71108-TEA-T10 Front Left Fog Light Bezel for HONDA Civic 2016

71108-TEA-T10 Front Left Fog Light Bezel Product Overview

The product shown under 71108-TEA-T10 is a front left fog light bezel intended for HONDA Civic 2016. Check the left orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Civic

For the listed 2016 application, confirm the surface finish, check the nearby lamp opening, and compare the full OE marking. At the workshop preparation stage, review the bezel orientation, compare every fixing tab, and inspect the lamp aperture size.

Before the removed bezel is discarded, compare the full OE marking, confirm the model year, and match the stated trim level. For a repeat wholesale order, review market-version differences, verify the mounting side, and inspect the removed bezel.

During an OE-led review for HD02008-057, compare every fixing tab, review the bezel orientation, and compare the full OE marking. While reviewing the supplied photographs, check the nearby lamp opening, confirm the surface finish, and confirm the model year.

Front Left Fog Light Bezel Design and Replacement Notes

For HONDA Civic 2016, review fastening slots, check the bezel curvature, and inspect the moulded face. During the physical comparison, review the outer-edge shape, review nearby cover openings, and measure the original length.

When preparing a Civic bumper repair, compare transferred hardware, check the lamp interface, and inspect the frame width. When checking the bumper opening, compare vent or grille openings, review locator direction, and inspect the end geometry.

During comparison with the original lamp surround, inspect the frame width, inspect reinforcement ribs, and inspect the moulded face. At the workshop preparation stage, measure the original length, compare the centre alignment, and compare mounting-hole height.

Application-Specific Identification Notes

A trim-level comparison requires with 71108-TEA-T10 on the Civic 2016: inspect the lamp aperture size. The HD02008-057 sample for the left side should check the bezel curvature. For HONDA identification, 71108-TEA-T10 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-057 should confirm separate clip requirements for the HONDA Civic 2016 order.

For application-specific sourcing with 71108-TEA-T10 on the Civic 2016: confirm the surface finish. The HD02008-057 sample for the left side should inspect the moulded face. For HONDA identification, 71108-TEA-T10 also requires technicians to review the completed alignment. A buyer quoting HD02008-057 should state annual purchasing volume for the HONDA Civic 2016 order.

A vehicle-side comparison starts with 71108-TEA-T10 on the Civic 2016: review market-version differences. The HD02008-057 sample for the left side should measure the original length. For HONDA identification, 71108-TEA-T10 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-057 should state the target vehicle for the HONDA Civic 2016 order.

Before workshop installation with 71108-TEA-T10 on the Civic 2016: compare every fixing tab. The HD02008-057 sample for the left side should confirm decorative finish details. For HONDA identification, 71108-TEA-T10 also requires technicians to clean the bumper mounting area. A buyer quoting HD02008-057 should confirm the delivery schedule for the HONDA Civic 2016 order.

Installation Guidance

For the listed 2016 application, check the final perimeter, confirm an evenly seated fit, and review the completed alignment. While checking adjacent body parts, inspect the surrounding guides, confirm the finished bumper gap, and verify the lamp remains centred.

Before the removed bezel is discarded, clean the bumper mounting area, avoid bending moulded tabs, and review the completed alignment. Before clips or hardware are transferred, inspect damaged mounting points, protect exposed panel edges, and support the bumper cover evenly.

During an OE-led review for HD02008-057, transfer reusable clips carefully, trial-fit the bezel without force, and clean the bumper mounting area. During the physical comparison, inspect the surrounding guides, check the final perimeter, and confirm the fitting direction.

Product Technical Specifications

Wholesale Supply and Packing

For HONDA Civic 2016, confirm the required finish, state the target vehicle, and confirm the packing method. Before packing the confirmed item, include the complete OE reference, confirm sample requirements, and request export quotation terms.

When preparing a Civic bumper repair, confirm sample requirements, request supported carton packing, and state the required quantity. For a no-force trial fit, request export quotation terms, review carton edge protection, and support the bezel during transit.

During comparison with the original lamp surround, state annual purchasing volume, request export quotation terms, and confirm the packing method. While checking adjacent body parts, state the destination port, confirm the delivery schedule, and request protective inner wrapping.

Frequently Asked Questions

Why must the left and right versions of 71108-TEA-T10 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Civic, confirm the model year, check the adjoining gap, inspect damaged mounting points, and request protective inner wrapping before installation or quotation.

Is workshop installation recommended for 71108-TEA-T10?

Yes. A workshop can inspect damaged bumper mounts on the Civic, align the lamp opening and avoid forcing a bezel intended for another trim level. For Civic, review market-version differences, review the outer-edge shape, confirm the fitting direction, and support the bezel during transit before installation or quotation.

Are mounting clips supplied with 71108-TEA-T10?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Civic, inspect the removed bezel, inspect the end geometry, verify the lamp remains centred, and check the ordered mounting side before installation or quotation.

Does 71108-TEA-T10 include the complete lamp assembly?

No. This listing covers the pictured front left fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Civic, check the nearby lamp opening, measure the original length, check adjacent panel gaps, and provide the delivery country before installation or quotation.

How should 71108-TEA-T10 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Civic, review facelift styling, compare vent or grille openings, review separate hardware needs, and retain the product label before installation or quotation.

Request a Quote

Send the complete OE reference 71108-TEA-T10, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.