71143-TLA-A00 Front Right Headlight Mounting Bracket for HONDA CR-V 2017

71143-TLA-A00 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71143-TLA-A00 is a front right headlight mounting bracket intended for HONDA CR-V 2017. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for CR-V

Before confirming this headlight accessory, verify the trim package named in the application, review facelift and pre-facelift styling, and match the accessory to the original bumper revision. Before the quotation is confirmed, confirm the decorative finish or painted surface, match the body style and equipment grade, and inspect the original lamp-support geometry.

For a body-shop order covering HONDA, check the lamp manufacturer where multiple units were fitted, verify that the grille design matches the stated application, and compare the complete OE marking with the removed part. Before packing the confirmed item, confirm the exact model year before placing the order, match the body style and equipment grade, and review regional specification differences.

When comparing 71143-TLA-A00 with the removed component, verify the left or right mounting side, review the orientation of the moulded bracket, and check whether the original part is mirrored. For an application-specific order, match the body style and equipment grade, check the vehicle production date where available, and compare the headlight outline at both ends.

Headlight Mounting Bracket Design and Replacement Notes

When reviewing the visible finish on HD02009-082, check the transition to the bumper or grille, compare gloss level with the neighbouring trim, and inspect the overall frame width. Before final installation, compare the visible texture and finish, review the distance between fastening points, and review the outer-edge shape.

Before sourcing this front right headlight mounting bracket, measure the removed part where references are unclear, confirm decorative surface details, and check the depth of the moulded locator channels. At the workshop preparation stage, check the curvature beside the headlamp, review narrow tips for transport damage, and compare mounting-hole height.

Before confirming this headlight accessory, review the outer-edge shape, inspect both end geometries, and check mirrored geometry against the required side. For a repeat wholesale purchase, compare the visible texture and finish, compare the profile below the lamp lens, and check the adjoining panel gap.

Application-Specific Identification

When the headlamp outline is reviewed with 71143-TLA-A00 on the CR-V 2017: verify the trim package named in the application. The HD02009-082 sample for the right side should inspect the junction with the fender edge. Before installation, confirm the correct fitting direction; for a quotation, confirm barcode or private-label requirements.

Before workshop installation with 71143-TLA-A00 on the CR-V 2017: retain the original component for a direct comparison. The HD02009-082 sample for the right side should review the outer-edge shape. Before installation, inspect broken vehicle-side mounts; for a quotation, request moisture protection for sea freight.

OE identification begins with 71143-TLA-A00 on the CR-V 2017: compare the stamped or moulded reference. The HD02009-082 sample for the right side should review the outer-edge shape. Before installation, transfer reusable clips carefully; for a quotation, compare the supplied product photographs.

Installation Guidance

For replacement in the right front headlamp area, inspect the surrounding guides, tighten hardware only after alignment, and replace distorted clips before final assembly. Before clips or hardware are transferred, reinstall removed seals in their original positions, inspect the lamp aim after surrounding parts are refitted, and reconfirm the OE reference after the trial fit.

When separating nearby CR-V variants, replace distorted clips before final assembly, support adjacent body panels evenly, and protect exposed edges during removal. At the alignment stage, check that no locator is trapped behind the bumper, trial-fit the component without force, and check the final perimeter around the lamp.

When reviewing the visible finish on HD02009-082, inspect the lamp aim after surrounding parts are refitted, review whether separate hardware is needed, and ensure that all removed hardware is accounted for. For a no-force trial fit, confirm a consistent bumper gap, align the headlamp edge before fastening, and replace distorted clips before final assembly.

Product Technical Specifications

Wholesale Supply and Packing

For wholesale selection of 71143-TLA-A00, confirm the preferred incoterm, agree the acceptable delivery window, and support long trim sections during transit. For an application-specific order, state estimated annual purchasing volume, request corner protection for long moulded parts, and state any outer-carton marking requirements.

During left-versus-right inventory selection, confirm the nominated freight forwarder, compare the supplied product photographs, and confirm pallet requirements for larger quantities. During receiving inspection, state the target vehicle application, confirm the preferred incoterm, and inspect the carton at receiving.

For replacement in the right front headlamp area, provide the destination country, confirm the required finish, and support long trim sections during transit. When organizing mixed-OE inventory, confirm sample-order requirements, confirm whether clips are required separately, and state estimated annual purchasing volume.

Frequently Asked Questions

Which side uses 71143-TLA-A00?

This front right headlight mounting bracket is catalogued for the right front headlamp area. Opposite-side parts normally use mirrored geometry and a different reference. For CR-V, review regional specification differences; check the curvature beside the headlamp; protect exposed edges during removal; and identify mixed-OE orders clearly before fitting or quotation.

What should be inspected when 71143-TLA-A00 arrives?

Check the item label, contour, finish, locating features, mounting points and carton condition before fitting or discarding the packaging. For CR-V, verify that the grille design matches the stated application; inspect the visible face for transport scuffing; verify that the headlamp remains centred; and state estimated annual purchasing volume before fitting or quotation.

Which vehicle application is listed for 71143-TLA-A00?

71143-TLA-A00 is listed for HONDA CR-V 2017. The complete OE reference, production year, body specification and mounting side should agree with the removed component. For CR-V, review headlamp shape changes between production phases; inspect the junction with the fender edge; reinstall removed seals in their original positions; and retain the product and carton labels before fitting or quotation.

How should 71143-TLA-A00 be packed for export?

The front right headlight mounting bracket should be supported inside the carton, with projecting tabs, narrow ends and visible surfaces protected against abrasion and compression. For CR-V, compare the headlight outline at both ends; check mirrored geometry against the required side; photograph the completed installation for order records; and send photographs of the removed component before fitting or quotation.

Is a sample order available for 71143-TLA-A00?

Sample and wholesale arrangements can be discussed after the OE reference, vehicle application, required side, quantity and destination are provided. For CR-V, match the locator-slot arrangement; inspect the overall frame width; inspect broken vehicle-side mounts; and confirm the nominated freight forwarder before fitting or quotation.

Request a Quote

Send the complete OE reference 71143-TLA-A00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.