71115-T6L-H00 Front Bumper Lip for HONDA Spirior 2015
Product: Front Bumper Lip
Primary OE: 71115-T6L-H00
Item code: HD02002-017
Cross-reference numbers:
71115-T6L-H00
Brand: HONDA
Model: Spirior
Application reference: 2015 HONDA Spirior
Position: Front
Verification: Approve this front cover only after the OE record, vehicle specification and mounting geometry agree.
Supply note: Reference HD02002-017 when discussing carton protection, labels, pallet rules and transport method.
71115-T6L-H00 is catalogued for body-shop enquiries that begin with an exact OE-number match. For 2015 HONDA Spirior, Yongshang Auto tracks the requested front bumper lip as HD02002-017.
HD02002-017 requires an application-specific review: The application record narrows the search, while final acceptance still depends on the exact vehicle configuration and original panel. The buyer can then connect the physical review to the supplier item record.
Repair-Shop Approval Sequence
Fitment guidance for 71115-T6L-H00. Use a photograph set that shows the entire old cover, both corners, the upper edge, the lower edge and every equipment opening. This allows the supplier to compare visible geometry instead of relying on a model name. This approach reduces dependence on exterior appearance alone.
The front location on 2015 HONDA Spirior should be reviewed as follows: Use a photograph set that shows the entire old cover, both corners, the upper edge, the lower edge and every equipment opening. This allows the supplier to compare visible geometry instead of relying on a model name. This sequence keeps catalogue selection separate from cosmetic preparation.
Product Technical Specifications
| Product type | Front Bumper Lip |
|---|---|
| Primary OE reference | 71115-T6L-H00 |
| Cross-reference numbers | 71115-T6L-H00 |
| Internal item code | HD02002-017 |
| Vehicle brand | HONDA |
| Vehicle model | Spirior |
| Model year | 2015 |
| Installation position | Front lower bumper area |
| Applicable vehicle | 2015 HONDA Spirior |
Exterior Panel Replacement Objective
Functional context for 71115-T6L-H00. This service part is commonly used in collision repair, refurbishment and wholesale replacement programmes. Its suitability still depends on the specific vehicle and equipment configuration. This review is especially useful near model-year or equipment transitions.
Application note for item HD02002-017. Replacement is intended to return the outer bumper area to its designed form. Structural crash components must be inspected independently and replaced when required. This review is especially useful near model-year or equipment transitions.
Panel Inspection Prior to Paint
Receiving note for carton HD02002-017. If the panel has been folded or closely packed for freight, follow the agreed recovery method and allow sufficient time before measuring the final contour. The purchase team can use the recorded result when confirming the order line.
Pre-finish check for 2015 HONDA Spirior. Check for transit pressure marks, edge distortion, scratches and incomplete apertures. Photograph any concern before sanding, drilling, trimming or painting changes the supplied condition. The purchase team can use the recorded result when confirming the order line.
Wholesale Enquiry Information
A quotation for 71115-T6L-H00 should reflect this guidance: Send a clear old-part photograph together with the vehicle application. This gives the commercial team a practical comparison record before confirming price and lead time. This sequence keeps catalogue selection separate from cosmetic preparation.
The 3 square images attached to HD02002-017 support visual review. Keep OE confirmation, photographs, sample findings and packing approval in one purchase file. This creates continuity from quotation through final receipt. This approach reduces dependence on exterior appearance alone.
Frequently Asked Questions
What should be compared before approving OE 71115-T6L-H00?
2015 HONDA Spirior is the stated reference for this page. Compare the new panel in an unpainted trial fit using serviceable vehicle-side brackets. Stop if gaps or mounting points require force. A dated photo record makes the decision easier to review if questions arise later.
Why is HD02002-017 useful on a mixed body-parts order?
Supplier-code context for this front bumper lip. Quote the item code on every revision of the enquiry. Traceable references reduce confusion when several front, rear, upper or lower covers are reviewed together. Keep HD02002-017 beside 71115-T6L-H00 in the final commercial record.
What geometry should be checked against the removed panel?
Panel-comparison guidance for 2015 HONDA Spirior. Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. The buyer can then connect the physical review to the supplier item record.
Which approvals should precede sanding or drilling?
Finishing guidance for OE 71115-T6L-H00. Release the lower-bumper component to paint only when the fitment record shows that OE data and physical comparison support the same application. The result should be recorded before commercial release of the requested quantity.
Which details are needed to quote OE 71115-T6L-H00 for wholesale supply?
Wholesale request for HD02002-017. State the required inspection record, sample-approval process and transport method. Large exterior panels need early agreement on protection and volume. This evidence belongs in the same approval file as the vehicle photographs.
Request a Quote for 71115-T6L-H00
If colours, mouldings or accessories are shown in reference photographs, clarify whether they are included. The listing describes the outer lower-bumper component unless a quotation states otherwise. For Yongshang Auto’s review, connect 71115-T6L-H00 and HD02002-017 with the intended 2015 HONDA Spirior, requested quantity and delivery market.
