vehicle market, inspect the back-side structure, retain the removed bezel for comparison, and protect projecting locator tabs before installation or quotation.

Request a Quote

Send the complete OE reference 71170-T2J-H00, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.