71140-T5R-A00 Front Right Headlight Mounting Bracket for HONDA Fit 2015

71140-T5R-A00 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-T5R-A00 is a front right headlight mounting bracket intended for HONDA Fit 2015. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Fit

When comparing 71140-T5R-A00 with the removed component, compare adjacent bumper and grille sections, verify the left or right mounting side, and confirm whether the vehicle uses a special appearance package. For an application-specific order, compare the installation direction, review facelift and pre-facelift styling, and confirm the exact model year before placing the order.

For the listed 2015 application, confirm the destination-market version, confirm whether the vehicle uses a special appearance package, and review regional specification differences. During receiving inspection, match the outer profile around the headlamp, compare the installation direction, and review headlamp shape changes between production phases.

Before the original trim or bracket is discarded, review headlamp shape changes between production phases, compare adjacent bumper and grille sections, and compare the complete OE marking with the removed part. When organizing mixed-OE inventory, compare the installation direction, retain the original component for a direct comparison, and check whether the original part is mirrored.

Headlight Mounting Bracket Design and Replacement Notes

Before confirming this headlight accessory, compare the visible texture and finish, check the adjoining panel gap, and inspect the back-side support structure. For a repeat wholesale purchase, compare mounting-hole height, confirm decorative surface details, and inspect moulded corners before installation.

For a body-shop order covering HONDA, inspect the back-side support structure, check the depth of the moulded locator channels, and inspect reinforcement features behind the part. During the physical comparison, check mirrored geometry against the required side, compare the centre alignment point, and compare mounting-hole height.

When comparing 71140-T5R-A00 with the removed component, confirm decorative surface details, review narrow tips for transport damage, and inspect the moulded front face and rear ribs. When checking the headlamp opening, compare surrounding grille openings, check the adjoining panel gap, and compare the original edge profile.

Application-Specific Identification

OE identification begins with 71140-T5R-A00 on the Fit 2015: inspect the original lamp-support geometry. The HD02009-053 sample for the right side should inspect moulded corners before installation. Before installation, confirm that every locator engages; for a quotation, request supported export-carton packing.

A vehicle-side comparison starts with 71140-T5R-A00 on the Fit 2015: match the outer profile around the headlamp. The HD02009-053 sample for the right side should compare the profile below the lamp lens. Before installation, review whether separate hardware is needed; for a quotation, confirm the preferred incoterm.

Before a replacement is packed with 71140-T5R-A00 on the Fit 2015: compare every locating point and screw opening. The HD02009-053 sample for the right side should check the curvature beside the headlamp. Before installation, inspect the lamp aim after surrounding parts are refitted; for a quotation, list every OE reference on the purchase order.

Installation Guidance

When reviewing the visible finish on HD02009-053, confirm the correct fitting direction, tighten hardware only after alignment, and inspect the lamp aim after surrounding parts are refitted. For a no-force trial fit, trial-fit the component without force, inspect each screw or clip point, and verify that the headlamp remains centred.

Before sourcing this front right headlight mounting bracket, inspect the surrounding guides, support adjacent body panels evenly, and confirm a consistent bumper gap. While checking adjacent body parts, protect painted and chrome surfaces, verify that the headlamp remains centred, and trial-fit the component without force.

Before confirming this headlight accessory, replace distorted clips before final assembly, reinstall removed seals in their original positions, and inspect the lamp aim after surrounding parts are refitted. Before the quotation is confirmed, reconfirm the OE reference after the trial fit, clean the lamp and bumper mounting area, and trial-fit the component without force.

Product Technical Specifications

Wholesale Supply and Packing

For replacement in the right front headlamp area, confirm replacement-part documentation needs, state estimated annual purchasing volume, and confirm pallet requirements for larger quantities. When organizing mixed-OE inventory, retain the product and carton labels, confirm barcode or private-label requirements, and send photographs of the removed component.

When separating nearby Fit variants, request supported export-carton packing, protect projecting locator tabs, and support long trim sections during transit. While reviewing the supplied photographs, inspect the carton at receiving, retain the product and carton labels, and confirm sample-order requirements.

When reviewing the visible finish on HD02009-053, state the target vehicle application, confirm the requested delivery schedule, and ask for carton dimensions before freight booking. Before final installation, check sample approval before mass shipment, protect projecting locator tabs, and check the ordered mounting side.

Frequently Asked Questions

Does 71140-T5R-A00 include a complete headlamp assembly?

No. This page covers the pictured front right headlight mounting bracket. Lamps, bulbs, wiring, modules and separate fasteners are not included unless visibly shown in the product photographs. For Fit, compare the installation direction; inspect both end geometries; check that no locator is trapped behind the bumper; and identify mixed-OE orders clearly before fitting or quotation.

Are clips and screws supplied with 71140-T5R-A00?

The supply scope follows the photographs. Reusable clips, screws, retainers or separate brackets should be confirmed before the order is finalized. For Fit, verify the trim package named in the application; compare the centre alignment point; photograph the completed installation for order records; and state estimated annual purchasing volume before fitting or quotation.

Which side uses 71140-T5R-A00?

This front right headlight mounting bracket is catalogued for the right front headlamp area. Opposite-side parts normally use mirrored geometry and a different reference. For Fit, confirm whether the vehicle uses a special appearance package; check the curvature beside the headlamp; transfer reusable clips carefully; and retain the product and carton labels before fitting or quotation.

What should be inspected when 71140-T5R-A00 arrives?

Check the item label, contour, finish, locating features, mounting points and carton condition before fitting or discarding the packaging. For Fit, compare the complete OE marking with the removed part; review the direction of the locating tabs; protect exposed edges during removal; and send photographs of the removed component before fitting or quotation.

Which vehicle application is listed for 71140-T5R-A00?

71140-T5R-A00 is listed for HONDA Fit 2015. The complete OE reference, production year, body specification and mounting side should agree with the removed component. For Fit, verify the left or right mounting side; compare the original edge profile; tighten hardware only after alignment; and confirm the nominated freight forwarder before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-T5R-A00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.