71157-T4D-H71 Front Left Fog Light Bezel for HONDA Jade 2017

71157-T4D-H71 Front Left Fog Light Bezel Product Overview

The product shown under 71157-T4D-H71 is a front left fog light bezel intended for HONDA Jade 2017. Check the left orientation, lamp opening, mounting tabs and high-specification specification against the original component.

Fitment and Application for Jade

For HONDA Jade 2017, verify the mounting side, check the vehicle build date, and confirm the vehicle market. Before packing the confirmed item, inspect the removed bezel, compare the original grille section, and inspect the lamp aperture size.

When preparing a Jade bumper repair, match the outer contour, check the nearby lamp opening, and verify the mounting side. For a no-force trial fit, confirm the model year, confirm the vehicle market, and check adjacent bumper parts.

During comparison with the original lamp surround, match the locating-slot layout, compare the installation direction, and confirm the vehicle market. While checking adjacent body parts, inspect the lamp aperture size, compare the full OE marking, and confirm the model year.

Front Left Fog Light Bezel Design and Replacement Notes

For the listed 2017 application, inspect the frame width, inspect reinforcement ribs, and inspect the moulded face. During receiving inspection, measure the original length, compare the centre alignment, and compare mounting-hole height.

Before the removed bezel is discarded, review locator direction, compare the original edge profile, and inspect the moulded face. Before the quotation is confirmed, compare vent or grille openings, confirm decorative finish details, and review the outer-edge shape.

During an OE-led review for HD02008-079, compare the surface texture, check the lamp interface, and inspect the moulded face. Before packing the confirmed item, check the bumper transition, inspect the back-side structure, and compare vent or grille openings.

Application-Specific Identification Notes

When the bumper opening is reviewed with 71157-T4D-H71 on the Jade 2017: check adjacent bumper parts. The HD02008-079 sample for the left side should check the lamp interface. For HONDA identification, 71157-T4D-H71 also requires technicians to check adjacent panel gaps. A buyer quoting HD02008-079 should request protective inner wrapping for the HONDA Jade 2017 order.

For application-specific sourcing with 71157-T4D-H71 on the Jade 2017: check the nearby lamp opening. The HD02008-079 sample for the left side should check the adjoining gap. For HONDA identification, 71157-T4D-H71 also requires technicians to inspect damaged mounting points. A buyer quoting HD02008-079 should provide the delivery country for the HONDA Jade 2017 order.

Before a replacement is packed with 71157-T4D-H71 on the Jade 2017: review the bezel orientation. The HD02008-079 sample for the left side should compare the original edge profile. For HONDA identification, 71157-T4D-H71 also requires technicians to inspect damaged mounting points. A buyer quoting HD02008-079 should request export quotation terms for the HONDA Jade 2017 order.

A vehicle-side comparison starts with 71157-T4D-H71 on the Jade 2017: review the bezel orientation. The HD02008-079 sample for the left side should check the bumper transition. For HONDA identification, 71157-T4D-H71 also requires technicians to check adjacent panel gaps. A buyer quoting HD02008-079 should include the complete OE reference for the HONDA Jade 2017 order.

Installation Guidance

For HONDA Jade 2017, transfer reusable clips carefully, trial-fit the bezel without force, and clean the bumper mounting area. While reviewing the supplied photographs, inspect the surrounding guides, check the final perimeter, and confirm the fitting direction.

When preparing a Jade bumper repair, inspect each screw point, review separate hardware needs, and review the completed alignment. Before final installation, verify the lamp remains centred, protect nearby painted surfaces, and inspect damaged mounting points.

During comparison with the original lamp surround, review the completed alignment, avoid bending moulded tabs, and clean the bumper mounting area. During receiving inspection, confirm the fitting direction, align the lamp opening first, and confirm an evenly seated fit.

Product Technical Specifications

Wholesale Supply and Packing

For the listed 2017 application, state annual purchasing volume, request export quotation terms, and confirm the packing method. At the workshop preparation stage, state the destination port, confirm the delivery schedule, and request protective inner wrapping.

Before the removed bezel is discarded, state the required quantity, retain the product label, and confirm the packing method. For a repeat wholesale order, request supported carton packing, compare the supplied photographs, and provide the delivery country.

During an OE-led review for HD02008-079, protect projecting locator tabs, include the complete OE reference, and state the required quantity. While reviewing the supplied photographs, state the destination port, state annual purchasing volume, and confirm separate clip requirements.

Frequently Asked Questions

What should be inspected when 71157-T4D-H71 arrives?

Check the label, contour, surface finish, lamp aperture, tabs, mounting points and carton condition before installation or disposal of the packaging. For Jade, confirm the surface finish, inspect the moulded face, protect exposed panel edges, and protect projecting locator tabs before installation or quotation.

Where is 71157-T4D-H71 installed?

The listed front left fog light bezel belongs in the left front bumper area. An opposite-side or different-trim bezel may use another outline and tab arrangement. For Jade, review the bezel orientation, check the bumper transition, verify the lamp remains centred, and confirm separate clip requirements before installation or quotation.

What details should accompany a 71157-T4D-H71 quotation request?

Send the complete OE reference, vehicle information, mounting side, original-part photographs, quantity and destination so the application can be reviewed. For Jade, compare the original grille section, inspect the back-side structure, transfer reusable clips carefully, and confirm the delivery schedule before installation or quotation.

Why must the left and right versions of 71157-T4D-H71 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Jade, check the vehicle build date, compare vent or grille openings, confirm the fitting direction, and request supported carton packing before installation or quotation.

Is workshop installation recommended for 71157-T4D-H71?

Yes. A workshop can inspect damaged bumper mounts on the Jade, align the lamp opening and avoid forcing a bezel intended for another trim level. For Jade, match the outer contour, review fastening slots, confirm the finished bumper gap, and review carton edge protection before installation or quotation.

Request a Quote

Send the complete OE reference 71157-T4D-H71, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.