71114-TVE-H00 Bumper Trim Molding for HONDA Accord 2018 Right
Primary OE reference: 71114-TVE-H00
Cross-reference number 1: 71114-TVE-H00
Cross-reference number 2: 71114TVEH00
Product: Bumper Trim Molding
Vehicle: HONDA Accord 2018
Installation area: Front
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-016
Fitment note: review the end profiles; check the vehicle build date; verify the mounting side before ordering 71114-TVE-H00
Product comparison: compare the original edge profile; inspect the moulding width; check the bumper interface against the removed bumper trim molding
Installation note: trial-fit without force; review the completed alignment; inspect every screw point on the Accord
Wholesale enquiry: support the moulding length; confirm the delivery schedule; check the ordered mounting side for HD02005-016
Application guidance: For HONDA Accord 2018, compare 71114-TVE-H00 with the complete outline of the removed bumper trim molding. Also match the stated body style, compare gloss or plating, protect painted panel edges, and request protective inner packing.
71114-TVE-H00 Bumper Trim Molding Product Overview
A sourcing check for HONDA Accord 2018 can use 71114-TVE-H00 to locate this bumper trim molding. The page states HD02005-016, right orientation and the practical details needed for product comparison.
For HONDA Accord 2018, compare 71114-TVE-H00 with the complete outline of the removed bumper trim molding. Also match the stated body style, compare gloss or plating, protect painted panel edges, and request protective inner packing.
Fitment and Application for Accord
When preparing a Accord exterior repair, confirm the installation position, match the original clip spacing, and inspect the original contour. Before final installation, review the end profiles, match the stated body style, and match the bumper outline.
During comparison with the original bumper trim, confirm the surface specification, compare the mounting direction, and confirm the production year. During receiving inspection, verify the mounting side, check nearby lamp openings, and match the bumper outline.
For a replacement on the right front area, confirm the production year, check nearby lamp openings, and review the end profiles. Before the quotation is confirmed, compare the complete OE number, compare every attachment point, and compare the removed trim.
Bumper Trim Molding Design and Replacement Notes
Before the removed component is discarded, compare the original length, check the bumper interface, and compare visible edge height. For a repeat wholesale order, review the outer-edge shape, compare the original edge profile, and check the moulding curvature.
During an OE-led check for HD02005-016, review the outer-edge shape, review the centre alignment, and compare gloss or plating. While reviewing the supplied photographs, inspect the back-side structure, review the outer-edge shape, and review the centre alignment.
For wholesale selection of 71114-TVE-H00, compare the end termination, compare the original length, and compare the original edge profile. Before final installation, compare gloss or plating, compare visible edge height, and compare the end termination.
For a direct comparison of 71114-TVE-H00, match the bumper outline, review nearby cover openings, align the centre first, and confirm the surface requirement. The bumper trim molding should match the original right front profile before it is installed or released for shipment.
Installation Guidance
When preparing a Accord exterior repair, review the completed alignment, support the trim evenly, and inspect damaged mounting points. When checking the visible exterior face, avoid bending long sections, confirm the fitting direction, and confirm an even seated fit.
During comparison with the original bumper trim, trial-fit without force, retain the removed component, and confirm an even seated fit. At the workshop preparation stage, trial-fit without force, retain the removed component, and confirm an even seated fit.
For a replacement on the right front area, avoid bending long sections, check lamp-cover clearance, and confirm the fitting direction. For a repeat wholesale order, review separate hardware needs, confirm an even seated fit, and inspect the surrounding guides.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71114-TVE-H00 |
| Cross-reference numbers | 71114-TVE-H00 71114TVEH00 |
| Internal item code | HD02005-016 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2018 |
| Installation area | Front |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Accord 2018 |
Wholesale Supply and Packing
Before the removed component is discarded, provide the delivery country, support the moulding length, and confirm separate accessory needs. Before clips or hardware are transferred, state the destination port, include the complete OE number, and retain the product label.
During an OE-led check for HD02005-016, support the moulding length, inspect the receiving condition, and retain the product label. During the physical comparison, confirm sample requirements, state the target application, and review carton edge protection.
For wholesale selection of 71114-TVE-H00, confirm separate accessory needs, request export quotation terms, and request protective inner packing. When checking the visible exterior face, include the complete OE number, support the moulding length, and state the target application.
When requesting HD02005-016, state OE reference 71114-TVE-H00, finish requirement verify against the original part, annual demand and shipment destination. The visible surface standard is best agreed with a physical or photographic sample.
Frequently Asked Questions
Can a photo alone verify 71114-TVE-H00?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71114-TVE-H00 and HD02005-016 with the removed part dimensions. For Accord, confirm the surface specification, compare the original edge profile, inspect every screw point, and confirm separate accessory needs before installation or quotation.
Is professional installation recommended for 71114-TVE-H00?
Yes. A workshop can dry-fit HD02005-016, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Accord, match the stated body style, review transferred hardware, align the centre first, and inspect the receiving condition before installation or quotation.
Can the opposite-side trim replace 71114-TVE-H00?
Normally no. The listing specification details the right orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For Accord, review market-specific styling, check the moulding curvature, confirm an even seated fit, and include the complete OE number before installation or quotation.
What product does OE 71114-TVE-H00 identify?
71114-TVE-H00 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Accord, match the original clip spacing, inspect the back-side structure, avoid bending long sections, and confirm the delivery schedule before installation or quotation.
How should the position of 71114-TVE-H00 be confirmed?
This listing specification details a right component for the front area. Compare the removed part, mounting direction and termination points before confirmation. For Accord, verify the mounting side, compare the end termination, support the trim evenly, and check the ordered mounting side before installation or quotation.
Request a Quote
Send the complete OE reference 71114-TVE-H00, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
