71130-T6L-H00 Bumper Reinforcement for HONDA Spirior 2015 Front
Primary OE reference: 71130-T6L-H00
Product type: Bumper Reinforcement
Applicable vehicle: HONDA Spirior 2015
Installation position: Front bumper
Brand: HONDA
Model: Spirior
Vehicle year: 2015
Physical comparison: Lay the original and replacement parts on for 71130-T6L-H00 a flat surface to compare curvature, flange angle and overall reach.
Component design: The component occupies the space between the for 71130-T6L-H00 bumper skin and vehicle body, where bracket offset determines fitment.
Installation guidance: Remove the bumper cover using the workshop for 71130-T6L-H00 sequence, support surrounding trim and expose all original fasteners before loosening the beam.
Wholesale enquiry: A rear-view photograph of the removed component for 71130-T6L-H00 helps confirm hidden brackets before volume ordering.
71130-T6L-H00 Bumper Reinforcement Overview
This 71130-T6L-H00 listing covers the front bumper reinforcement for HONDA Spirior 2015. Its photographed mounting form identifies the supplied version.
The assembly combines a transverse section with for 71130-T6L-H00 model-specific end supports for the stated vehicle position.
Model-Year and Position Confirmation
Use the removed assembly as a physical for 71130-T6L-H00 gauge for bracket height, beam sweep and fastener orientation.
Confirm 71130-T6L-H00 against the production period and front bumper location. Similar covers on HONDA Spirior 2015 can conceal different support sections.
Physical Comparison Points
The supplied part is intended for a for 71130-T6L-H00 defined bumper position, with attachment details that are not universal across facelifts.
Check the outer mounting plates, central section for 71130-T6L-H00 profile and distance between chassis-side attachment points.
Practical Replacement Notes
Inspect the chassis-side threads, compare the removed for 71130-T6L-H00 part and complete a full dry fit before refinishing exposed metal.
Before installing 71130-T6L-H00, a qualified repair professional should assess collision distortion at the HONDA Spirior 2015 mounting faces.
Automotive Component Specifications
| Product type | Bumper Reinforcement |
|---|---|
| Primary OE reference | 71130-T6L-H00 |
| Cross-reference numbers | 71130-T6L-H00 |
| Internal item code | HD03004-012 |
| Vehicle brand | HONDA |
| Vehicle model | Spirior |
| Model year | 2015 |
| Installation position | Front bumper |
Trade Ordering Notes
State whether the requirement is a metal for 71130-T6L-H00 reinforcement or foam energy absorber so the correct product form is selected.
Frequently Asked Questions
How is 71130-T6L-H00 fitment verified?
Confirm 71130-T6L-H00 against HONDA Spirior 2015, the front position and the complete mounting geometry shown in the product photo.
Which physical points should be compared?
Check whether the beam ends step upward for 71130-T6L-H00 or downward and confirm the bracket faces align without preload.
Is 71130-T6L-H00 a universal bumper component?
No. The 71130-T6L-H00 span, absorber profile, brackets and mounting points are specific to HONDA Spirior 2015.
What preparation is recommended for 71130-T6L-H00?
Keep wiring, parking-sensor looms and air guides for 71130-T6L-H00 clear while bringing the beam into the vehicle-side mounting position.
Which details support a 71130-T6L-H00 trade quotation?
For consolidated export orders, list each application for 71130-T6L-H00 separately and confirm packing protection for projecting brackets.
Need a quotation for 71130-T6L-H00? Contact Yongshang Auto with vehicle, bumper position, quantity and destination.
