71145-S9A-000 Front Left Headlight Mounting Bracket for HONDA CR-V 2003

71145-S9A-000 Front Left Headlight Mounting Bracket Product Overview

The component shown under 71145-S9A-000 is a front left headlight mounting bracket intended for HONDA CR-V 2003. Confirm the left orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for CR-V

Before confirming export packing for 71145-S9A-000, compare the stamped or moulded reference, check the vehicle production date where available, and verify that the grille design matches the stated application. For a repeat wholesale purchase, match the locator-slot arrangement, verify the left or right mounting side, and verify the trim package named in the application.

During an OE-led review for HD02009-071, compare the complete OE marking with the removed part, confirm the exact model year before placing the order, and match the body style and equipment grade. During the physical comparison, review regional specification differences, verify the left or right mounting side, and retain the original component for a direct comparison.

For wholesale selection of 71145-S9A-000, compare every locating point and screw opening, check nearby body-panel interfaces, and review headlamp shape changes between production phases. When checking the headlamp opening, verify the left or right mounting side, review the orientation of the moulded bracket, and check whether the original part is mirrored.

Headlight Mounting Bracket Design and Replacement Notes

When preparing a CR-V body repair, measure the removed part where references are unclear, check the curvature beside the headlamp, and review the thickness around each mounting boss. For a no-force trial fit, inspect the back-side support structure, compare the centre alignment point, and compare the profile below the lamp lens.

During comparison with the original lamp surround, review the outer-edge shape, inspect the junction with the fender edge, and review the direction of the locating tabs. While checking adjacent body parts, inspect reinforcement features behind the part, review nearby cover openings, and inspect moulded corners before installation.

Before confirming export packing for 71145-S9A-000, compare the profile below the lamp lens, check the adjoining panel gap, and compare gloss level with the neighbouring trim. Before the quotation is confirmed, inspect the back-side support structure, inspect the moulded front face and rear ribs, and compare mounting-hole height.

Application-Specific Identification

At receiving inspection with 71145-S9A-000 on the CR-V 2003: check nearby body-panel interfaces. The HD02009-071 sample for the left side should compare the visible texture and finish. Before installation, reinstall removed seals in their original positions; for a quotation, request a packing-list breakdown by item code.

For application-specific sourcing with 71145-S9A-000 on the CR-V 2003: compare the headlight outline at both ends. The HD02009-071 sample for the left side should review the thickness around each mounting boss. Before installation, inspect each screw or clip point; for a quotation, separate painted and unpainted variants.

At receiving inspection with 71145-S9A-000 on the CR-V 2003: confirm the exact model year before placing the order. The HD02009-071 sample for the left side should review nearby cover openings. Before installation, inspect broken vehicle-side mounts; for a quotation, retain the product and carton labels.

Installation Guidance

Before the original trim or bracket is discarded, clean the lamp and bumper mounting area, trial-fit the component without force, and transfer reusable clips carefully. When organizing mixed-OE inventory, avoid bending narrow moulded tabs, inspect each screw or clip point, and review whether separate hardware is needed.

For HONDA CR-V 2003, transfer reusable clips carefully, inspect the surrounding guides, and verify that no fastener is cross-threaded. While reviewing the supplied photographs, confirm that every locator engages, verify that the headlamp remains centred, and reconfirm the OE reference after the trial fit.

When preparing a CR-V body repair, inspect each screw or clip point, check the finish for tool marks before delivery, and confirm an evenly seated fit. Before final installation, support adjacent body panels evenly, tighten hardware only after alignment, and transfer reusable clips carefully.

Product Technical Specifications

Wholesale Supply and Packing

When comparing 71145-S9A-000 with the removed component, check the ordered mounting side, specify whether the order is for service stock or a project, and confirm pallet requirements for larger quantities. When checking the headlamp opening, provide the destination country, confirm sample-order requirements, and state the destination port or city.

For the listed 2003 application, request protective inner wrapping, confirm replacement-part documentation needs, and confirm the packing method. Before the carton is sealed, request a packing-list breakdown by item code, check the ordered mounting side, and state any outer-carton marking requirements.

Before the original trim or bracket is discarded, provide the consignee contact information, confirm the preferred incoterm, and confirm pallet requirements for larger quantities. Before clips or hardware are transferred, confirm the nominated freight forwarder, agree the acceptable delivery window, and provide the destination country.

Frequently Asked Questions

Is a sample order available for 71145-S9A-000?

Sample and wholesale arrangements can be discussed after the OE reference, vehicle application, required side, quantity and destination are provided. For CR-V, check whether the original part is mirrored; inspect the visible face for transport scuffing; route nearby wiring away from sharp edges; and state the required order quantity before fitting or quotation.

What information should be sent with a 71145-S9A-000 enquiry?

Send the complete OE number, vehicle details, installation side, photographs of the original part, quantity and delivery destination. For CR-V, verify the left or right mounting side; confirm decorative surface details; protect exposed edges during removal; and provide the consignee contact information before fitting or quotation.

Should damaged vehicle-side mounts be checked before fitting 71145-S9A-000?

Yes. Broken lamp tabs, distorted bumper guides or missing retainers can prevent correct alignment even when the replacement reference is correct. For CR-V, check nearby body-panel interfaces; review narrow tips for transport damage; protect painted and chrome surfaces; and confirm whether clips are required separately before fitting or quotation.

Can photographs alone confirm 71145-S9A-000 compatibility?

Photographs are useful for visual comparison, but the OE reference, model year, side, trim level and mounting geometry should also match. For CR-V, match the accessory to the original bumper revision; inspect the moulded front face and rear ribs; check that no locator is trapped behind the bumper; and confirm replacement-part documentation needs before fitting or quotation.

Can 71145-S9A-000 fit every CR-V model year?

No. Styling updates and market versions can change the mounting layout. Use the listed year and OE number as the starting point for confirmation. For CR-V, confirm the front installation position; compare surrounding grille openings; review whether separate hardware is needed; and confirm barcode or private-label requirements before fitting or quotation.

Request a Quote

Send the complete OE reference 71145-S9A-000, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.