71140-TMO-T00 Front Right Headlight Mounting Bracket for HONDA City 2009

71140-TMO-T00 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-TMO-T00 is a front right headlight mounting bracket intended for HONDA City 2009. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for City

Before confirming this headlight accessory, confirm whether the vehicle uses a special appearance package, review the orientation of the moulded bracket, and confirm the exact model year before placing the order. Before the quotation is confirmed, confirm the destination-market version, compare every locating point and screw opening, and compare the stamped or moulded reference.

For a body-shop order covering HONDA, match the body style and equipment grade, review regional specification differences, and verify the left or right mounting side. Before packing the confirmed item, retain the original component for a direct comparison, compare every locating point and screw opening, and check the relationship with the lamp housing.

When comparing 71140-TMO-T00 with the removed component, confirm the front installation position, compare the installation direction, and match the accessory to the original bumper revision. For an application-specific order, compare every locating point and screw opening, check nearby body-panel interfaces, and review headlamp shape changes between production phases.

Headlight Mounting Bracket Design and Replacement Notes

When reviewing the visible finish on HD02009-059, review the outer-edge shape, inspect reinforcement features behind the part, and inspect the visible face for transport scuffing. Before final installation, confirm decorative surface details, review narrow tips for transport damage, and inspect the moulded front face and rear ribs.

Before sourcing this front right headlight mounting bracket, compare the profile below the lamp lens, compare the original edge profile, and compare the visible texture and finish. At the workshop preparation stage, check the interface with the lamp housing, check mirrored geometry against the required side, and review the distance between fastening points.

Before confirming this headlight accessory, inspect the moulded front face and rear ribs, compare mounting-hole height, and check the curvature beside the headlamp. For a repeat wholesale purchase, confirm decorative surface details, review fastening slots and clip seats, and inspect moulded corners before installation.

Application-Specific Identification

Before a replacement is packed with 71140-TMO-T00 on the City 2009: review facelift and pre-facelift styling. The HD02009-059 sample for the right side should compare surrounding grille openings. Before installation, transfer reusable clips carefully; for a quotation, support long trim sections during transit.

For side-specific inventory control with 71140-TMO-T00 on the City 2009: compare every locating point and screw opening. The HD02009-059 sample for the right side should review the distance between fastening points. Before installation, inspect the surrounding guides; for a quotation, check sample approval before mass shipment.

For an export quotation with 71140-TMO-T00 on the City 2009: confirm the front installation position. The HD02009-059 sample for the right side should measure the removed part where references are unclear. Before installation, align the headlamp edge before fastening; for a quotation, confirm the required finish.

Installation Guidance

For replacement in the right front headlamp area, review completed left-to-right alignment, verify that the headlamp remains centred, and compare the installed height with the opposite side. Before clips or hardware are transferred, check that no locator is trapped behind the bumper, use hand pressure only during the initial engagement, and check the finish for tool marks before delivery.

When separating nearby City variants, compare the installed height with the opposite side, clean the lamp and bumper mounting area, and confirm the correct fitting direction. At the alignment stage, route nearby wiring away from sharp edges, protect painted and chrome surfaces, and review whether separate hardware is needed.

When reviewing the visible finish on HD02009-059, use hand pressure only during the initial engagement, protect exposed edges during removal, and photograph the completed installation for order records. For a no-force trial fit, inspect the surrounding guides, trial-fit the component without force, and compare the installed height with the opposite side.

Product Technical Specifications

Wholesale Supply and Packing

For wholesale selection of 71140-TMO-T00, state the required order quantity, retain the product and carton labels, and confirm the packing method. For an application-specific order, provide the consignee contact information, confirm the nominated freight forwarder, and confirm the required finish.

During left-versus-right inventory selection, protect projecting locator tabs, request corner protection for long moulded parts, and include the complete OE reference. During receiving inspection, separate left and right items in the packing list, state the required order quantity, and state the destination port or city.

For replacement in the right front headlamp area, review edge protection inside the carton, check the ordered mounting side, and confirm the packing method. When organizing mixed-OE inventory, request protective inner wrapping, specify whether the order is for service stock or a project, and provide the consignee contact information.

Frequently Asked Questions

Why must left and right versions of 71140-TMO-T00 be distinguished?

Headlight-area accessories are usually side-specific. Their curves, holes and locator positions should not be assumed interchangeable. For City, review regional specification differences; check the interface with the lamp housing; replace distorted clips before final assembly; and include the complete OE reference before fitting or quotation.

How should 71140-TMO-T00 be checked before installation?

Compare the OE number, overall outline, locating tabs, screw points, surface finish and lamp-side contour with the removed part before hardware is tightened. For City, verify that the grille design matches the stated application; review the distance between fastening points; use hand pressure only during the initial engagement; and separate left and right items in the packing list before fitting or quotation.

Does the finish specification matter for 71140-TMO-T00?

Yes. Different vehicle grades can change colour, coating, visible texture and locating details, so compare the original part carefully. For City, review headlamp shape changes between production phases; compare reusable clips and hardware; photograph the completed installation for order records; and state the required order quantity before fitting or quotation.

Does 71140-TMO-T00 include a complete headlamp assembly?

No. This page covers the pictured front right headlight mounting bracket. Lamps, bulbs, wiring, modules and separate fasteners are not included unless visibly shown in the product photographs. For City, compare the headlight outline at both ends; inspect the junction with the fender edge; trial-fit the component without force; and state the destination port or city before fitting or quotation.

Are clips and screws supplied with 71140-TMO-T00?

The supply scope follows the photographs. Reusable clips, screws, retainers or separate brackets should be confirmed before the order is finalized. For City, match the locator-slot arrangement; inspect reinforcement features behind the part; confirm that every locator engages; and check sample approval before mass shipment before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-TMO-T00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.