71108-SWA-000 Bumper Trim Molding for HONDA CR-V 2007 Left

71108-SWA-000 Bumper Trim Molding Product Overview

For exterior line HD02005-061, the principal OE reference is 71108-SWA-000. It is listed for HONDA CR-V 2007 and should be approved from the number, vehicle data and front mounting geometry together.

For an export quotation, identify 71108-SWA-000, HONDA CR-V 2007 and the required mounting side. Also check the vehicle build date, review the outer-edge shape, clean the mounting channel, and request protective inner packing.

Fitment and Application for CR-V

For a replacement on the left front area, match the bumper outline, match the original clip spacing, and review facelift differences. Before clips or hardware are transferred, review market-specific styling, check adjacent garnish pieces, and match the stated body style.

When separating nearby CR-V trim variants, match the original clip spacing, compare the mounting direction, and confirm the vehicle market. During the physical comparison, compare the complete OE number, confirm the production year, and match the stated body style.

When comparing 71108-SWA-000 with the removed part, review facelift differences, check nearby lamp openings, and check the vehicle build date. When checking the visible exterior face, check adjacent garnish pieces, compare the complete OE number, and verify the mounting side.

Bumper Trim Molding Design and Replacement Notes

For wholesale selection of 71108-SWA-000, check the panel transition, check the bumper interface, and check the moulding curvature. For a no-force trial fit, check the adjoining gap, review the outer-edge shape, and check the panel transition.

Before sourcing this bumper trim molding for CR-V, compare the original length, review nearby cover openings, and review the outer-edge shape. While checking adjacent body parts, inspect the locator direction, compare the end termination, and review the surface texture.

Before confirming this verify against the original part bumper trim molding, review the outer-edge shape, compare the end termination, and check the adjoining gap. Before clips or hardware are transferred, compare visible edge height, check the moulding curvature, and compare gloss or plating.

For a direct comparison of 71108-SWA-000, compare every attachment point, inspect narrow moulding ends, review separate hardware needs, and confirm the surface requirement. The bumper trim molding should match the original left front profile before it is installed or released for shipment.

Installation Guidance

For a replacement on the left front area, align the centre first, transfer reusable clips carefully, and confirm locator engagement. Before the quotation is confirmed, retain the removed component, inspect every screw point, and protect painted panel edges.

When separating nearby CR-V trim variants, retain the removed component, review separate hardware needs, and confirm the final trim gap. Before packing the confirmed item, align the centre first, avoid bending long sections, and protect painted panel edges.

When comparing 71108-SWA-000 with the removed part, check the final perimeter, trial-fit without force, and check lamp-cover clearance. For a no-force trial fit, inspect the surrounding guides, transfer reusable clips carefully, and protect painted panel edges.

Product Technical Specifications

Wholesale Supply and Packing

For wholesale selection of 71108-SWA-000, provide the delivery country, request supported carton packing, and retain the product label. Before final installation, confirm separate accessory needs, request export quotation terms, and request protective inner packing.

Before sourcing this bumper trim molding for CR-V, support the moulding length, compare the supplied photographs, and request protective inner packing. During receiving inspection, protect projecting locators, confirm separate accessory needs, and confirm the delivery schedule.

Before confirming this verify against the original part bumper trim molding, confirm separate accessory needs, check the ordered mounting side, and request export quotation terms. Before the quotation is confirmed, state the destination port, request protective inner packing, and provide the delivery country.

For repeat purchasing of 71108-SWA-000, retain the approved CR-V sample under supplier code HD02005-061. specification details revision dates whenever the vehicle application, finish or packaging specification changes.

Frequently Asked Questions

What product does OE 71108-SWA-000 identify?

71108-SWA-000 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For CR-V, match the bumper outline, check the bumper interface, protect the visible surface, and confirm separate accessory needs before installation or quotation.

How should the position of 71108-SWA-000 be confirmed?

This listing specification details a left component for the front area. Compare the removed part, mounting direction and termination points before confirmation. For CR-V, compare the mounting direction, inspect the fastening slots, review separate hardware needs, and inspect the receiving condition before installation or quotation.

Why should supplier code HD02005-061 stay on the enquiry?

HD02005-061 connects the 71108-SWA-000 fitment review, quotation, sample and receiving specification details. Keeping it on every revision reduces the risk of mixing similar trim pieces. For CR-V, inspect the original contour, compare visible edge height, check adjacent panel gaps, and include the complete OE number before installation or quotation.

Can a photo alone verify 71108-SWA-000?

A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71108-SWA-000 and HD02005-061 with the removed part dimensions. For CR-V, compare the removed trim, review the surface texture, confirm the final trim gap, and confirm the delivery schedule before installation or quotation.

Is professional installation recommended for 71108-SWA-000?

Yes. A workshop can dry-fit HD02005-061, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For CR-V, compare the complete OE number, review the outer-edge shape, inspect every screw point, and check the ordered mounting side before installation or quotation.

Request a Quote

Send the complete OE reference 71108-SWA-000, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.