71163-T7M-H01 Front Right Headlight Trim for HONDA Vezel 2019

71163-T7M-H01 Front Right Headlight Trim Product Overview

The component shown under 71163-T7M-H01 is a front right headlight trim intended for HONDA Vezel 2019. Confirm the right orientation, lamp-side contour, mounting geometry and chrome finish against the original vehicle part.

Fitment and Application for Vezel

Before the original trim or bracket is discarded, match the locator-slot arrangement, inspect the original lamp-support geometry, and check whether the original part is mirrored. When organizing mixed-OE inventory, confirm whether the vehicle uses a special appearance package, verify that the grille design matches the stated application, and match the body style and equipment grade.

For HONDA Vezel 2019, check whether the original part is mirrored, compare every locating point and screw opening, and inspect the original lamp-support geometry. While reviewing the supplied photographs, review regional specification differences, match the locator-slot arrangement, and compare the complete OE marking with the removed part.

When preparing a Vezel body repair, verify that the grille design matches the stated application, compare the headlight outline at both ends, and compare adjacent bumper and grille sections. Before final installation, verify the left or right mounting side, confirm whether the vehicle uses a special appearance package, and compare the installation direction.

Headlight Trim Design and Replacement Notes

When comparing 71163-T7M-H01 with the removed component, inspect moulded corners before installation, compare the original edge profile, and review narrow tips for transport damage. When checking the headlamp opening, review the outer-edge shape, compare gloss level with the neighbouring trim, and review fastening slots and clip seats.

For the listed 2019 application, review the distance between fastening points, compare mounting-hole height, and inspect both end geometries. Before the carton is sealed, review the thickness around each mounting boss, compare reusable clips and hardware, and inspect the moulded front face and rear ribs.

Before the original trim or bracket is discarded, compare the centre alignment point, check the transition to the bumper or grille, and review narrow tips for transport damage. Before clips or hardware are transferred, measure the removed part where references are unclear, review nearby cover openings, and review the outer-edge shape.

Application-Specific Identification

When the headlamp outline is reviewed with 71163-T7M-H01 on the Vezel 2019: check the relationship with the lamp housing. The HD02009-107 sample for the right side should inspect reinforcement features behind the part. Before installation, inspect the lamp aim after surrounding parts are refitted; for a quotation, state the destination port or city.

Before workshop installation with 71163-T7M-H01 on the Vezel 2019: check the vehicle production date where available. The HD02009-107 sample for the right side should check mirrored geometry against the required side. Before installation, transfer reusable clips carefully; for a quotation, confirm the required finish.

OE identification begins with 71163-T7M-H01 on the Vezel 2019: compare the headlight outline at both ends. The HD02009-107 sample for the right side should check the adjoining panel gap. Before installation, check that no locator is trapped behind the bumper; for a quotation, protect projecting locator tabs.

Installation Guidance

Before confirming this headlight accessory, check lamp-to-trim clearance, reinstall removed seals in their original positions, and confirm that every locator engages. Before the quotation is confirmed, replace distorted clips before final assembly, inspect broken vehicle-side mounts, and tighten hardware only after alignment.

For a body-shop order covering HONDA, confirm an evenly seated fit, review completed left-to-right alignment, and inspect the surrounding guides. Before packing the confirmed item, confirm a consistent bumper gap, verify that the headlamp remains centred, and tighten hardware only after alignment.

When comparing 71163-T7M-H01 with the removed component, complete a visual check under even lighting, verify that no fastener is cross-threaded, and align the headlamp edge before fastening. For an application-specific order, confirm the correct fitting direction, tighten hardware only after alignment, and inspect the lamp aim after surrounding parts are refitted.

Product Technical Specifications

Wholesale Supply and Packing

When reviewing the visible finish on HD02009-107, protect projecting locator tabs, provide the consignee contact information, and support long trim sections during transit. Before final installation, state whether left and right pairs should be bundled, inspect the carton at receiving, and ask for carton dimensions before freight booking.

Before sourcing this front right headlight trim, review edge protection inside the carton, state the destination port or city, and confirm barcode or private-label requirements. At the workshop preparation stage, confirm pallet requirements for larger quantities, confirm replacement-part documentation needs, and protect projecting locator tabs.

Before confirming this headlight accessory, confirm the packing method, separate painted and unpainted variants, and state the target vehicle application. For a repeat wholesale purchase, state whether left and right pairs should be bundled, confirm the required finish, and request protective inner wrapping.

Frequently Asked Questions

What should be inspected when 71163-T7M-H01 arrives?

Check the item label, contour, finish, locating features, mounting points and carton condition before fitting or discarding the packaging. For Vezel, review regional specification differences; inspect the overall frame width; compare the installed height with the opposite side; and confirm the nominated freight forwarder before fitting or quotation.

Which vehicle application is listed for 71163-T7M-H01?

71163-T7M-H01 is listed for HONDA Vezel 2019. The complete OE reference, production year, body specification and mounting side should agree with the removed component. For Vezel, verify that the grille design matches the stated application; compare surrounding grille openings; avoid bending narrow moulded tabs; and inspect the carton at receiving before fitting or quotation.

How should 71163-T7M-H01 be packed for export?

The front right headlight trim should be supported inside the carton, with projecting tabs, narrow ends and visible surfaces protected against abrasion and compression. For Vezel, review headlamp shape changes between production phases; review the thickness around each mounting boss; inspect the lamp aim after surrounding parts are refitted; and request protective inner wrapping before fitting or quotation.

Is a sample order available for 71163-T7M-H01?

Sample and wholesale arrangements can be discussed after the OE reference, vehicle application, required side, quantity and destination are provided. For Vezel, compare the headlight outline at both ends; check the depth of the moulded locator channels; check the final perimeter around the lamp; and state any outer-carton marking requirements before fitting or quotation.

What information should be sent with a 71163-T7M-H01 enquiry?

Send the complete OE number, vehicle details, installation side, photographs of the original part, quantity and delivery destination. For Vezel, match the locator-slot arrangement; inspect the visible face for transport scuffing; support adjacent body panels evenly; and protect projecting locator tabs before fitting or quotation.

Request a Quote

Send the complete OE reference 71163-T7M-H01, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.