71140-T9A-T00 Front Right Headlight Mounting Bracket for HONDA City 2015

71140-T9A-T00 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-T9A-T00 is a front right headlight mounting bracket intended for HONDA City 2015. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for City

When separating nearby City variants, review regional specification differences, check whether the original part is mirrored, and compare adjacent bumper and grille sections. While reviewing the supplied photographs, match the body style and equipment grade, verify the trim package named in the application, and check the vehicle production date where available.

When reviewing the visible finish on HD02009-063, review facelift and pre-facelift styling, compare adjacent bumper and grille sections, and check nearby body-panel interfaces. Before final installation, confirm the destination-market version, verify the trim package named in the application, and review headlamp shape changes between production phases.

Before sourcing this front right headlight mounting bracket, check nearby body-panel interfaces, verify that the grille design matches the stated application, and compare adjacent bumper and grille sections. At the workshop preparation stage, confirm whether the vehicle uses a special appearance package, review facelift and pre-facelift styling, and check whether the original part is mirrored.

Headlight Mounting Bracket Design and Replacement Notes

During left-versus-right inventory selection, inspect the junction with the fender edge, check the depth of the moulded locator channels, and compare gloss level with the neighbouring trim. Before the carton is sealed, review the distance between fastening points, inspect the visible face for transport scuffing, and inspect the moulded front face and rear ribs.

For replacement in the right front headlamp area, compare the original edge profile, review narrow tips for transport damage, and review the outer-edge shape. Before clips or hardware are transferred, compare gloss level with the neighbouring trim, review fastening slots and clip seats, and check the interface with the lamp housing.

When separating nearby City variants, check the transition to the bumper or grille, inspect the junction with the fender edge, and inspect the back-side support structure. At the alignment stage, review the direction of the locating tabs, compare surrounding grille openings, and inspect reinforcement features behind the part.

Application-Specific Identification

For side-specific inventory control with 71140-T9A-T00 on the City 2015: compare the installation direction. The HD02009-063 sample for the right side should inspect the moulded front face and rear ribs. Before installation, review completed left-to-right alignment; for a quotation, request protective inner wrapping.

Before workshop installation with 71140-T9A-T00 on the City 2015: check nearby body-panel interfaces. The HD02009-063 sample for the right side should inspect reinforcement features behind the part. Before installation, verify that no fastener is cross-threaded; for a quotation, review edge protection inside the carton.

A trim-level comparison requires with 71140-T9A-T00 on the City 2015: confirm the destination-market version. The HD02009-063 sample for the right side should compare the profile below the lamp lens. Before installation, review completed left-to-right alignment; for a quotation, confirm the requested delivery schedule.

Installation Guidance

During an OE-led review for HD02009-063, replace distorted clips before final assembly, verify that no fastener is cross-threaded, and protect painted and chrome surfaces. Before packing the confirmed item, avoid bending narrow moulded tabs, check the final perimeter around the lamp, and complete a visual check under even lighting.

For wholesale selection of 71140-T9A-T00, inspect the lamp aim after surrounding parts are refitted, check lamp-to-trim clearance, and reinstall removed seals in their original positions. For an application-specific order, confirm that every locator engages, replace distorted clips before final assembly, and inspect broken vehicle-side mounts.

During left-versus-right inventory selection, clean the lamp and bumper mounting area, support adjacent body panels evenly, and protect painted and chrome surfaces. During receiving inspection, trial-fit the component without force, align the headlamp edge before fastening, and inspect broken vehicle-side mounts.

Product Technical Specifications

Wholesale Supply and Packing

During comparison with the original lamp surround, support long trim sections during transit, confirm the requested delivery schedule, and confirm pallet requirements for larger quantities. At the workshop preparation stage, request supported export-carton packing, confirm the packing method, and list every OE reference on the purchase order.

Before confirming export packing for 71140-T9A-T00, confirm whether clips are required separately, state any outer-carton marking requirements, and compare the supplied product photographs. For a repeat wholesale purchase, separate painted and unpainted variants, check the ordered mounting side, and confirm the nominated freight forwarder.

During an OE-led review for HD02009-063, state the destination port or city, confirm barcode or private-label requirements, and confirm pallet requirements for larger quantities. During the physical comparison, confirm replacement-part documentation needs, protect projecting locator tabs, and confirm whether clips are required separately.

Frequently Asked Questions

How should 71140-T9A-T00 be checked before installation?

Compare the OE number, overall outline, locating tabs, screw points, surface finish and lamp-side contour with the removed part before hardware is tightened. For City, confirm the destination-market version; review the distance between fastening points; protect painted and chrome surfaces; and list every OE reference on the purchase order before fitting or quotation.

Does the finish specification matter for 71140-T9A-T00?

Yes. Different vehicle grades can change colour, coating, visible texture and locating details, so compare the original part carefully. For City, compare every locating point and screw opening; review the direction of the locating tabs; reinstall removed seals in their original positions; and confirm the preferred incoterm before fitting or quotation.

Does 71140-T9A-T00 include a complete headlamp assembly?

No. This page covers the pictured front right headlight mounting bracket. Lamps, bulbs, wiring, modules and separate fasteners are not included unless visibly shown in the product photographs. For City, compare the stamped or moulded reference; review fastening slots and clip seats; confirm an evenly seated fit; and ask for carton dimensions before freight booking before fitting or quotation.

Are clips and screws supplied with 71140-T9A-T00?

The supply scope follows the photographs. Reusable clips, screws, retainers or separate brackets should be confirmed before the order is finalized. For City, check the vehicle production date where available; review narrow tips for transport damage; transfer reusable clips carefully; and state whether left and right pairs should be bundled before fitting or quotation.

Which side uses 71140-T9A-T00?

This front right headlight mounting bracket is catalogued for the right front headlamp area. Opposite-side parts normally use mirrored geometry and a different reference. For City, verify that the grille design matches the stated application; inspect the back-side support structure; verify that no fastener is cross-threaded; and provide the consignee contact information before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-T9A-T00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.