71116-TR3-A51 Front Right Fog Light Bezel for HONDA Civic 2014

71116-TR3-A51 Front Right Fog Light Bezel Product Overview

The product shown under 71116-TR3-A51 is a front right fog light bezel intended for HONDA Civic 2014. Check the right orientation, lamp opening, mounting tabs and small-format specification against the original component.

Fitment and Application for Civic

During comparison with the original lamp surround, confirm the vehicle market, check the vehicle build date, and verify the mounting side. At the workshop preparation stage, compare the installation direction, match the outer contour, and review market-version differences.

For replacement in the right front area, verify the mounting side, inspect the removed bezel, and compare every fixing tab. For a repeat wholesale order, check the nearby lamp opening, confirm the bumper position, and review facelift styling.

When separating nearby Civic variants, match the outer contour, compare the installation direction, and verify the mounting side. While reviewing the supplied photographs, check the vehicle build date, confirm the vehicle market, and inspect the removed bezel.

Front Right Fog Light Bezel Design and Replacement Notes

During an OE-led review for HD02008-056, review nearby cover openings, measure the original length, and review narrow bezel ends. During the physical comparison, check the bumper transition, compare the centre alignment, and compare the original edge profile.

For wholesale selection of 71116-TR3-A51, inspect the moulded face, check the bezel curvature, and review fastening slots. When checking the bumper opening, inspect reinforcement ribs, compare transferred hardware, and check the lamp interface.

Before sourcing this front right fog light bezel, review fastening slots, review the outer-edge shape, and review narrow bezel ends. At the workshop preparation stage, compare the original edge profile, inspect the back-side structure, and inspect the end geometry.

Application-Specific Identification Notes

For application-specific sourcing with 71116-TR3-A51 on the Civic 2014: review market-version differences. The HD02008-056 sample for the right side should compare mounting-hole height. For HONDA identification, 71116-TR3-A51 also requires technicians to inspect damaged mounting points. A buyer quoting HD02008-056 should check the ordered mounting side for the HONDA Civic 2014 order.

For application-specific sourcing with 71116-TR3-A51 on the Civic 2014: match the locating-slot layout. The HD02008-056 sample for the right side should inspect the moulded face. For HONDA identification, 71116-TR3-A51 also requires technicians to inspect each screw point. A buyer quoting HD02008-056 should confirm the required finish for the HONDA Civic 2014 order.

For application-specific sourcing with 71116-TR3-A51 on the Civic 2014: review market-version differences. The HD02008-056 sample for the right side should compare vent or grille openings. For HONDA identification, 71116-TR3-A51 also requires technicians to verify the lamp remains centred. A buyer quoting HD02008-056 should support the bezel during transit for the HONDA Civic 2014 order.

For application-specific sourcing with 71116-TR3-A51 on the Civic 2014: verify the mounting side. The HD02008-056 sample for the right side should inspect the back-side structure. For HONDA identification, 71116-TR3-A51 also requires technicians to retain the removed bezel for comparison. A buyer quoting HD02008-056 should send photographs of the removed part for the HONDA Civic 2014 order.

Installation Guidance

During comparison with the original lamp surround, align the lamp opening first, inspect damaged mounting points, and transfer reusable clips carefully. While checking adjacent body parts, check adjacent panel gaps, confirm every locator engages, and avoid bending moulded tabs.

For replacement in the right front area, retain the removed bezel for comparison, inspect the surrounding guides, and transfer reusable clips carefully. Before clips or hardware are transferred, review separate hardware needs, protect nearby painted surfaces, and check lamp-to-bezel clearance.

When separating nearby Civic variants, check the final perimeter, confirm the fitting direction, and retain the removed bezel for comparison. During the physical comparison, check adjacent panel gaps, align the lamp opening first, and support the bumper cover evenly.

Product Technical Specifications

Wholesale Supply and Packing

During an OE-led review for HD02008-056, compare the supplied photographs, request protective inner wrapping, and protect projecting locator tabs. Before packing the confirmed item, confirm separate clip requirements, confirm the delivery schedule, and request supported carton packing.

For wholesale selection of 71116-TR3-A51, confirm the delivery schedule, check the ordered mounting side, and confirm sample requirements. For a no-force trial fit, request supported carton packing, state the required quantity, and request export quotation terms.

Before sourcing this front right fog light bezel, confirm the required finish, request supported carton packing, and protect projecting locator tabs. While checking adjacent body parts, support the bezel during transit, inspect receiving condition, and retain the product label.

Frequently Asked Questions

Why must the left and right versions of 71116-TR3-A51 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Civic, review market-version differences, check the adjoining gap, verify the lamp remains centred, and retain the product label before installation or quotation.

Is workshop installation recommended for 71116-TR3-A51?

Yes. A workshop can inspect damaged bumper mounts on the Civic, align the lamp opening and avoid forcing a bezel intended for another trim level. For Civic, review market-version differences, inspect the end geometry, review separate hardware needs, and include the complete OE reference before installation or quotation.

Are mounting clips supplied with 71116-TR3-A51?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Civic, review market-version differences, compare vent or grille openings, avoid bending moulded tabs, and state the destination port before installation or quotation.

Does 71116-TR3-A51 include the complete lamp assembly?

No. This listing covers the pictured front right fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Civic, review market-version differences, check the lamp interface, trial-fit the bezel without force, and confirm separate clip requirements before installation or quotation.

How should 71116-TR3-A51 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Civic, review market-version differences, inspect reinforcement ribs, inspect the surrounding guides, and support the bezel during transit before installation or quotation.

Request a Quote

Send the complete OE reference 71116-TR3-A51, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.