71108-T6L-H01 Front Left Fog Light Bezel for HONDA Spirior 2015

71108-T6L-H01 Front Left Fog Light Bezel Product Overview

This product page presents 71108-T6L-H01 for buyers comparing a front left fog light bezel for HONDA Spirior 2015. Check the left orientation, lamp opening, mounting tabs and standard-specification specification against the original component.

Fitment and Application for Spirior

When comparing 71108-T6L-H01 with the removed bezel, inspect the lamp aperture size, compare the full OE marking, and confirm the model year. Before final installation, match the stated trim level, review market-version differences, and verify the mounting side.

For the listed 2015 application, inspect the removed bezel, compare the original grille section, and inspect the lamp aperture size. During receiving inspection, compare every fixing tab, review the bezel orientation, and compare the full OE marking.

Before the removed bezel is discarded, check the vehicle build date, confirm the bumper position, and inspect the removed bezel. Before the quotation is confirmed, match the stated trim level, inspect the lamp aperture size, and match the locating-slot layout.

Front Left Fog Light Bezel Design and Replacement Notes

Before confirming this fog light bezel, check the lamp interface, inspect the frame width, and compare vent or grille openings. For a repeat wholesale order, review locator direction, inspect the end geometry, and compare the surface texture.

For HONDA Spirior 2015, compare vent or grille openings, compare transferred hardware, and check the bezel curvature. While reviewing the supplied photographs, review nearby cover openings, check the bumper transition, and confirm decorative finish details.

When preparing a Spirior bumper repair, inspect the end geometry, compare the centre alignment, and check the bezel curvature. Before final installation, review locator direction, compare the original edge profile, and inspect the moulded face.

Application-Specific Identification Notes

A trim-level comparison requires with 71108-T6L-H01 on the Spirior 2015: check the vehicle build date. The HD02008-045 sample for the left side should check the lamp interface. For HONDA identification, 71108-T6L-H01 also requires technicians to check adjacent panel gaps. A buyer quoting HD02008-045 should request protective inner wrapping for the HONDA Spirior 2015 order.

For application-specific sourcing with 71108-T6L-H01 on the Spirior 2015: match the outer contour. The HD02008-045 sample for the left side should inspect the moulded face. For HONDA identification, 71108-T6L-H01 also requires technicians to check the final perimeter. A buyer quoting HD02008-045 should review carton edge protection for the HONDA Spirior 2015 order.

A vehicle-side comparison starts with 71108-T6L-H01 on the Spirior 2015: review market-version differences. The HD02008-045 sample for the left side should compare the original edge profile. For HONDA identification, 71108-T6L-H01 also requires technicians to inspect damaged mounting points. A buyer quoting HD02008-045 should request export quotation terms for the HONDA Spirior 2015 order.

Before workshop installation with 71108-T6L-H01 on the Spirior 2015: match the outer contour. The HD02008-045 sample for the left side should inspect the frame width. For HONDA identification, 71108-T6L-H01 also requires technicians to review the completed alignment. A buyer quoting HD02008-045 should compare the supplied photographs for the HONDA Spirior 2015 order.

Installation Guidance

When comparing 71108-T6L-H01 with the removed bezel, trial-fit the bezel without force, inspect each screw point, and verify the lamp remains centred. When checking the bumper opening, confirm every locator engages, confirm an evenly seated fit, and align the lamp opening first.

For the listed 2015 application, avoid bending moulded tabs, transfer reusable clips carefully, and trial-fit the bezel without force. At the workshop preparation stage, clean the bumper mounting area, inspect the surrounding guides, and check the final perimeter.

Before the removed bezel is discarded, review separate hardware needs, review the completed alignment, and verify the lamp remains centred. For a repeat wholesale order, protect nearby painted surfaces, inspect damaged mounting points, and confirm every locator engages.

Product Technical Specifications

Wholesale Supply and Packing

Before confirming this fog light bezel, confirm separate clip requirements, inspect receiving condition, and include the complete OE reference. Before clips or hardware are transferred, confirm the delivery schedule, check the ordered mounting side, and confirm sample requirements.

For HONDA Spirior 2015, state the destination port, confirm the delivery schedule, and request protective inner wrapping. During the physical comparison, state the required quantity, provide the delivery country, and send photographs of the removed part.

When preparing a Spirior bumper repair, include the complete OE reference, review carton edge protection, and request protective inner wrapping. When checking the bumper opening, inspect receiving condition, request export quotation terms, and confirm the required finish.

Frequently Asked Questions

How should 71108-T6L-H01 be compared before installation?

Compare the complete OE number, outer contour, lamp opening, locating tabs, screw points and surface finish with the removed component before tightening hardware. For Spirior, compare the installation direction, check the adjoining gap, trial-fit the bezel without force, and request export quotation terms before installation or quotation.

What should be inspected when 71108-T6L-H01 arrives?

Check the label, contour, surface finish, lamp aperture, tabs, mounting points and carton condition before installation or disposal of the packaging. For Spirior, review market-version differences, check the bumper transition, verify the lamp remains centred, and confirm separate clip requirements before installation or quotation.

Where is 71108-T6L-H01 installed?

The listed front left fog light bezel belongs in the left front bumper area. An opposite-side or different-trim bezel may use another outline and tab arrangement. For Spirior, review facelift styling, check the bezel curvature, confirm an evenly seated fit, and retain the product label before installation or quotation.

What details should accompany a 71108-T6L-H01 quotation request?

Send the complete OE reference, vehicle information, mounting side, original-part photographs, quantity and destination so the application can be reviewed. For Spirior, check adjacent bumper parts, compare vent or grille openings, confirm the fitting direction, and request supported carton packing before installation or quotation.

Why must the left and right versions of 71108-T6L-H01 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Spirior, confirm the model year, compare mounting-hole height, avoid bending moulded tabs, and provide the delivery country before installation or quotation.

Request a Quote

Send the complete OE reference 71108-T6L-H01, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.