71140-THA-A01 Front Right Headlight Mounting Bracket for HONDA Avancier 2017

71140-THA-A01 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-THA-A01 is a front right headlight mounting bracket intended for HONDA Avancier 2017. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Avancier

Before sourcing this front right headlight mounting bracket, check the vehicle production date where available, compare adjacent bumper and grille sections, and review the orientation of the moulded bracket. At the workshop preparation stage, confirm the decorative finish or painted surface, check nearby body-panel interfaces, and match the locator-slot arrangement.

Before confirming this headlight accessory, compare the installation direction, match the accessory to the original bumper revision, and compare every locating point and screw opening. For a repeat wholesale purchase, check nearby body-panel interfaces, review headlamp shape changes between production phases, and verify the left or right mounting side.

For a body-shop order covering HONDA, compare the stamped or moulded reference, review the orientation of the moulded bracket, and review regional specification differences. During the physical comparison, check whether the original part is mirrored, compare adjacent bumper and grille sections, and match the body style and equipment grade.

Headlight Mounting Bracket Design and Replacement Notes

When separating nearby Avancier variants, check mirrored geometry against the required side, review the distance between fastening points, and inspect both end geometries. At the alignment stage, compare reusable clips and hardware, review the outer-edge shape, and inspect the junction with the fender edge.

When reviewing the visible finish on HD02009-100, compare gloss level with the neighbouring trim, inspect the back-side support structure, and inspect the moulded front face and rear ribs. For a no-force trial fit, compare mounting-hole height, check the curvature beside the headlamp, and confirm decorative surface details.

Before sourcing this front right headlight mounting bracket, check the curvature beside the headlamp, compare the centre alignment point, and inspect both end geometries. While checking adjacent body parts, review fastening slots and clip seats, check the transition to the bumper or grille, and compare the visible texture and finish.

Application-Specific Identification

A vehicle-side comparison starts with 71140-THA-A01 on the Avancier 2017: check whether the original part is mirrored. The HD02009-100 sample for the right side should compare reusable clips and hardware. Before installation, reconfirm the OE reference after the trial fit; for a quotation, state estimated annual purchasing volume.

A trim-level comparison requires with 71140-THA-A01 on the Avancier 2017: compare the installation direction. The HD02009-100 sample for the right side should review nearby cover openings. Before installation, clean the lamp and bumper mounting area; for a quotation, confirm pallet requirements for larger quantities.

For side-specific inventory control with 71140-THA-A01 on the Avancier 2017: compare the installation direction. The HD02009-100 sample for the right side should check the depth of the moulded locator channels. Before installation, inspect each screw or clip point; for a quotation, confirm barcode or private-label requirements.

Installation Guidance

During left-versus-right inventory selection, tighten hardware only after alignment, photograph the completed installation for order records, and check lamp-to-trim clearance. During receiving inspection, compare the installed height with the opposite side, clean the lamp and bumper mounting area, and confirm the correct fitting direction.

For replacement in the right front headlamp area, reinstall removed seals in their original positions, inspect each screw or clip point, and check the finish for tool marks before delivery. When organizing mixed-OE inventory, confirm an evenly seated fit, support adjacent body panels evenly, and tighten hardware only after alignment.

When separating nearby Avancier variants, reconfirm the OE reference after the trial fit, align the headlamp edge before fastening, and check lamp-to-trim clearance. While reviewing the supplied photographs, review completed left-to-right alignment, replace distorted clips before final assembly, and verify that no fastener is cross-threaded.

Product Technical Specifications

Wholesale Supply and Packing

During an OE-led review for HD02009-100, request corner protection for long moulded parts, include the complete OE reference, and separate left and right items in the packing list. During the physical comparison, state the required order quantity, state the destination port or city, and check sample approval before mass shipment.

For wholesale selection of 71140-THA-A01, list every OE reference on the purchase order, state any outer-carton marking requirements, and request a packing-list breakdown by item code. When checking the headlamp opening, confirm replacement-part documentation needs, send photographs of the removed component, and request supported export-carton packing.

During left-versus-right inventory selection, request a packing-list breakdown by item code, retain the product and carton labels, and separate left and right items in the packing list. Before the carton is sealed, separate painted and unpainted variants, support long trim sections during transit, and confirm the requested delivery schedule.

Frequently Asked Questions

How should 71140-THA-A01 be checked before installation?

Compare the OE number, overall outline, locating tabs, screw points, surface finish and lamp-side contour with the removed part before hardware is tightened. For Avancier, confirm the decorative finish or painted surface; measure the removed part where references are unclear; clean the lamp and bumper mounting area; and confirm the required finish before fitting or quotation.

Does the finish specification matter for 71140-THA-A01?

Yes. Different vehicle grades can change colour, coating, visible texture and locating details, so compare the original part carefully. For Avancier, confirm the front installation position; review the thickness around each mounting boss; complete a visual check under even lighting; and state any outer-carton marking requirements before fitting or quotation.

Does 71140-THA-A01 include a complete headlamp assembly?

No. This page covers the pictured front right headlight mounting bracket. Lamps, bulbs, wiring, modules and separate fasteners are not included unless visibly shown in the product photographs. For Avancier, match the body style and equipment grade; compare the centre alignment point; avoid bending narrow moulded tabs; and identify mixed-OE orders clearly before fitting or quotation.

Are clips and screws supplied with 71140-THA-A01?

The supply scope follows the photographs. Reusable clips, screws, retainers or separate brackets should be confirmed before the order is finalized. For Avancier, confirm whether the vehicle uses a special appearance package; check the interface with the lamp housing; verify that no fastener is cross-threaded; and review edge protection inside the carton before fitting or quotation.

Which side uses 71140-THA-A01?

This front right headlight mounting bracket is catalogued for the right front headlamp area. Opposite-side parts normally use mirrored geometry and a different reference. For Avancier, inspect the original lamp-support geometry; inspect the junction with the fender edge; review completed left-to-right alignment; and provide the destination country before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-THA-A01, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.