71103-TEA-T10 Front Right Fog Light Bezel for HONDA Civic 2016

71103-TEA-T10 Front Right Fog Light Bezel Product Overview

This product page presents 71103-TEA-T10 for buyers comparing a front right fog light bezel for HONDA Civic 2016. Check the right orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Civic

When preparing a Civic bumper repair, check the nearby lamp opening, match the locating-slot layout, and inspect the removed bezel. Before final installation, confirm the surface finish, review market-version differences, and compare the original grille section.

During comparison with the original lamp surround, review the bezel orientation, compare the original grille section, and check the vehicle build date. During receiving inspection, match the outer contour, review facelift styling, and confirm the bumper position.

For replacement in the right front area, inspect the lamp aperture size, match the stated trim level, and inspect the removed bezel. Before the quotation is confirmed, confirm the bumper position, check the vehicle build date, and confirm the surface finish.

Front Right Fog Light Bezel Design and Replacement Notes

Before the removed bezel is discarded, compare vent or grille openings, review nearby cover openings, and check the adjoining gap. For a repeat wholesale order, review fastening slots, compare the original edge profile, and inspect the frame width.

During an OE-led review for HD02008-058, inspect the end geometry, review fastening slots, and check the bumper transition. While reviewing the supplied photographs, compare the surface texture, inspect reinforcement ribs, and review narrow bezel ends.

For wholesale selection of 71103-TEA-T10, check the adjoining gap, confirm decorative finish details, and check the bumper transition. Before final installation, review nearby cover openings, check the bezel curvature, and compare transferred hardware.

Application-Specific Identification Notes

For application-specific sourcing with 71103-TEA-T10 on the Civic 2016: check the nearby lamp opening. The HD02008-058 sample for the right side should compare mounting-hole height. For HONDA identification, 71103-TEA-T10 also requires technicians to inspect damaged mounting points. A buyer quoting HD02008-058 should check the ordered mounting side for the HONDA Civic 2016 order.

For application-specific sourcing with 71103-TEA-T10 on the Civic 2016: confirm the bumper position. The HD02008-058 sample for the right side should inspect the moulded face. For HONDA identification, 71103-TEA-T10 also requires technicians to inspect each screw point. A buyer quoting HD02008-058 should confirm the required finish for the HONDA Civic 2016 order.

For application-specific sourcing with 71103-TEA-T10 on the Civic 2016: review market-version differences. The HD02008-058 sample for the right side should compare vent or grille openings. For HONDA identification, 71103-TEA-T10 also requires technicians to verify the lamp remains centred. A buyer quoting HD02008-058 should support the bezel during transit for the HONDA Civic 2016 order.

For application-specific sourcing with 71103-TEA-T10 on the Civic 2016: compare the original grille section. The HD02008-058 sample for the right side should inspect the back-side structure. For HONDA identification, 71103-TEA-T10 also requires technicians to retain the removed bezel for comparison. A buyer quoting HD02008-058 should send photographs of the removed part for the HONDA Civic 2016 order.

Installation Guidance

When preparing a Civic bumper repair, avoid bending moulded tabs, confirm every locator engages, and check adjacent panel gaps. When checking the bumper opening, transfer reusable clips carefully, inspect damaged mounting points, and align the lamp opening first.

During comparison with the original lamp surround, review separate hardware needs, clean the bumper mounting area, and check adjacent panel gaps. At the workshop preparation stage, protect exposed panel edges, verify the lamp remains centred, and transfer reusable clips carefully.

For replacement in the right front area, verify the lamp remains centred, check the final perimeter, and check lamp-to-bezel clearance. For a repeat wholesale order, transfer reusable clips carefully, support the bumper cover evenly, and review the completed alignment.

Product Technical Specifications

Wholesale Supply and Packing

Before the removed bezel is discarded, state the destination port, state the required quantity, and include the complete OE reference. Before clips or hardware are transferred, protect projecting locator tabs, retain the product label, and review carton edge protection.

During an OE-led review for HD02008-058, include the complete OE reference, state annual purchasing volume, and support the bezel during transit. During the physical comparison, confirm the delivery schedule, state the target vehicle, and send photographs of the removed part.

For wholesale selection of 71103-TEA-T10, retain the product label, inspect receiving condition, and support the bezel during transit. When checking the bumper opening, protect projecting locator tabs, request supported carton packing, and confirm the required finish.

Frequently Asked Questions

How should 71103-TEA-T10 be compared before installation?

Compare the complete OE number, outer contour, lamp opening, locating tabs, screw points and surface finish with the removed component before tightening hardware. For Civic, check adjacent bumper parts, check the adjoining gap, verify the lamp remains centred, and retain the product label before installation or quotation.

What should be inspected when 71103-TEA-T10 arrives?

Check the label, contour, surface finish, lamp aperture, tabs, mounting points and carton condition before installation or disposal of the packaging. For Civic, review market-version differences, inspect the end geometry, review separate hardware needs, and include the complete OE reference before installation or quotation.

Where is 71103-TEA-T10 installed?

The listed front right fog light bezel belongs in the right front bumper area. An opposite-side or different-trim bezel may use another outline and tab arrangement. For Civic, check the vehicle build date, compare vent or grille openings, avoid bending moulded tabs, and state the destination port before installation or quotation.

What details should accompany a 71103-TEA-T10 quotation request?

Send the complete OE reference, vehicle information, mounting side, original-part photographs, quantity and destination so the application can be reviewed. For Civic, inspect the lamp aperture size, check the lamp interface, trial-fit the bezel without force, and confirm separate clip requirements before installation or quotation.

Why must the left and right versions of 71103-TEA-T10 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Civic, check the nearby lamp opening, inspect reinforcement ribs, inspect the surrounding guides, and support the bezel during transit before installation or quotation.

Request a Quote

Send the complete OE reference 71103-TEA-T10, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.