71110-TF0-000 Front Bumper Lip for HONDA Fit 2012
Product: Front Bumper Lip
Primary OE: 71110-TF0-000
Item code: HD02002-034
Cross-reference numbers:
71110-TF0-000
Brand: HONDA
Model: Fit
Application reference: 2012 HONDA Fit
Position: Front
Verification: Confirm that 71110-TF0-000 matches the intended 2012 HONDA Fit and verify the unpainted panel on the vehicle.
Supply note: Reference HD02002-034 when discussing carton protection, labels, pallet rules and transport method.
71110-TF0-000 supports replacement-panel purchasing when buyers need a traceable application reference. For 2012 HONDA Fit, Yongshang Auto tracks the requested front bumper lip as HD02002-034.
HD02002-034 requires an application-specific review: The quotation should state whether the request concerns a complete lower-bumper component, an upper section or a lower section to avoid an incorrect comparison. Those observations should remain available during sample and bulk-order review.
Compatibility Review for This Reference
Fitment guidance for 71110-TF0-000. Confirm whether the vehicle carries parking sensors, front camera equipment, headlamp washers, fog lamps, reflectors or special mouldings. Each feature can change the required holes, brackets or trim interfaces. The repairer should document the outcome before transferring trim components.
The front location on 2012 HONDA Fit should be reviewed as follows: Check that vehicle-side brackets, retainers and absorbers are serviceable. Damaged support parts can create an apparent fit problem that is not caused by the replacement lower-bumper component. This approach reduces dependence on exterior appearance alone.
Product Technical Specifications
| Product type | Front Bumper Lip |
|---|---|
| Primary OE reference | 71110-TF0-000 |
| Cross-reference numbers | 71110-TF0-000 |
| Internal item code | HD02002-034 |
| Vehicle brand | HONDA |
| Vehicle model | Fit |
| Model year | 2012 |
| Installation position | Front lower bumper area |
| Applicable vehicle | 2012 HONDA Fit |
Interface With Adjacent Components
Functional context for 71110-TF0-000. Its broad surface restores the visual continuity of the vehicle after damage. The repairer should evaluate waviness, edge condition and aperture shape during incoming inspection. Those observations should remain available during sample and bulk-order review.
Application note for item HD02002-034. The outer lower-bumper component contributes to styling and low-speed surface protection, but it is not a substitute for the reinforcement system. Buyers should quote each required assembly part separately. The repairer should document the outcome before transferring trim components.
Surface Review Before Refinishing
Receiving note for carton HD02002-034. Use clean gloves and padded supports during handling. Protecting the finish area reduces rework and keeps the inspection record clear for buyer and supplier. The result should be recorded before commercial release of the requested quantity.
Pre-finish check for 2012 HONDA Fit. Keep the panel wrapped until a clean inspection area is available. Dust, metal filings and nearby body-shop work can mark the visible surface before painting starts. Those observations should remain available during sample and bulk-order review.
Buyer Checklist for an Export Order
A quotation for 71110-TF0-000 should reflect this guidance: State whether the order is a sample, mixed-model shipment or repeat programme. bumper lips and lower valances are volume-sensitive, so carton and loading assumptions should be discussed before the freight quotation. The completed check supports a traceable discussion between buyer and supplier.
The 1 square image attached to HD02002-034 support visual review. Ask for pre-shipment photographs when the purchase programme requires packaging approval. The record should show item labels, carton condition and loading arrangement. The result should be recorded before commercial release of the requested quantity.
Frequently Asked Questions
Why must the workshop verify OE 71110-TF0-000?
2012 HONDA Fit is the stated reference for this page. Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. This evidence belongs in the same approval file as the vehicle photographs.
Which commercial record should show code HD02002-034?
Supplier-code context for this front bumper lip. Confirm the delivery market and preferred transport method. Packing design can differ between sample courier movement, consolidated sea freight and full-container supply. Keep HD02002-034 beside 71110-TF0-000 in the final commercial record.
Which hidden details can distinguish this lower-bumper component from a similar design?
Panel-comparison guidance for 2012 HONDA Fit. Request a full photographic record of the removed lower-bumper part and vehicle. Include labels, side retainers, upper fixings, lower mounts and all grille or lamp openings. That comparison gives the workshop a clearer basis for a pre-paint decision.
When can the body shop release this lower-bumper component to the paint area?
Finishing guidance for OE 71110-TF0-000. Release the lower-bumper component to paint only when the fitment record shows that OE data and physical comparison support the same application. The completed check supports a traceable discussion between buyer and supplier.
Which logistics details should be discussed with quantity?
Wholesale request for HD02002-034. State the required inspection record, sample-approval process and transport method. Large exterior panels need early agreement on protection and volume. A dated photo record makes the decision easier to review if questions arise later.
Request a Quote for 71110-TF0-000
Quote the item code on every revision of the enquiry. Traceable references reduce confusion when several front, rear, upper or lower covers are reviewed together. For Yongshang Auto’s review, connect 71110-TF0-000 and HD02002-034 with the intended 2012 HONDA Fit, requested quantity and delivery market.
