71148-TLA-A00 Front Left Headlight Mounting Bracket for HONDA CR-V 2017

71148-TLA-A00 Front Left Headlight Mounting Bracket Product Overview

The component shown under 71148-TLA-A00 is a front left headlight mounting bracket intended for HONDA CR-V 2017. Confirm the left orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for CR-V

When preparing a CR-V body repair, check the relationship with the lamp housing, match the locator-slot arrangement, and confirm whether the vehicle uses a special appearance package. Before final installation, retain the original component for a direct comparison, confirm the decorative finish or painted surface, and compare the stamped or moulded reference.

During comparison with the original lamp surround, review the orientation of the moulded bracket, review regional specification differences, and check whether the original part is mirrored. At the workshop preparation stage, compare adjacent bumper and grille sections, match the body style and equipment grade, and verify the trim package named in the application.

Before confirming export packing for 71148-TLA-A00, inspect the original lamp-support geometry, check whether the original part is mirrored, and confirm whether the vehicle uses a special appearance package. For a repeat wholesale purchase, verify that the grille design matches the stated application, match the body style and equipment grade, and retain the original component for a direct comparison.

Headlight Mounting Bracket Design and Replacement Notes

Before the original trim or bracket is discarded, review the thickness around each mounting boss, review narrow tips for transport damage, and check the depth of the moulded locator channels. Before clips or hardware are transferred, measure the removed part where references are unclear, inspect the visible face for transport scuffing, and review nearby cover openings.

For HONDA CR-V 2017, inspect the visible face for transport scuffing, inspect the moulded front face and rear ribs, and compare the original edge profile. At the alignment stage, review the direction of the locating tabs, check the curvature beside the headlamp, and compare the centre alignment point.

When preparing a CR-V body repair, inspect both end geometries, inspect the back-side support structure, and inspect moulded corners before installation. For a no-force trial fit, compare the original edge profile, review narrow tips for transport damage, and review the outer-edge shape.

Application-Specific Identification

OE identification begins with 71148-TLA-A00 on the CR-V 2017: retain the original component for a direct comparison. The HD02009-081 sample for the left side should review fastening slots and clip seats. Before installation, route nearby wiring away from sharp edges; for a quotation, agree the acceptable delivery window.

A vehicle-side comparison starts with 71148-TLA-A00 on the CR-V 2017: match the locator-slot arrangement. The HD02009-081 sample for the left side should compare gloss level with the neighbouring trim. Before installation, check the final perimeter around the lamp; for a quotation, send photographs of the removed component.

Before a replacement is packed with 71148-TLA-A00 on the CR-V 2017: review regional specification differences. The HD02009-081 sample for the left side should inspect the junction with the fender edge. Before installation, review whether separate hardware is needed; for a quotation, identify mixed-OE orders clearly.

Installation Guidance

When comparing 71148-TLA-A00 with the removed component, inspect broken vehicle-side mounts, route nearby wiring away from sharp edges, and keep the removed part nearby for comparison. For an application-specific order, inspect the lamp aim after surrounding parts are refitted, review whether separate hardware is needed, and ensure that all removed hardware is accounted for.

For the listed 2017 application, check lamp-to-trim clearance, review completed left-to-right alignment, and replace distorted clips before final assembly. During receiving inspection, verify that no fastener is cross-threaded, protect painted and chrome surfaces, and avoid bending narrow moulded tabs.

Before the original trim or bracket is discarded, confirm an evenly seated fit, reconfirm the OE reference after the trial fit, and protect exposed edges during removal. When organizing mixed-OE inventory, inspect the lamp aim after surrounding parts are refitted, check lamp-to-trim clearance, and reinstall removed seals in their original positions.

Product Technical Specifications

Wholesale Supply and Packing

Before confirming this headlight accessory, state estimated annual purchasing volume, state the destination port or city, and separate left and right items in the packing list. For a repeat wholesale purchase, request corner protection for long moulded parts, state whether left and right pairs should be bundled, and list every OE reference on the purchase order.

For a body-shop order covering HONDA, separate left and right items in the packing list, separate painted and unpainted variants, and support long trim sections during transit. During the physical comparison, confirm the requested delivery schedule, confirm pallet requirements for larger quantities, and request supported export-carton packing.

When comparing 71148-TLA-A00 with the removed component, state whether left and right pairs should be bundled, inspect the carton at receiving, and ask for carton dimensions before freight booking. When checking the headlamp opening, retain the product and carton labels, confirm the preferred incoterm, and confirm sample-order requirements.

Frequently Asked Questions

Can 71148-TLA-A00 fit every CR-V model year?

No. Styling updates and market versions can change the mounting layout. Use the listed year and OE number as the starting point for confirmation. For CR-V, check nearby body-panel interfaces; check mirrored geometry against the required side; protect painted and chrome surfaces; and confirm replacement-part documentation needs before fitting or quotation.

Is workshop installation recommended for 71148-TLA-A00?

Yes. A body or lighting workshop can inspect damaged mounts on the CR-V, align adjoining panels and avoid forcing a part intended for another version. For CR-V, check whether the original part is mirrored; inspect the moulded front face and rear ribs; reinstall removed seals in their original positions; and check the ordered mounting side before fitting or quotation.

Why must left and right versions of 71148-TLA-A00 be distinguished?

Headlight-area accessories are usually side-specific. Their curves, holes and locator positions should not be assumed interchangeable. For CR-V, compare the complete OE marking with the removed part; inspect reinforcement features behind the part; confirm an evenly seated fit; and list every OE reference on the purchase order before fitting or quotation.

How should 71148-TLA-A00 be checked before installation?

Compare the OE number, overall outline, locating tabs, screw points, surface finish and lamp-side contour with the removed part before hardware is tightened. For CR-V, check the relationship with the lamp housing; inspect the overall frame width; transfer reusable clips carefully; and protect projecting locator tabs before fitting or quotation.

Does the finish specification matter for 71148-TLA-A00?

Yes. Different vehicle grades can change colour, coating, visible texture and locating details, so compare the original part carefully. For CR-V, confirm the decorative finish or painted surface; check the depth of the moulded locator channels; verify that no fastener is cross-threaded; and separate left and right items in the packing list before fitting or quotation.

Request a Quote

Send the complete OE reference 71148-TLA-A00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.