71141-3K0-H01 Front Right Fog Light Bezel for HONDA Integra 2022

71141-3K0-H01 Front Right Fog Light Bezel Product Overview

This listing covers 71141-3K0-H01, a front right fog light bezel associated with HONDA Integra 2022. Check the right orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Integra

Before the removed bezel is discarded, review the bezel orientation, match the outer contour, and check the nearby lamp opening. Before clips or hardware are transferred, verify the mounting side, confirm the model year, and confirm the vehicle market.

During an OE-led review for HD02008-073, inspect the lamp aperture size, compare the full OE marking, and confirm the model year. During the physical comparison, match the stated trim level, review market-version differences, and verify the mounting side.

For wholesale selection of 71141-3K0-H01, inspect the removed bezel, confirm the surface finish, and review market-version differences. When checking the bumper opening, compare the original grille section, confirm the model year, and match the outer contour.

Front Right Fog Light Bezel Design and Replacement Notes

When preparing a Integra bumper repair, check the lamp interface, inspect the back-side structure, and measure the original length. For a no-force trial fit, compare transferred hardware, check the adjoining gap, and review narrow bezel ends.

During comparison with the original lamp surround, compare vent or grille openings, review fastening slots, and measure the original length. While checking adjacent body parts, confirm decorative finish details, inspect the end geometry, and compare transferred hardware.

For replacement in the right front area, inspect the end geometry, inspect the moulded face, and compare mounting-hole height. Before clips or hardware are transferred, compare transferred hardware, check the bumper transition, and review locator direction.

Application-Specific Identification Notes

For application-specific sourcing with 71141-3K0-H01 on the Integra 2022: check adjacent bumper parts. The HD02008-073 sample for the right side should check the bezel curvature. For HONDA identification, 71141-3K0-H01 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-073 should confirm separate clip requirements for the HONDA Integra 2022 order.

For application-specific sourcing with 71141-3K0-H01 on the Integra 2022: compare the original grille section. The HD02008-073 sample for the right side should inspect the moulded face. For HONDA identification, 71141-3K0-H01 also requires technicians to review the completed alignment. A buyer quoting HD02008-073 should state annual purchasing volume for the HONDA Integra 2022 order.

For application-specific sourcing with 71141-3K0-H01 on the Integra 2022: review market-version differences. The HD02008-073 sample for the right side should measure the original length. For HONDA identification, 71141-3K0-H01 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-073 should state the target vehicle for the HONDA Integra 2022 order.

For application-specific sourcing with 71141-3K0-H01 on the Integra 2022: confirm the bumper position. The HD02008-073 sample for the right side should confirm decorative finish details. For HONDA identification, 71141-3K0-H01 also requires technicians to clean the bumper mounting area. A buyer quoting HD02008-073 should confirm the delivery schedule for the HONDA Integra 2022 order.

Installation Guidance

Before the removed bezel is discarded, trial-fit the bezel without force, transfer reusable clips carefully, and avoid bending moulded tabs. Before the quotation is confirmed, inspect each screw point, review separate hardware needs, and review the completed alignment.

During an OE-led review for HD02008-073, avoid bending moulded tabs, clean the bumper mounting area, and confirm the fitting direction. Before packing the confirmed item, align the lamp opening first, confirm an evenly seated fit, and confirm every locator engages.

For wholesale selection of 71141-3K0-H01, review separate hardware needs, protect exposed panel edges, and confirm the fitting direction. For a no-force trial fit, inspect each screw point, check lamp-to-bezel clearance, and retain the removed bezel for comparison.

Product Technical Specifications

Wholesale Supply and Packing

When preparing a Integra bumper repair, confirm separate clip requirements, state the required quantity, and retain the product label. Before final installation, confirm the packing method, request supported carton packing, and compare the supplied photographs.

During comparison with the original lamp surround, state the destination port, state annual purchasing volume, and confirm separate clip requirements. During receiving inspection, confirm sample requirements, support the bezel during transit, and confirm the required finish.

For replacement in the right front area, include the complete OE reference, protect projecting locator tabs, and retain the product label. Before the quotation is confirmed, review carton edge protection, check the ordered mounting side, and confirm the packing method.

Frequently Asked Questions

Where is 71141-3K0-H01 installed?

The listed front right fog light bezel belongs in the right front bumper area. An opposite-side or different-trim bezel may use another outline and tab arrangement. For Integra, inspect the lamp aperture size, check the adjoining gap, inspect damaged mounting points, and request protective inner wrapping before installation or quotation.

What details should accompany a 71141-3K0-H01 quotation request?

Send the complete OE reference, vehicle information, mounting side, original-part photographs, quantity and destination so the application can be reviewed. For Integra, review market-version differences, review the outer-edge shape, confirm the fitting direction, and support the bezel during transit before installation or quotation.

Why must the left and right versions of 71141-3K0-H01 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Integra, check the nearby lamp opening, inspect the end geometry, verify the lamp remains centred, and check the ordered mounting side before installation or quotation.

Is workshop installation recommended for 71141-3K0-H01?

Yes. A workshop can inspect damaged bumper mounts on the Integra, align the lamp opening and avoid forcing a bezel intended for another trim level. For Integra, check the vehicle build date, measure the original length, check adjacent panel gaps, and provide the delivery country before installation or quotation.

Are mounting clips supplied with 71141-3K0-H01?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Integra, check adjacent bumper parts, compare vent or grille openings, review separate hardware needs, and retain the product label before installation or quotation.

Request a Quote

Send the complete OE reference 71141-3K0-H01, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.