71140-TF0-000 Front Right Headlight Mounting Bracket for HONDA Fit 2009

71140-TF0-000 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-TF0-000 is a front right headlight mounting bracket intended for HONDA Fit 2009. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Fit

Before the original trim or bracket is discarded, verify that the grille design matches the stated application, match the body style and equipment grade, and retain the original component for a direct comparison. When organizing mixed-OE inventory, confirm the front installation position, check the vehicle production date where available, and confirm the decorative finish or painted surface.

For HONDA Fit 2009, retain the original component for a direct comparison, confirm the destination-market version, and match the body style and equipment grade. While reviewing the supplied photographs, check nearby body-panel interfaces, verify that the grille design matches the stated application, and compare adjacent bumper and grille sections.

When preparing a Fit body repair, check the vehicle production date where available, review regional specification differences, and review headlamp shape changes between production phases. Before final installation, match the locator-slot arrangement, confirm the front installation position, and compare the complete OE marking with the removed part.

Headlight Mounting Bracket Design and Replacement Notes

When comparing 71140-TF0-000 with the removed component, compare gloss level with the neighbouring trim, review fastening slots and clip seats, and check the interface with the lamp housing. When checking the headlamp opening, review the thickness around each mounting boss, review the direction of the locating tabs, and check the adjoining panel gap.

For the listed 2009 application, check the curvature beside the headlamp, check mirrored geometry against the required side, and review narrow tips for transport damage. Before the carton is sealed, review the distance between fastening points, compare mounting-hole height, and inspect both end geometries.

Before the original trim or bracket is discarded, inspect reinforcement features behind the part, compare reusable clips and hardware, and check the interface with the lamp housing. Before clips or hardware are transferred, inspect the overall frame width, compare surrounding grille openings, and review the thickness around each mounting boss.

Application-Specific Identification

At receiving inspection with 71140-TF0-000 on the Fit 2009: compare the complete OE marking with the removed part. The HD02009-045 sample for the right side should compare the profile below the lamp lens. Before installation, keep the removed part nearby for comparison; for a quotation, include the complete OE reference.

For application-specific sourcing with 71140-TF0-000 on the Fit 2009: confirm the decorative finish or painted surface. The HD02009-045 sample for the right side should compare surrounding grille openings. Before installation, check lamp-to-trim clearance; for a quotation, separate left and right items in the packing list.

At receiving inspection with 71140-TF0-000 on the Fit 2009: verify the left or right mounting side. The HD02009-045 sample for the right side should review the thickness around each mounting boss. Before installation, verify that the headlamp remains centred; for a quotation, request the applicable export terms.

Installation Guidance

Before confirming this headlight accessory, confirm that every locator engages, replace distorted clips before final assembly, and inspect broken vehicle-side mounts. Before the quotation is confirmed, tighten hardware only after alignment, protect painted and chrome surfaces, and inspect the surrounding guides.

For a body-shop order covering HONDA, protect exposed edges during removal, review whether separate hardware is needed, and check the final perimeter around the lamp. Before packing the confirmed item, confirm an evenly seated fit, review completed left-to-right alignment, and inspect the surrounding guides.

When comparing 71140-TF0-000 with the removed component, confirm a consistent bumper gap, confirm that the hood and fender clearances remain even, and support adjacent body panels evenly. For an application-specific order, keep the removed part nearby for comparison, inspect the surrounding guides, and reinstall removed seals in their original positions.

Product Technical Specifications

Wholesale Supply and Packing

When reviewing the visible finish on HD02009-045, agree the acceptable delivery window, state the destination port or city, and confirm replacement-part documentation needs. Before final installation, confirm the requested delivery schedule, state the required order quantity, and request protective inner wrapping.

Before sourcing this front right headlight mounting bracket, confirm the required finish, state the target vehicle application, and confirm the packing method. At the workshop preparation stage, request corner protection for long moulded parts, request moisture protection for sea freight, and agree the acceptable delivery window.

Before confirming this headlight accessory, confirm sample-order requirements, provide the consignee contact information, and include the complete OE reference. For a repeat wholesale purchase, confirm the requested delivery schedule, request a packing-list breakdown by item code, and confirm whether clips are required separately.

Frequently Asked Questions

Are clips and screws supplied with 71140-TF0-000?

The supply scope follows the photographs. Reusable clips, screws, retainers or separate brackets should be confirmed before the order is finalized. For Fit, verify the trim package named in the application; inspect both end geometries; protect painted and chrome surfaces; and separate left and right items in the packing list before fitting or quotation.

Which side uses 71140-TF0-000?

This front right headlight mounting bracket is catalogued for the right front headlamp area. Opposite-side parts normally use mirrored geometry and a different reference. For Fit, inspect the original lamp-support geometry; compare the centre alignment point; reinstall removed seals in their original positions; and confirm the required finish before fitting or quotation.

What should be inspected when 71140-TF0-000 arrives?

Check the item label, contour, finish, locating features, mounting points and carton condition before fitting or discarding the packaging. For Fit, compare the installation direction; check the curvature beside the headlamp; confirm an evenly seated fit; and provide the consignee contact information before fitting or quotation.

Which vehicle application is listed for 71140-TF0-000?

71140-TF0-000 is listed for HONDA Fit 2009. The complete OE reference, production year, body specification and mounting side should agree with the removed component. For Fit, check nearby body-panel interfaces; review the direction of the locating tabs; transfer reusable clips carefully; and retain the product and carton labels before fitting or quotation.

How should 71140-TF0-000 be packed for export?

The front right headlight mounting bracket should be supported inside the carton, with projecting tabs, narrow ends and visible surfaces protected against abrasion and compression. For Fit, review the orientation of the moulded bracket; compare the original edge profile; verify that no fastener is cross-threaded; and request moisture protection for sea freight before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-TF0-000, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.