71119-TKM-H00 Bumper Trim Molding for HONDA Elysion 2019 Left
Primary OE reference: 71119-TKM-H00
Cross-reference number 1: 71119-TKM-H00
Cross-reference number 2: 71119TKMH00
Product: Bumper Trim Molding
Vehicle: HONDA Elysion 2019
Installation area: Front
Side / orientation: Left
Surface detail: verify against the original part
Internal item code: HD02005-158
Fitment note: confirm the vehicle market; compare the mounting direction; confirm the production year before ordering 71119-TKM-H00
Product comparison: check the panel transition; review transferred hardware; compare visible edge height against the removed bumper trim molding
Installation note: inspect the surrounding guides; avoid bending long sections; confirm the final trim gap on the Elysion
Wholesale enquiry: provide the delivery country; confirm the delivery schedule; confirm separate accessory needs for HD02005-158
Application guidance: The verify against the original part bumper trim molding belongs to the front area of HONDA Elysion 2019. Also compare the mounting direction, review the outer-edge shape, check adjacent panel gaps, and request protective inner packing.
71119-TKM-H00 Bumper Trim Molding Product Overview
HONDA Elysion 2019 buyers can begin identification with 71119-TKM-H00. This bumper trim molding is registered under HD02005-158, with left orientation retained for quotation, sample review and receiving control.
The verify against the original part bumper trim molding belongs to the front area of HONDA Elysion 2019. Also compare the mounting direction, review the outer-edge shape, check adjacent panel gaps, and request protective inner packing.
Fitment and Application for Elysion
For wholesale selection of 71119-TKM-H00, compare the complete OE number, confirm the installation position, and match the original clip spacing. Before final installation, inspect the original contour, review the end profiles, and match the stated body style.
Before sourcing this bumper trim molding for Elysion, compare every attachment point, review market-specific styling, and compare the removed trim. During receiving inspection, check adjacent garnish pieces, confirm the vehicle market, and match the stated body style.
Before confirming this verify against the original part bumper trim molding, compare the removed trim, confirm the vehicle market, and inspect the original contour. Before the quotation is confirmed, check the vehicle build date, compare the mounting direction, and verify the mounting side.
Bumper Trim Molding Design and Replacement Notes
For a replacement on the left front area, compare the original edge profile, check the moulding curvature, and compare the end termination. For a repeat wholesale order, check the panel transition, compare gloss or plating, and check the adjoining gap.
When separating nearby Elysion trim variants, check the panel transition, review transferred hardware, and compare visible edge height. While reviewing the supplied photographs, inspect the locator direction, check the panel transition, and review transferred hardware.
When comparing 71119-TKM-H00 with the removed part, compare the original length, compare the original edge profile, and compare gloss or plating. Before final installation, compare visible edge height, compare the end termination, and compare the original length.
For a direct comparison of 71119-TKM-H00, match the original clip spacing, inspect narrow moulding ends, protect painted panel edges, and confirm the packing method. The bumper trim molding should match the original left front profile before it is installed or released for shipment.
Installation Guidance
For wholesale selection of 71119-TKM-H00, align the centre first, confirm locator engagement, and inspect every screw point. When checking the visible exterior face, check the final perimeter, confirm the final trim gap, and trial-fit without force.
Before sourcing this bumper trim molding for Elysion, retain the removed component, confirm an even seated fit, and trial-fit without force. At the workshop preparation stage, retain the removed component, confirm an even seated fit, and trial-fit without force.
Before confirming this verify against the original part bumper trim molding, check the final perimeter, review the completed alignment, and confirm the final trim gap. For a repeat wholesale order, support the trim evenly, trial-fit without force, and inspect damaged mounting points.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71119-TKM-H00 |
| Cross-reference numbers | 71119-TKM-H00 71119TKMH00 |
| Internal item code | HD02005-158 |
| Vehicle brand | HONDA |
| Vehicle model | Elysion |
| Model year | 2019 |
| Installation area | Front |
| Side / orientation | Left |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Elysion 2019 |
Wholesale Supply and Packing
For a replacement on the left front area, retain the product label, check the ordered mounting side, and request protective inner packing. Before clips or hardware are transferred, request supported carton packing, state the target application, and request export quotation terms.
When separating nearby Elysion trim variants, check the ordered mounting side, state annual purchasing volume, and request export quotation terms. During the physical comparison, confirm the packing method, state the destination port, and confirm the delivery schedule.
When comparing 71119-TKM-H00 with the removed part, request protective inner packing, include the complete OE number, and support the moulding length. When checking the visible exterior face, state the target application, check the ordered mounting side, and state the destination port.
Order review for 71119-TKM-H00 should connect supplier code HD02005-158 with the front application, buyer-approved photos and logistics instructions. Keep the same identifiers on samples and shipping paperwork.
Frequently Asked Questions
Can a photo alone verify 71119-TKM-H00?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71119-TKM-H00 and HD02005-158 with the removed part dimensions. For Elysion, check the vehicle build date, compare gloss or plating, protect the visible surface, and retain the product label before installation or quotation.
Is professional installation recommended for 71119-TKM-H00?
Yes. A workshop can dry-fit HD02005-158, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Elysion, confirm the vehicle market, examine the visible finish, review separate hardware needs, and confirm the surface requirement before installation or quotation.
Can the opposite-side trim replace 71119-TKM-H00?
Normally no. The listing specification details the left orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For Elysion, compare every attachment point, check the adjoining gap, check adjacent panel gaps, and request protective inner packing before installation or quotation.
What product does OE 71119-TKM-H00 identify?
71119-TKM-H00 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Elysion, review the end profiles, inspect the locator direction, confirm the final trim gap, and state annual purchasing volume before installation or quotation.
How should the position of 71119-TKM-H00 be confirmed?
This listing specification details a left component for the front area. Compare the removed part, mounting direction and termination points before confirmation. For Elysion, confirm the production year, compare the original length, inspect every screw point, and state the target application before installation or quotation.
Request a Quote
Send the complete OE reference 71119-TKM-H00, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
