71103-TBX-H01 Front Right Fog Light Trim for HONDA Inspire 2019

71103-TBX-H01 Front Right Fog Light Trim Product Overview

This product page presents 71103-TBX-H01 for buyers comparing a front right fog light trim for HONDA Inspire 2019. Check the right orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Inspire

During an OE-led review for HD02008-026, verify the mounting side, review market-version differences, and match the stated trim level. Before packing the confirmed item, confirm the model year, compare the full OE marking, and inspect the lamp aperture size.

For wholesale selection of 71103-TBX-H01, match the outer contour, review the bezel orientation, and match the locating-slot layout. For a no-force trial fit, inspect the lamp aperture size, match the stated trim level, and inspect the removed bezel.

Before sourcing this front right fog light trim, match the locating-slot layout, review facelift styling, and match the stated trim level. While checking adjacent body parts, check adjacent bumper parts, confirm the bumper position, and confirm the model year.

Front Right Fog Light Trim Design and Replacement Notes

During comparison with the original lamp surround, review narrow bezel ends, check the adjoining gap, and compare transferred hardware. During receiving inspection, measure the original length, inspect the back-side structure, and check the lamp interface.

For replacement in the right front area, review nearby cover openings, check the bezel curvature, and compare transferred hardware. Before the quotation is confirmed, compare vent or grille openings, compare the surface texture, and compare mounting-hole height.

When separating nearby Inspire variants, inspect the moulded face, review the outer-edge shape, and review nearby cover openings. Before packing the confirmed item, measure the original length, review narrow bezel ends, and check the bumper transition.

Application-Specific Identification Notes

For application-specific sourcing with 71103-TBX-H01 on the Inspire 2019: check the vehicle build date. The HD02008-026 sample for the right side should check the bezel curvature. For HONDA identification, 71103-TBX-H01 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-026 should confirm separate clip requirements for the HONDA Inspire 2019 order.

For application-specific sourcing with 71103-TBX-H01 on the Inspire 2019: compare the full OE marking. The HD02008-026 sample for the right side should inspect the moulded face. For HONDA identification, 71103-TBX-H01 also requires technicians to review the completed alignment. A buyer quoting HD02008-026 should state annual purchasing volume for the HONDA Inspire 2019 order.

For application-specific sourcing with 71103-TBX-H01 on the Inspire 2019: review market-version differences. The HD02008-026 sample for the right side should measure the original length. For HONDA identification, 71103-TBX-H01 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-026 should state the target vehicle for the HONDA Inspire 2019 order.

For application-specific sourcing with 71103-TBX-H01 on the Inspire 2019: compare the full OE marking. The HD02008-026 sample for the right side should confirm decorative finish details. For HONDA identification, 71103-TBX-H01 also requires technicians to clean the bumper mounting area. A buyer quoting HD02008-026 should confirm the delivery schedule for the HONDA Inspire 2019 order.

Installation Guidance

During an OE-led review for HD02008-026, confirm the finished bumper gap, inspect damaged mounting points, and inspect each screw point. While reviewing the supplied photographs, inspect the surrounding guides, align the lamp opening first, and check lamp-to-bezel clearance.

For wholesale selection of 71103-TBX-H01, align the lamp opening first, verify the lamp remains centred, and check the final perimeter. Before final installation, check lamp-to-bezel clearance, transfer reusable clips carefully, and support the bumper cover evenly.

Before sourcing this front right fog light trim, retain the removed bezel for comparison, check lamp-to-bezel clearance, and inspect each screw point. During receiving inspection, confirm the fitting direction, protect exposed panel edges, and review separate hardware needs.

Product Technical Specifications

Wholesale Supply and Packing

During comparison with the original lamp surround, inspect receiving condition, request protective inner wrapping, and review carton edge protection. At the workshop preparation stage, include the complete OE reference, state annual purchasing volume, and support the bezel during transit.

For replacement in the right front area, compare the supplied photographs, confirm separate clip requirements, and review carton edge protection. For a repeat wholesale order, state the target vehicle, confirm sample requirements, and retain the product label.

When separating nearby Inspire variants, confirm the delivery schedule, request supported carton packing, and review carton edge protection. While reviewing the supplied photographs, state the destination port, confirm the required finish, and state the target vehicle.

Frequently Asked Questions

Are mounting clips supplied with 71103-TBX-H01?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Inspire, check the nearby lamp opening, check the adjoining gap, inspect damaged mounting points, and request protective inner wrapping before installation or quotation.

Does 71103-TBX-H01 include the complete lamp assembly?

No. This listing covers the pictured front right fog light trim. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Inspire, review market-version differences, review the outer-edge shape, confirm the fitting direction, and support the bezel during transit before installation or quotation.

How should 71103-TBX-H01 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Inspire, inspect the lamp aperture size, inspect the end geometry, verify the lamp remains centred, and check the ordered mounting side before installation or quotation.

What vehicle application is listed for 71103-TBX-H01?

71103-TBX-H01 is presented for HONDA Inspire 2019. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Inspire, check adjacent bumper parts, measure the original length, check adjacent panel gaps, and provide the delivery country before installation or quotation.

Can photographs alone confirm 71103-TBX-H01 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Inspire, check the vehicle build date, compare vent or grille openings, review separate hardware needs, and retain the product label before installation or quotation.

Request a Quote

Send the complete OE reference 71103-TBX-H01, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.