71140-SAA-000 Front Right Headlight Mounting Bracket for HONDA Fit 2004

71140-SAA-000 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-SAA-000 is a front right headlight mounting bracket intended for HONDA Fit 2004. Confirm the right orientation, lamp-side contour, mounting geometry and hatchback body against the original vehicle part.

Fitment and Application for Fit

For wholesale selection of 71140-SAA-000, confirm the decorative finish or painted surface, compare every locating point and screw opening, and check the lamp manufacturer where multiple units were fitted. When checking the headlamp opening, inspect the original lamp-support geometry, check the vehicle production date where available, and review regional specification differences.

During left-versus-right inventory selection, compare the headlight outline at both ends, check the lamp manufacturer where multiple units were fitted, and retain the original component for a direct comparison. Before the carton is sealed, compare adjacent bumper and grille sections, inspect the original lamp-support geometry, and match the accessory to the original bumper revision.

For replacement in the right front headlamp area, match the accessory to the original bumper revision, confirm the decorative finish or painted surface, and match the body style and equipment grade. Before clips or hardware are transferred, inspect the original lamp-support geometry, check the relationship with the lamp housing, and review headlamp shape changes between production phases.

Headlight Mounting Bracket Design and Replacement Notes

Before confirming export packing for 71140-SAA-000, inspect the back-side support structure, compare mounting-hole height, and confirm decorative surface details. Before the quotation is confirmed, inspect moulded corners before installation, inspect the junction with the fender edge, and review the distance between fastening points.

During an OE-led review for HD02009-041, confirm decorative surface details, review the direction of the locating tabs, and check the interface with the lamp housing. Before packing the confirmed item, compare gloss level with the neighbouring trim, review narrow tips for transport damage, and inspect moulded corners before installation.

For wholesale selection of 71140-SAA-000, inspect the junction with the fender edge, review nearby cover openings, and review fastening slots and clip seats. For an application-specific order, check the depth of the moulded locator channels, compare mounting-hole height, and check the transition to the bumper or grille.

Application-Specific Identification

When the headlamp outline is reviewed with 71140-SAA-000 on the Fit 2004: review the orientation of the moulded bracket. The HD02009-041 sample for the right side should inspect both end geometries. Before installation, complete a visual check under even lighting; for a quotation, state estimated annual purchasing volume.

Before workshop installation with 71140-SAA-000 on the Fit 2004: confirm whether the vehicle uses a special appearance package. The HD02009-041 sample for the right side should inspect the visible face for transport scuffing. Before installation, tighten hardware only after alignment; for a quotation, confirm pallet requirements for larger quantities.

OE identification begins with 71140-SAA-000 on the Fit 2004: review the orientation of the moulded bracket. The HD02009-041 sample for the right side should inspect the moulded front face and rear ribs. Before installation, use hand pressure only during the initial engagement; for a quotation, confirm barcode or private-label requirements.

Installation Guidance

When preparing a Fit body repair, inspect the lamp aim after surrounding parts are refitted, trial-fit the component without force, and inspect each screw or clip point. Before final installation, verify that the headlamp remains centred, use hand pressure only during the initial engagement, and protect painted and chrome surfaces.

During comparison with the original lamp surround, clean the lamp and bumper mounting area, inspect the surrounding guides, and support adjacent body panels evenly. At the workshop preparation stage, confirm a consistent bumper gap, protect painted and chrome surfaces, and verify that the headlamp remains centred.

Before confirming export packing for 71140-SAA-000, transfer reusable clips carefully, avoid bending narrow moulded tabs, and inspect each screw or clip point. For a repeat wholesale purchase, review whether separate hardware is needed, review completed left-to-right alignment, and verify that the headlamp remains centred.

Product Technical Specifications

Wholesale Supply and Packing

Before the original trim or bracket is discarded, request corner protection for long moulded parts, provide the destination country, and confirm the packing method. Before clips or hardware are transferred, separate painted and unpainted variants, state the target vehicle application, and state whether left and right pairs should be bundled.

For HONDA Fit 2004, list every OE reference on the purchase order, request moisture protection for sea freight, and confirm pallet requirements for larger quantities. At the alignment stage, state any outer-carton marking requirements, separate painted and unpainted variants, and confirm the nominated freight forwarder.

When preparing a Fit body repair, request a packing-list breakdown by item code, request supported export-carton packing, and compare the supplied product photographs. For a no-force trial fit, identify mixed-OE orders clearly, request moisture protection for sea freight, and state the required order quantity.

Frequently Asked Questions

Is a sample order available for 71140-SAA-000?

Sample and wholesale arrangements can be discussed after the OE reference, vehicle application, required side, quantity and destination are provided. For Fit, check the lamp manufacturer where multiple units were fitted; compare surrounding grille openings; route nearby wiring away from sharp edges; and confirm barcode or private-label requirements before fitting or quotation.

What information should be sent with a 71140-SAA-000 enquiry?

Send the complete OE number, vehicle details, installation side, photographs of the original part, quantity and delivery destination. For Fit, match the locator-slot arrangement; measure the removed part where references are unclear; protect exposed edges during removal; and state the target vehicle application before fitting or quotation.

Should damaged vehicle-side mounts be checked before fitting 71140-SAA-000?

Yes. Broken lamp tabs, distorted bumper guides or missing retainers can prevent correct alignment even when the replacement reference is correct. For Fit, retain the original component for a direct comparison; inspect both end geometries; protect painted and chrome surfaces; and request a packing-list breakdown by item code before fitting or quotation.

Can photographs alone confirm 71140-SAA-000 compatibility?

Photographs are useful for visual comparison, but the OE reference, model year, side, trim level and mounting geometry should also match. For Fit, compare the stamped or moulded reference; compare gloss level with the neighbouring trim; check that no locator is trapped behind the bumper; and separate left and right items in the packing list before fitting or quotation.

Can 71140-SAA-000 fit every Fit model year?

No. Styling updates and market versions can change the mounting layout. Use the listed year and OE number as the starting point for confirmation. For Fit, compare adjacent bumper and grille sections; confirm decorative surface details; review whether separate hardware is needed; and support long trim sections during transit before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-SAA-000, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.