71107-T2J-H70 Front Left Fog Light Bezel for HONDA Accord 2016

71107-T2J-H70 Front Left Fog Light Bezel Product Overview

The product shown under 71107-T2J-H70 is a front left fog light bezel intended for HONDA Accord 2016. Check the left orientation, lamp opening, mounting tabs and standard-specification specification against the original component.

Fitment and Application for Accord

Before confirming this fog light bezel, confirm the model year, confirm the vehicle market, and check adjacent bumper parts. Before clips or hardware are transferred, compare the original grille section, review facelift styling, and compare every fixing tab.

For HONDA Accord 2016, check the nearby lamp opening, confirm the bumper position, and review facelift styling. During the physical comparison, match the outer contour, check the vehicle build date, and compare the original grille section.

When preparing a Accord bumper repair, review the bezel orientation, match the stated trim level, and check the vehicle build date. When checking the bumper opening, compare the full OE marking, review facelift styling, and confirm the vehicle market.

Front Left Fog Light Bezel Design and Replacement Notes

When comparing 71107-T2J-H70 with the removed bezel, measure the original length, compare transferred hardware, and check the adjoining gap. For a no-force trial fit, review narrow bezel ends, inspect reinforcement ribs, and compare the surface texture.

For the listed 2016 application, review the outer-edge shape, compare the centre alignment, and check the adjoining gap. While checking adjacent body parts, inspect the frame width, check the bezel curvature, and review narrow bezel ends.

Before the removed bezel is discarded, check the bezel curvature, confirm decorative finish details, and check the lamp interface. Before clips or hardware are transferred, review narrow bezel ends, inspect the end geometry, and inspect the moulded face.

Application-Specific Identification Notes

For an export quotation with 71107-T2J-H70 on the Accord 2016: inspect the lamp aperture size. The HD02008-007 sample for the left side should compare vent or grille openings. For HONDA identification, 71107-T2J-H70 also requires technicians to support the bumper cover evenly. A buyer quoting HD02008-007 should include the complete OE reference for the HONDA Accord 2016 order.

For application-specific sourcing with 71107-T2J-H70 on the Accord 2016: review facelift styling. The HD02008-007 sample for the left side should check the adjoining gap. For HONDA identification, 71107-T2J-H70 also requires technicians to review separate hardware needs. A buyer quoting HD02008-007 should request protective inner wrapping for the HONDA Accord 2016 order.

OE selection begins with 71107-T2J-H70 on the Accord 2016: review the bezel orientation. The HD02008-007 sample for the left side should compare mounting-hole height. For HONDA identification, 71107-T2J-H70 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-007 should retain the product label for the HONDA Accord 2016 order.

A trim-level comparison requires with 71107-T2J-H70 on the Accord 2016: check the vehicle build date. The HD02008-007 sample for the left side should compare mounting-hole height. For HONDA identification, 71107-T2J-H70 also requires technicians to inspect damaged mounting points. A buyer quoting HD02008-007 should state the target vehicle for the HONDA Accord 2016 order.

Installation Guidance

Before confirming this fog light bezel, support the bumper cover evenly, align the lamp opening first, and check adjacent panel gaps. Before the quotation is confirmed, retain the removed bezel for comparison, confirm the fitting direction, and check the final perimeter.

For HONDA Accord 2016, check adjacent panel gaps, confirm the finished bumper gap, and check lamp-to-bezel clearance. Before packing the confirmed item, protect nearby painted surfaces, review separate hardware needs, and transfer reusable clips carefully.

When preparing a Accord bumper repair, confirm the fitting direction, inspect each screw point, and check lamp-to-bezel clearance. For a no-force trial fit, retain the removed bezel for comparison, avoid bending moulded tabs, and confirm every locator engages.

Product Technical Specifications

Wholesale Supply and Packing

When comparing 71107-T2J-H70 with the removed bezel, state the target vehicle, confirm the delivery schedule, and support the bezel during transit. Before final installation, state annual purchasing volume, include the complete OE reference, and review carton edge protection.

For the listed 2016 application, request export quotation terms, compare the supplied photographs, and state the target vehicle. During receiving inspection, inspect receiving condition, request supported carton packing, and send photographs of the removed part.

Before the removed bezel is discarded, provide the delivery country, confirm the required finish, and support the bezel during transit. Before the quotation is confirmed, confirm sample requirements, confirm separate clip requirements, and state annual purchasing volume.

Frequently Asked Questions

What should be inspected when 71107-T2J-H70 arrives?

Check the label, contour, surface finish, lamp aperture, tabs, mounting points and carton condition before installation or disposal of the packaging. For Accord, match the locating-slot layout, inspect the moulded face, protect nearby painted surfaces, and confirm the required finish before installation or quotation.

Where is 71107-T2J-H70 installed?

The listed front left fog light bezel belongs in the left front bumper area. An opposite-side or different-trim bezel may use another outline and tab arrangement. For Accord, review the bezel orientation, compare the original edge profile, trial-fit the bezel without force, and request supported carton packing before installation or quotation.

What details should accompany a 71107-T2J-H70 quotation request?

Send the complete OE reference, vehicle information, mounting side, original-part photographs, quantity and destination so the application can be reviewed. For Accord, match the outer contour, review locator direction, align the lamp opening first, and protect projecting locator tabs before installation or quotation.

Why must the left and right versions of 71107-T2J-H70 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Accord, check the nearby lamp opening, check the bezel curvature, inspect damaged mounting points, and support the bezel during transit before installation or quotation.

Is workshop installation recommended for 71107-T2J-H70?

Yes. A workshop can inspect damaged bumper mounts on the Accord, align the lamp opening and avoid forcing a bezel intended for another trim level. For Accord, verify the mounting side, compare the centre alignment, transfer reusable clips carefully, and inspect receiving condition before installation or quotation.

Request a Quote

Send the complete OE reference 71107-T2J-H70, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.