71118-TBX-H51 Bumper Trim Molding for HONDA Inspire 2022 Left
Primary OE reference: 71118-TBX-H51
Cross-reference number 1: 71118-TBX-H51
Cross-reference number 2: 71118TBXH51
Product: Bumper Trim Molding
Vehicle: HONDA Inspire 2022
Installation area: Front
Side / orientation: Left
Surface detail: verify against the original part
Internal item code: HD02005-023
Fitment note: match the stated body style; review the end profiles; review facelift differences before ordering 71118-TBX-H51
Product comparison: compare the end termination; inspect the back-side structure; check the moulding curvature against the removed bumper trim molding
Installation note: support the trim evenly; transfer reusable clips carefully; check lamp-cover clearance on the Inspire
Wholesale enquiry: state the destination port; confirm the delivery schedule; state the destination port for HD02005-023
Application guidance: This bumper trim molding is intended for the left front position on Inspire. Also check nearby lamp openings, compare gloss or plating, check adjacent panel gaps, and request protective inner packing.
71118-TBX-H51 Bumper Trim Molding Product Overview
This application-led listing presents 71118-TBX-H51 as a bumper trim molding for HONDA Inspire 2022. Item HD02005-023 is intended for OE-number comparison rather than shape-only selection.
This bumper trim molding is intended for the left front position on Inspire. Also check nearby lamp openings, compare gloss or plating, check adjacent panel gaps, and request protective inner packing.
Fitment and Application for Inspire
For HONDA Inspire 2022, compare the complete OE number, check nearby lamp openings, and confirm the surface specification. Before packing the confirmed item, match the stated body style, review market-specific styling, and match the original clip spacing.
When preparing a Inspire exterior repair, compare every attachment point, confirm the installation position, and match the bumper outline. For a no-force trial fit, compare the removed trim, confirm the surface specification, and match the original clip spacing.
During comparison with the original bumper trim, compare the removed trim, compare the mounting direction, and review facelift differences. While checking adjacent body parts, confirm the installation position, review the end profiles, and confirm the vehicle market.
Bumper Trim Molding Design and Replacement Notes
For the listed 2022 application, inspect the locator direction, check the moulding curvature, and review the centre alignment. During receiving inspection, compare the end termination, inspect the fastening slots, and check the panel transition.
Before the removed component is discarded, review the surface texture, review transferred hardware, and review nearby cover openings. Before the quotation is confirmed, examine the visible finish, review the centre alignment, and review the surface texture.
During an OE-led check for HD02005-023, inspect the back-side structure, compare the original edge profile, and review the surface texture. Before packing the confirmed item, check the bumper interface, inspect the locator direction, and compare gloss or plating.
For a direct comparison of 71118-TBX-H51, compare the removed trim, review transferred hardware, confirm locator engagement, and confirm the delivery schedule. The bumper trim molding should match the original left front profile before it is installed or released for shipment.
Installation Guidance
For HONDA Inspire 2022, align the centre first, check adjacent panel gaps, and retain the removed component. While reviewing the supplied photographs, confirm the fitting direction, check the final perimeter, and inspect the surrounding guides.
When preparing a Inspire exterior repair, retain the removed component, check the final perimeter, and support the trim evenly. Before final installation, check adjacent panel gaps, confirm the fitting direction, and inspect the surrounding guides.
During comparison with the original bumper trim, check the final perimeter, confirm an even seated fit, and review the completed alignment. During receiving inspection, inspect the surrounding guides, confirm the final trim gap, and clean the mounting channel.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71118-TBX-H51 |
| Cross-reference numbers | 71118-TBX-H51 71118TBXH51 |
| Internal item code | HD02005-023 |
| Vehicle brand | HONDA |
| Vehicle model | Inspire |
| Model year | 2022 |
| Installation area | Front |
| Side / orientation | Left |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Inspire 2022 |
Wholesale Supply and Packing
For the listed 2022 application, protect projecting locators, state the target application, and state annual purchasing volume. At the workshop preparation stage, request protective inner packing, confirm the surface requirement, and retain the product label.
Before the removed component is discarded, review carton edge protection, confirm the delivery schedule, and protect projecting locators. For a repeat wholesale order, compare the supplied photographs, state the required quantity, and inspect the receiving condition.
During an OE-led check for HD02005-023, confirm the packing method, request protective inner packing, and send original-part photographs. While reviewing the supplied photographs, request supported carton packing, inspect the receiving condition, and state the target application.
Distributors sourcing 71118-TBX-H51 should keep HD02005-023 and the left position on every quotation revision. Sample confirmation, carton marking and repeat-order specification details should use the same part number chain.
Frequently Asked Questions
Does 71118-TBX-H51 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Inspire, check the vehicle build date, inspect narrow moulding ends, inspect damaged mounting points, and state annual purchasing volume before installation or quotation.
Is a model name alone enough to order 71118-TBX-H51?
No. The Inspire name is useful for discovery, but OE number 71118-TBX-H51, VIN or build data, side, finish and physical attachment points should agree. For Inspire, confirm the vehicle market, compare the original edge profile, review the completed alignment, and state the target application before installation or quotation.
What should be inspected when 71118-TBX-H51 arrives?
Check the bumper trim molding part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For Inspire, compare every attachment point, review transferred hardware, retain the removed component, and protect projecting locators before installation or quotation.
What information is needed for a 71118-TBX-H51 quotation?
Send HONDA Inspire 2022 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Inspire, review the end profiles, check the moulding curvature, protect the visible surface, and provide the delivery country before installation or quotation.
How should 71118-TBX-H51 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Inspire, confirm the production year, inspect the back-side structure, review separate hardware needs, and confirm the packing method before installation or quotation.
Request a Quote
Send the complete OE reference 71118-TBX-H51, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
