71106-TC4-H00 Bumper Molding Trim for HONDA XR-V 2020 Left
Primary OE reference: 71106-TC4-H00
Cross-reference number 1: 71106-TC4-H00
Cross-reference number 2: 71106TC4H00
Product: Bumper Molding Trim
Vehicle: HONDA XR-V 2020
Installation area: Front
Side / orientation: Left
Surface detail: paint-ready / painted specification; bright-finish
Internal item code: HD02005-123
Fitment note: compare every attachment point; confirm the surface specification; compare the removed trim before ordering 71106-TC4-H00
Product comparison: check the adjoining gap; review the surface texture; compare the end termination against the removed bumper molding trim
Installation note: support the trim evenly; transfer reusable clips carefully; check lamp-cover clearance on the XR-V
Wholesale enquiry: request supported carton packing; confirm the delivery schedule; support the moulding length for HD02005-123
Application guidance: The paint-ready / painted specification; bright-finish bumper molding trim belongs to the front area of HONDA XR-V 2020. Also compare the complete OE number, review the outer-edge shape, check adjacent panel gaps, and request protective inner packing.
71106-TC4-H00 Bumper Molding Trim Product Overview
71106-TC4-H00 identifies this bumper molding trim for HONDA XR-V 2020. Supplier reference HD02005-123 defines the left application and helps buyers compare the correct exterior profile before ordering.
The paint-ready / painted specification; bright-finish bumper molding trim belongs to the front area of HONDA XR-V 2020. Also compare the complete OE number, review the outer-edge shape, check adjacent panel gaps, and request protective inner packing.
Fitment and Application for XR-V
When separating nearby XR-V trim variants, verify the mounting side, check nearby lamp openings, and match the bumper outline. Before packing the confirmed item, review the end profiles, match the original clip spacing, and compare the complete OE number.
When comparing 71106-TC4-H00 with the removed part, match the bumper outline, match the original clip spacing, and review facelift differences. For a no-force trial fit, review market-specific styling, check adjacent garnish pieces, and match the stated body style.
For the listed 2020 application, match the original clip spacing, compare the mounting direction, and confirm the vehicle market. While checking adjacent body parts, compare the complete OE number, confirm the production year, and match the stated body style.
Bumper Molding Trim Design and Replacement Notes
Before sourcing this bumper molding trim for XR-V, inspect narrow moulding ends, check the bumper interface, and examine the visible finish. During receiving inspection, compare the end termination, inspect narrow moulding ends, and check the bumper interface.
Before confirming this paint-ready / painted specification; bright-finish bumper molding trim, review nearby cover openings, review the centre alignment, and review transferred hardware. Before the quotation is confirmed, examine the visible finish, review the surface texture, and review nearby cover openings.
For HONDA XR-V 2020, inspect the locator direction, compare the end termination, and review the surface texture. Before packing the confirmed item, check the adjoining gap, inspect the back-side structure, and compare visible edge height.
For a direct comparison of 71106-TC4-H00, review the end profiles, inspect the fastening slots, confirm locator engagement, and state annual purchasing volume. The bumper molding trim should match the original left front profile before it is installed or released for shipment.
Installation Guidance
When separating nearby XR-V trim variants, review the completed alignment, align the centre first, and check lamp-cover clearance. While reviewing the supplied photographs, review the completed alignment, align the centre first, and check lamp-cover clearance.
When comparing 71106-TC4-H00 with the removed part, trial-fit without force, inspect damaged mounting points, and check adjacent panel gaps. Before final installation, avoid bending long sections, check lamp-cover clearance, and confirm the fitting direction.
For the listed 2020 application, avoid bending long sections, protect painted panel edges, and inspect the surrounding guides. During receiving inspection, trial-fit without force, confirm locator engagement, and confirm the fitting direction.
Product Technical Specifications
| Product type | Bumper Molding Trim |
|---|---|
| Primary OE reference | 71106-TC4-H00 |
| Cross-reference numbers | 71106-TC4-H00 71106TC4H00 |
| Internal item code | HD02005-123 |
| Vehicle brand | HONDA |
| Vehicle model | XR-V |
| Model year | 2020 |
| Installation area | Front |
| Side / orientation | Left |
| Surface detail | paint-ready / painted specification; bright-finish |
| Applicable vehicle | HONDA XR-V 2020 |
Wholesale Supply and Packing
Before sourcing this bumper molding trim for XR-V, protect projecting locators, support the moulding length, and inspect the receiving condition. At the workshop preparation stage, retain the product label, confirm sample requirements, and state the target application.
Before confirming this paint-ready / painted specification; bright-finish bumper molding trim, review carton edge protection, state annual purchasing volume, and confirm the delivery schedule. For a repeat wholesale order, send original-part photographs, protect projecting locators, and confirm sample requirements.
For HONDA XR-V 2020, confirm the packing method, include the complete OE number, and confirm sample requirements. While reviewing the supplied photographs, request export quotation terms, send original-part photographs, and retain the product label.
A useful RFQ for HD02005-123 identifies 71106-TC4-H00, the front installation area, the destination country and the planned order quantity. Include photos of the removed piece when fitment is still being reviewed.
Frequently Asked Questions
Does 71106-TC4-H00 have a fixed surface finish?
The source detail is paint-ready / painted specification; bright-finish. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For XR-V, review facelift differences, inspect the moulding width, transfer reusable clips carefully, and state annual purchasing volume before installation or quotation.
Is a model name alone enough to order 71106-TC4-H00?
No. The XR-V name is useful for discovery, but OE number 71106-TC4-H00, VIN or build data, side, finish and physical attachment points should agree. For XR-V, match the bumper outline, compare gloss or plating, inspect the surrounding guides, and state the target application before installation or quotation.
What should be inspected when 71106-TC4-H00 arrives?
Check the bumper molding trim part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For XR-V, compare the mounting direction, examine the visible finish, check lamp-cover clearance, and protect projecting locators before installation or quotation.
What information is needed for a 71106-TC4-H00 quotation?
Send HONDA XR-V 2020 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For XR-V, inspect the original contour, check the adjoining gap, trial-fit without force, and provide the delivery country before installation or quotation.
How should 71106-TC4-H00 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the paint-ready / painted specification; bright-finish surface. Packaging confirmation is useful for repeat wholesale orders. For XR-V, compare the removed trim, inspect the locator direction, check the final perimeter, and confirm the packing method before installation or quotation.
Request a Quote
Send the complete OE reference 71106-TC4-H00, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
