71109-3K0-H00 Bumper Corner Trim for HONDA Integra 2022
Primary OE reference: 71109-3K0-H00
Cross-reference number 1: 71109-3K0-H00
Cross-reference number 2: 711093K0H00
Product: Bumper Corner Trim
Vehicle: HONDA Integra 2022
Installation area: Front
Side / orientation: Unspecified
Surface detail: verify against the original part
Internal item code: HD02005-034
Fitment note: match the original clip spacing; check nearby lamp openings; compare every attachment point before ordering 71109-3K0-H00
Product comparison: inspect narrow moulding ends; review the outer-edge shape; review the surface texture against the removed bumper corner trim
Installation note: review the completed alignment; trial-fit without force; avoid bending long sections on the Integra
Wholesale enquiry: protect projecting locators; retain the product label; state the required quantity for HD02005-034
Application guidance: Selection for Integra should combine OE 71109-3K0-H00, body version and attachment geometry. Also check the vehicle build date, review the centre alignment, protect painted panel edges, and confirm sample requirements.
71109-3K0-H00 Bumper Corner Trim Product Overview
71109-3K0-H00 identifies this bumper corner trim for HONDA Integra 2022. Supplier reference HD02005-034 defines the unspecified application and helps buyers compare the correct exterior profile before ordering.
Selection for Integra should combine OE 71109-3K0-H00, body version and attachment geometry. Also check the vehicle build date, review the centre alignment, protect painted panel edges, and confirm sample requirements.
Fitment and Application for Integra
When separating nearby Integra trim variants, match the bumper outline, review the end profiles, and match the original clip spacing. Before packing the confirmed item, compare the complete OE number, review facelift differences, and compare every attachment point.
When comparing 71109-3K0-H00 with the removed part, match the original clip spacing, review facelift differences, and review market-specific styling. For a no-force trial fit, check adjacent garnish pieces, match the stated body style, and confirm the installation position.
For the listed 2022 application, review facelift differences, verify the mounting side, and inspect the original contour. While checking adjacent body parts, compare every attachment point, check nearby lamp openings, and confirm the installation position.
Bumper Corner Trim Design and Replacement Notes
Before sourcing this bumper corner trim for Integra, inspect the back-side structure, review the outer-edge shape, and review the centre alignment. During receiving inspection, compare gloss or plating, inspect the back-side structure, and review the outer-edge shape.
Before confirming this verify against the original part bumper corner trim, examine the visible finish, review the surface texture, and review nearby cover openings. Before the quotation is confirmed, review the centre alignment, review transferred hardware, and examine the visible finish.
For HONDA Integra 2022, inspect the fastening slots, compare gloss or plating, and review transferred hardware. Before packing the confirmed item, check the bumper interface, inspect the moulding width, and compare the original edge profile.
For a direct comparison of 71109-3K0-H00, compare every attachment point, compare visible edge height, check the final perimeter, and request protective inner packing. The bumper corner trim should match the original unspecified front profile before it is installed or released for shipment.
Installation Guidance
When separating nearby Integra trim variants, review the completed alignment, align the centre first, and check lamp-cover clearance. While reviewing the supplied photographs, review the completed alignment, align the centre first, and check lamp-cover clearance.
When comparing 71109-3K0-H00 with the removed part, trial-fit without force, inspect damaged mounting points, and check adjacent panel gaps. Before final installation, avoid bending long sections, check lamp-cover clearance, and confirm the fitting direction.
For the listed 2022 application, avoid bending long sections, protect painted panel edges, and inspect the surrounding guides. During receiving inspection, trial-fit without force, confirm locator engagement, and confirm the fitting direction.
Product Technical Specifications
| Product type | Bumper Corner Trim |
|---|---|
| Primary OE reference | 71109-3K0-H00 |
| Cross-reference numbers | 71109-3K0-H00 711093K0H00 |
| Internal item code | HD02005-034 |
| Vehicle brand | HONDA |
| Vehicle model | Integra |
| Model year | 2022 |
| Installation area | Front |
| Side / orientation | Unspecified |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Integra 2022 |
Wholesale Supply and Packing
Before sourcing this bumper corner trim for Integra, state the required quantity, provide the delivery country, and send original-part photographs. At the workshop preparation stage, include the complete OE number, confirm the surface requirement, and request supported carton packing.
Before confirming this verify against the original part bumper corner trim, protect projecting locators, confirm sample requirements, and compare the supplied photographs. For a repeat wholesale order, confirm the packing method, state the required quantity, and confirm the surface requirement.
For HONDA Integra 2022, review carton edge protection, state the destination port, and confirm the surface requirement. While reviewing the supplied photographs, state the target application, confirm the packing method, and include the complete OE number.
A useful RFQ for HD02005-034 identifies 71109-3K0-H00, the front installation area, the destination country and the planned order quantity. Include photos of the removed piece when fitment is still being reviewed.
Frequently Asked Questions
Does 71109-3K0-H00 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Integra, match the bumper outline, inspect the locator direction, trial-fit without force, and inspect the receiving condition before installation or quotation.
Is a model name alone enough to order 71109-3K0-H00?
No. The Integra name is useful for discovery, but OE number 71109-3K0-H00, VIN or build data, side, finish and physical attachment points should agree. For Integra, compare the mounting direction, compare the original length, check the final perimeter, and include the complete OE number before installation or quotation.
What should be inspected when 71109-3K0-H00 arrives?
Check the bumper corner trim part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For Integra, inspect the original contour, review the centre alignment, confirm locator engagement, and confirm the delivery schedule before installation or quotation.
What information is needed for a 71109-3K0-H00 quotation?
Send HONDA Integra 2022 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Integra, compare the removed trim, check the bumper interface, clean the mounting channel, and check the ordered mounting side before installation or quotation.
How should 71109-3K0-H00 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Integra, compare the complete OE number, inspect the fastening slots, confirm the fitting direction, and confirm sample requirements before installation or quotation.
Request a Quote
Send the complete OE reference 71109-3K0-H00, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
