71121-TW1-H01 Front Grille for HONDA Crosstour 2014
Primary OE reference: 71121-TW1-H01
Cross-reference number 1: 71121-TW1-H01
Cross-reference number 2: 71121TW1H01
Product type: Front Grille
Vehicle application: HONDA Crosstour 2014
Installation position: Front grille / radiator opening
Brand: HONDA
Model: Crosstour
Model year: 2014
Product function: Front Grille supports the designed appearance of the front end after collision repair and keeps the grille opening organised around the model-specific mounting pattern.
Fitment check: Compare the original grille frame, mounting tabs, mesh pattern and surrounding trim interfaces.
Supply scope: Badges, cameras, sensors and separate brackets are supplied only when specifically pictured or agreed.
Finish note: Chrome, matte, gloss and painted variants should be listed separately on mixed orders.
Internal item code: HD02011-013
Quotation information: Include the full OE reference, VIN if available, quantity and delivery address.
71121-TW1-H01 Front Grille Product Overview
71121-TW1-H01 is listed as a front grille for HONDA Crosstour 2014. This product page records the OE reference, vehicle application, supplied scope and practical fitment information needed for replacement-part sourcing.
Application and Product Function
On HONDA Crosstour 2014, this front grille is intended to complete the emblem area for the recorded trim, organise the bumper opening with model-specific geometry, and organise the lamp-side contour ahead of the radiator. Its application-shaped frame can also re-establish the mesh opening around adjacent mouldings, organise the emblem area ahead of the radiator, and maintain the lamp-side contour during collision repair.
Fitment Confirmation
Treat 71121-TW1-H01 as the primary identity for this part. For HONDA Crosstour 2014, verify suitability by checking the source vehicle and then measure the clip direction across both grille faces, confirm the bonnet gap for the destination market, and measure the mesh pattern using product photographs. A physical comparison should additionally review the badge mounting against the removed grille, inspect the original sample before a quotation, and compare the model designation with vehicle build data.
Installation and Handling
Before removing the original grille, release the retaining clips after the dry fit and support the emblem bracket after the dry fit. During trial fitting of HD02011-013, protect the air guides before final fastening and support the screw points before the road test. Before the bumper is fully reassembled, transfer the reusable hardware after the dry fit and recheck the emblem bracket after the dry fit.
Product Technical Specifications
| Product type | Front Grille |
|---|---|
| Primary OE reference | 71121-TW1-H01 |
| Cross-reference numbers | 71121-TW1-H01 71121TW1H01 |
| Internal item code | HD02011-013 |
| Vehicle brand | HONDA |
| Vehicle model | Crosstour |
| Model year | 2014 |
| Installation position | Front grille / radiator opening |
| Primary function | Application-specific exterior grille and front air-entry component |
Quality Inspection and Protective Packing
Receiving inspection for 71121-TW1-H01 should include review the rear ribs for repeat-lot control, measure the carton supports before installation, and protect the outer frame before installation. Before the part is fitted or repacked, the handler should also review the edge straightness on both visible faces, check the approved sample before installation, and compare the packed accessories for repeat-lot control.
Wholesale Supply Information
To quote HD02011-013 accurately, the enquiry should state the destination market for mixed-model orders, request the required quantity to the sales team, and list the sample request before pricing. For samples, mixed-model cartons or repeat purchasing, please send the packing breakdown for mixed-model orders, provide the delivery address before volume production, and send the delivery address for freight calculation.
Frequently Asked Questions
Does the finish of 71121-TW1-H01 need confirmation?
Yes. Grilles can differ in black, chrome, silver, painted or textured treatments. Compare the photographed finish with the required vehicle specification.
Why are camera and emblem openings important for 71121-TW1-H01?
Their size and position can vary by trim and market. Confirm the required openings so transferred equipment aligns correctly.
Are clips and fasteners supplied with 71121-TW1-H01?
Reusable vehicle hardware is not automatically included. Check the photos and confirm clips, brackets and screws before finalising the order.
How should 71121-TW1-H01 be protected during shipping?
The visible face and unsupported corners should be isolated from rubbing and pressure, while the carton supports the frame without compressing the mesh.
How should fitment for 71121-TW1-H01 be confirmed?
Use the complete OE number, vehicle model and year, grille position, trim level and rear mounting pattern. A similar front view is not enough for approval.
