71157-T4D-H01 Front Left Fog Light Bezel for HONDA Jade 2017

71157-T4D-H01 Front Left Fog Light Bezel Product Overview

This product page presents 71157-T4D-H01 for buyers comparing a front left fog light bezel for HONDA Jade 2017. Check the left orientation, lamp opening, mounting tabs and high-specification specification against the original component.

Fitment and Application for Jade

Before sourcing this front left fog light bezel, confirm the vehicle market, check the vehicle build date, and verify the mounting side. At the workshop preparation stage, compare the installation direction, match the outer contour, and review market-version differences.

Before confirming this fog light bezel, verify the mounting side, inspect the removed bezel, and compare every fixing tab. For a repeat wholesale order, check the nearby lamp opening, confirm the bumper position, and review facelift styling.

For HONDA Jade 2017, match the outer contour, compare the installation direction, and verify the mounting side. While reviewing the supplied photographs, check the vehicle build date, confirm the vehicle market, and inspect the removed bezel.

Front Left Fog Light Bezel Design and Replacement Notes

When separating nearby Jade variants, review narrow bezel ends, check the bumper transition, and compare the centre alignment. During the physical comparison, compare the original edge profile, confirm decorative finish details, and compare mounting-hole height.

When comparing 71157-T4D-H01 with the removed bezel, review nearby cover openings, review the outer-edge shape, and inspect the moulded face. When checking the bumper opening, check the bezel curvature, review fastening slots, and inspect reinforcement ribs.

For the listed 2017 application, inspect the moulded face, measure the original length, and compare the centre alignment. At the workshop preparation stage, compare mounting-hole height, compare the surface texture, and compare vent or grille openings.

Application-Specific Identification Notes

OE selection begins with 71157-T4D-H01 on the Jade 2017: inspect the lamp aperture size. The HD02008-081 sample for the left side should inspect reinforcement ribs. For HONDA identification, 71157-T4D-H01 also requires technicians to confirm the fitting direction. A buyer quoting HD02008-081 should request export quotation terms for the HONDA Jade 2017 order.

For application-specific sourcing with 71157-T4D-H01 on the Jade 2017: inspect the lamp aperture size. The HD02008-081 sample for the left side should check the adjoining gap. For HONDA identification, 71157-T4D-H01 also requires technicians to confirm an evenly seated fit. A buyer quoting HD02008-081 should include the complete OE reference for the HONDA Jade 2017 order.

For an export quotation with 71157-T4D-H01 on the Jade 2017: review the bezel orientation. The HD02008-081 sample for the left side should check the bumper transition. For HONDA identification, 71157-T4D-H01 also requires technicians to support the bumper cover evenly. A buyer quoting HD02008-081 should include the complete OE reference for the HONDA Jade 2017 order.

A vehicle-side comparison starts with 71157-T4D-H01 on the Jade 2017: confirm the model year. The HD02008-081 sample for the left side should review the outer-edge shape. For HONDA identification, 71157-T4D-H01 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-081 should request export quotation terms for the HONDA Jade 2017 order.

Installation Guidance

Before sourcing this front left fog light bezel, confirm the finished bumper gap, verify the lamp remains centred, and clean the bumper mounting area. While checking adjacent body parts, support the bumper cover evenly, protect nearby painted surfaces, and trial-fit the bezel without force.

Before confirming this fog light bezel, align the lamp opening first, confirm the fitting direction, and clean the bumper mounting area. Before clips or hardware are transferred, avoid bending moulded tabs, review the completed alignment, and inspect damaged mounting points.

For HONDA Jade 2017, retain the removed bezel for comparison, check adjacent panel gaps, and align the lamp opening first. During the physical comparison, support the bumper cover evenly, confirm the finished bumper gap, and confirm an evenly seated fit.

Product Technical Specifications

Wholesale Supply and Packing

When separating nearby Jade variants, inspect receiving condition, check the ordered mounting side, and state the required quantity. Before packing the confirmed item, support the bezel during transit, compare the supplied photographs, and request protective inner wrapping.

When comparing 71157-T4D-H01 with the removed bezel, compare the supplied photographs, retain the product label, and confirm the required finish. For a no-force trial fit, request protective inner wrapping, state annual purchasing volume, and state the target vehicle.

For the listed 2017 application, confirm the delivery schedule, request protective inner wrapping, and state the required quantity. While checking adjacent body parts, provide the delivery country, send photographs of the removed part, and include the complete OE reference.

Frequently Asked Questions

What vehicle application is listed for 71157-T4D-H01?

71157-T4D-H01 is presented for HONDA Jade 2017. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Jade, compare every fixing tab, inspect the moulded face, align the lamp opening first, and inspect receiving condition before installation or quotation.

Can photographs alone confirm 71157-T4D-H01 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Jade, review the bezel orientation, measure the original length, confirm an evenly seated fit, and request protective inner wrapping before installation or quotation.

Does trim specification matter for 71157-T4D-H01?

Yes. high-specification can change the opening pattern, finish and locator positions, so compare the removed bezel and bumper before purchase. For Jade, compare the full OE marking, compare the centre alignment, confirm every locator engages, and review carton edge protection before installation or quotation.

How should 71157-T4D-H01 be compared before installation?

Compare the complete OE number, outer contour, lamp opening, locating tabs, screw points and surface finish with the removed component before tightening hardware. For Jade, check the nearby lamp opening, compare mounting-hole height, verify the lamp remains centred, and include the complete OE reference before installation or quotation.

What should be inspected when 71157-T4D-H01 arrives?

Check the label, contour, surface finish, lamp aperture, tabs, mounting points and carton condition before installation or disposal of the packaging. For Jade, confirm the surface finish, compare the surface texture, inspect each screw point, and state annual purchasing volume before installation or quotation.

Request a Quote

Send the complete OE reference 71157-T4D-H01, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.