71140-TW1-H01 Front Right Headlight Mounting Bracket for HONDA Crosstour 2014

71140-TW1-H01 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-TW1-H01 is a front right headlight mounting bracket intended for HONDA Crosstour 2014. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Crosstour

For a body-shop order covering HONDA, match the outer profile around the headlamp, compare the installation direction, and review headlamp shape changes between production phases. During the physical comparison, match the body style and equipment grade, review facelift and pre-facelift styling, and match the locator-slot arrangement.

When comparing 71140-TW1-H01 with the removed component, match the locator-slot arrangement, verify the left or right mounting side, and verify the trim package named in the application. When checking the headlamp opening, review facelift and pre-facelift styling, match the accessory to the original bumper revision, and confirm the decorative finish or painted surface.

For the listed 2014 application, check whether the original part is mirrored, compare the stamped or moulded reference, and review headlamp shape changes between production phases. Before the carton is sealed, confirm whether the vehicle uses a special appearance package, match the accessory to the original bumper revision, and check the lamp manufacturer where multiple units were fitted.

Headlight Mounting Bracket Design and Replacement Notes

Before sourcing this front right headlight mounting bracket, review nearby cover openings, review the distance between fastening points, and check the adjoining panel gap. While checking adjacent body parts, review the thickness around each mounting boss, review fastening slots and clip seats, and review the outer-edge shape.

Before confirming this headlight accessory, check mirrored geometry against the required side, compare reusable clips and hardware, and review the direction of the locating tabs. Before the quotation is confirmed, inspect moulded corners before installation, measure the removed part where references are unclear, and check the curvature beside the headlamp.

For a body-shop order covering HONDA, compare gloss level with the neighbouring trim, compare the centre alignment point, and check the adjoining panel gap. Before packing the confirmed item, inspect the overall frame width, compare the profile below the lamp lens, and compare the original edge profile.

Application-Specific Identification

For application-specific sourcing with 71140-TW1-H01 on the Crosstour 2014: confirm whether the vehicle uses a special appearance package. The HD02009-026 sample for the right side should inspect the visible face for transport scuffing. Before installation, review whether separate hardware is needed; for a quotation, agree the acceptable delivery window.

For application-specific sourcing with 71140-TW1-H01 on the Crosstour 2014: review headlamp shape changes between production phases. The HD02009-026 sample for the right side should check the adjoining panel gap. Before installation, support adjacent body panels evenly; for a quotation, send photographs of the removed component.

For application-specific sourcing with 71140-TW1-H01 on the Crosstour 2014: verify that the grille design matches the stated application. The HD02009-026 sample for the right side should inspect the visible face for transport scuffing. Before installation, check the finish for tool marks before delivery; for a quotation, identify mixed-OE orders clearly.

Installation Guidance

When separating nearby Crosstour variants, protect exposed edges during removal, check the finish for tool marks before delivery, and review whether separate hardware is needed. While reviewing the supplied photographs, reconfirm the OE reference after the trial fit, check the final perimeter around the lamp, and photograph the completed installation for order records.

When reviewing the visible finish on HD02009-026, confirm a consistent bumper gap, complete a visual check under even lighting, and route nearby wiring away from sharp edges. Before final installation, confirm that the hood and fender clearances remain even, verify that no fastener is cross-threaded, and photograph the completed installation for order records.

Before sourcing this front right headlight mounting bracket, route nearby wiring away from sharp edges, protect painted and chrome surfaces, and review whether separate hardware is needed. At the workshop preparation stage, reinstall removed seals in their original positions, align the headlamp edge before fastening, and confirm an evenly seated fit.

Product Technical Specifications

Wholesale Supply and Packing

During left-versus-right inventory selection, state estimated annual purchasing volume, request the applicable export terms, and confirm the packing method. Before the carton is sealed, state the destination port or city, confirm the requested delivery schedule, and request protective inner wrapping.

For replacement in the right front headlamp area, separate left and right items in the packing list, list every OE reference on the purchase order, and confirm replacement-part documentation needs. Before clips or hardware are transferred, inspect the carton at receiving, request the applicable export terms, and confirm barcode or private-label requirements.

When separating nearby Crosstour variants, state whether left and right pairs should be bundled, protect projecting locator tabs, and request corner protection for long moulded parts. At the alignment stage, include the complete OE reference, separate left and right items in the packing list, and state the required order quantity.

Frequently Asked Questions

Does the finish specification matter for 71140-TW1-H01?

Yes. Different vehicle grades can change colour, coating, visible texture and locating details, so compare the original part carefully. For Crosstour, check the lamp manufacturer where multiple units were fitted; check the adjoining panel gap; check the adjoining panel gaps; and list every OE reference on the purchase order before fitting or quotation.

Does 71140-TW1-H01 include a complete headlamp assembly?

No. This page covers the pictured front right headlight mounting bracket. Lamps, bulbs, wiring, modules and separate fasteners are not included unless visibly shown in the product photographs. For Crosstour, match the locator-slot arrangement; review the outer-edge shape; tighten hardware only after alignment; and confirm the preferred incoterm before fitting or quotation.

Are clips and screws supplied with 71140-TW1-H01?

The supply scope follows the photographs. Reusable clips, screws, retainers or separate brackets should be confirmed before the order is finalized. For Crosstour, retain the original component for a direct comparison; check the depth of the moulded locator channels; clean the lamp and bumper mounting area; and ask for carton dimensions before freight booking before fitting or quotation.

Which side uses 71140-TW1-H01?

This front right headlight mounting bracket is catalogued for the right front headlamp area. Opposite-side parts normally use mirrored geometry and a different reference. For Crosstour, compare the stamped or moulded reference; compare the centre alignment point; review whether separate hardware is needed; and state whether left and right pairs should be bundled before fitting or quotation.

What should be inspected when 71140-TW1-H01 arrives?

Check the item label, contour, finish, locating features, mounting points and carton condition before fitting or discarding the packaging. For Crosstour, compare adjacent bumper and grille sections; compare reusable clips and hardware; use hand pressure only during the initial engagement; and provide the consignee contact information before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-TW1-H01, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.