71107-T9A-H50 Front Left Fog Light Bezel for HONDA City 2019

71107-T9A-H50 Front Left Fog Light Bezel Product Overview

This product page presents 71107-T9A-H50 for buyers comparing a front left fog light bezel for HONDA City 2019. Check the left orientation, lamp opening, mounting tabs and high-specification specification against the original component.

Fitment and Application for City

When comparing 71107-T9A-H50 with the removed bezel, inspect the lamp aperture size, confirm the bumper position, and compare the installation direction. Before final installation, compare every fixing tab, check adjacent bumper parts, and verify the mounting side.

For the listed 2019 application, inspect the removed bezel, verify the mounting side, and review market-version differences. During receiving inspection, match the stated trim level, confirm the model year, and compare the full OE marking.

Before the removed bezel is discarded, check the vehicle build date, confirm the surface finish, and compare the installation direction. Before the quotation is confirmed, compare the full OE marking, review market-version differences, and compare every fixing tab.

Front Left Fog Light Bezel Design and Replacement Notes

Before confirming this fog light bezel, compare mounting-hole height, compare transferred hardware, and check the bumper transition. For a repeat wholesale order, review locator direction, review the outer-edge shape, and inspect the back-side structure.

For HONDA City 2019, compare the original edge profile, review locator direction, and check the bezel curvature. While reviewing the supplied photographs, compare the centre alignment, inspect the end geometry, and review fastening slots.

When preparing a City bumper repair, check the bumper transition, review nearby cover openings, and check the bezel curvature. Before final installation, compare transferred hardware, compare vent or grille openings, and compare the surface texture.

Application-Specific Identification Notes

A trim-level comparison requires with 71107-T9A-H50 on the City 2019: inspect the lamp aperture size. The HD02008-123 sample for the left side should measure the original length. For HONDA identification, 71107-T9A-H50 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-123 should request supported carton packing for the HONDA City 2019 order.

For application-specific sourcing with 71107-T9A-H50 on the City 2019: confirm the surface finish. The HD02008-123 sample for the left side should inspect the moulded face. For HONDA identification, 71107-T9A-H50 also requires technicians to confirm the finished bumper gap. A buyer quoting HD02008-123 should confirm the delivery schedule for the HONDA City 2019 order.

A vehicle-side comparison starts with 71107-T9A-H50 on the City 2019: review market-version differences. The HD02008-123 sample for the left side should check the bezel curvature. For HONDA identification, 71107-T9A-H50 also requires technicians to check lamp-to-bezel clearance. A buyer quoting HD02008-123 should request supported carton packing for the HONDA City 2019 order.

Before workshop installation with 71107-T9A-H50 on the City 2019: compare every fixing tab. The HD02008-123 sample for the left side should inspect the moulded face. For HONDA identification, 71107-T9A-H50 also requires technicians to align the lamp opening first. A buyer quoting HD02008-123 should confirm the required finish for the HONDA City 2019 order.

Installation Guidance

When comparing 71107-T9A-H50 with the removed bezel, inspect damaged mounting points, align the lamp opening first, and trial-fit the bezel without force. When checking the bumper opening, protect nearby painted surfaces, support the bumper cover evenly, and clean the bumper mounting area.

For the listed 2019 application, check lamp-to-bezel clearance, review the completed alignment, and trial-fit the bezel without force. At the workshop preparation stage, retain the removed bezel for comparison, confirm an evenly seated fit, and protect nearby painted surfaces.

Before the removed bezel is discarded, confirm an evenly seated fit, inspect each screw point, and check adjacent panel gaps. For a repeat wholesale order, protect nearby painted surfaces, inspect the surrounding guides, and protect exposed panel edges.

Product Technical Specifications

Wholesale Supply and Packing

Before confirming this fog light bezel, check the ordered mounting side, confirm the packing method, and request protective inner wrapping. Before clips or hardware are transferred, send photographs of the removed part, request supported carton packing, and inspect receiving condition.

For HONDA City 2019, request protective inner wrapping, review carton edge protection, and include the complete OE reference. During the physical comparison, state annual purchasing volume, support the bezel during transit, and confirm the delivery schedule.

When preparing a City bumper repair, request supported carton packing, confirm the required finish, and include the complete OE reference. When checking the bumper opening, send photographs of the removed part, provide the delivery country, and state the required quantity.

Frequently Asked Questions

Are mounting clips supplied with 71107-T9A-H50?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For City, confirm the model year, check the adjoining gap, check adjacent panel gaps, and include the complete OE reference before installation or quotation.

Does 71107-T9A-H50 include the complete lamp assembly?

No. This listing covers the pictured front left fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For City, review market-version differences, inspect reinforcement ribs, inspect damaged mounting points, and provide the delivery country before installation or quotation.

How should 71107-T9A-H50 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For City, inspect the removed bezel, check the bumper transition, trial-fit the bezel without force, and request protective inner wrapping before installation or quotation.

What vehicle application is listed for 71107-T9A-H50?

71107-T9A-H50 is presented for HONDA City 2019. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For City, check the nearby lamp opening, inspect the end geometry, support the bumper cover evenly, and state the destination port before installation or quotation.

Can photographs alone confirm 71107-T9A-H50 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For City, review facelift styling, check the bezel curvature, verify the lamp remains centred, and request export quotation terms before installation or quotation.

Request a Quote

Send the complete OE reference 71107-T9A-H50, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.