71121-SOL-H01 Front Grille for HONDA G11 2011
Primary OE reference: 71121-SOL-H01
Cross-reference number 1: 71121-SOL-H01
Cross-reference number 2: 71121SOLH01
Product type: Front Grille
Vehicle application: HONDA G11 2011
Installation position: Front grille / radiator opening
Brand: HONDA
Model: G11
Model year: 2011
Product function: Front Grille keeps the centre opening consistent with the surrounding bonnet and lamp lines and uses application-moulded edges rather than a universal cut-to-fit outline.
Fitment check: Compare the complete reference, grille depth and adjacent moulding interfaces.
Supply scope: Confirm whether the order needs the grille only or additional emblem, trim and mounting parts.
Finish note: Do not assume a colour from the OE family alone; confirm the photographed finish.
Internal item code: HD02011-033
Quotation information: For mixed orders, list each OE number, finish, quantity and consignee separately.
71121-SOL-H01 Front Grille Product Overview
71121-SOL-H01 is listed as a front grille for HONDA G11 2011. This product page records the OE reference, vehicle application, supplied scope and practical fitment information needed for replacement-part sourcing.
Application and Product Function
On HONDA G11 2011, this front grille is intended to align the central fascia line with model-specific geometry, maintain the lamp-side contour during collision repair, and support the cooling-module entrance for the recorded trim. Its application-shaped frame can also maintain the bumper opening after grille damage, complete the trim transition with model-specific geometry, and preserve the radiator airflow path ahead of the radiator.
Fitment Confirmation
Treat 71121-SOL-H01 as the primary identity for this part. For HONDA G11 2011, verify suitability by checking the source vehicle and then review the assembly scope on the target bumper, cross-check the opening dimensions using product photographs, and document the hole spacing using product photographs. A physical comparison should additionally cross-check the assembly scope at the front opening, confirm the hole spacing with the retained hardware, and confirm the assembly scope for the stated model year.
Installation and Handling
Before removing the original grille, align the air guides before final fastening and clean the centre points while the bumper is supported. During trial fitting of HD02011-033, seat the painted edges while the bumper is supported and release the retaining clips before the road test. Before the bumper is fully reassembled, transfer the grille frame before final fastening and support the camera mount before the road test.
Product Technical Specifications
| Product type | Front Grille |
|---|---|
| Primary OE reference | 71121-SOL-H01 |
| Cross-reference numbers | 71121-SOL-H01 71121SOLH01 |
| Internal item code | HD02011-033 |
| Vehicle brand | HONDA |
| Vehicle model | G11 |
| Model year | 2011 |
| Installation position | Front grille / radiator opening |
| Primary function | Application-specific exterior grille and front air-entry component |
Quality Inspection and Protective Packing
Receiving inspection for 71121-SOL-H01 should include record the outer frame against the order line, verify the item label before installation, and measure the camera aperture under neutral lighting. Before the part is fitted or repacked, the handler should also compare the unsupported corners with the carton open, record the packed accessories against the order line, and confirm the coated surfaces on both visible faces.
Wholesale Supply Information
To quote HD02011-033 accurately, the enquiry should confirm the vehicle details to the sales team, state the finish version on the enquiry, and provide the internal item code for export planning. For samples, mixed-model cartons or repeat purchasing, please request the required quantity with each order line, list the required quantity before volume production, and confirm the destination market for freight calculation.
Frequently Asked Questions
Does the finish of 71121-SOL-H01 need confirmation?
Yes. Grilles can differ in black, chrome, silver, painted or textured treatments. Compare the photographed finish with the required vehicle specification.
Why are camera and emblem openings important for 71121-SOL-H01?
Their size and position can vary by trim and market. Confirm the required openings so transferred equipment aligns correctly.
Are clips and fasteners supplied with 71121-SOL-H01?
Reusable vehicle hardware is not automatically included. Check the photos and confirm clips, brackets and screws before finalising the order.
How should 71121-SOL-H01 be protected during shipping?
The visible face and unsupported corners should be isolated from rubbing and pressure, while the carton supports the frame without compressing the mesh.
How should fitment for 71121-SOL-H01 be confirmed?
Use the complete OE number, vehicle model and year, grille position, trim level and rear mounting pattern. A similar front view is not enough for approval.
