71103-T5R-A00 Front Right Fog Light Bezel for HONDA Fit 2015

71103-T5R-A00 Front Right Fog Light Bezel Product Overview

The product shown under 71103-T5R-A00 is a front right fog light bezel intended for HONDA Fit 2015. Check the right orientation, lamp opening, mounting tabs and standard-specification specification against the original component.

Fitment and Application for Fit

When comparing 71103-T5R-A00 with the removed bezel, check adjacent bumper parts, match the locating-slot layout, and compare the installation direction. Before final installation, confirm the vehicle market, inspect the lamp aperture size, and compare the full OE marking.

For the listed 2015 application, confirm the model year, confirm the bumper position, and check adjacent bumper parts. During receiving inspection, match the stated trim level, review facelift styling, and match the locating-slot layout.

Before the removed bezel is discarded, check the nearby lamp opening, verify the mounting side, and confirm the model year. Before the quotation is confirmed, confirm the vehicle market, check adjacent bumper parts, and compare the original grille section.

Front Right Fog Light Bezel Design and Replacement Notes

Before confirming this fog light bezel, compare vent or grille openings, review locator direction, and inspect the end geometry. For a repeat wholesale order, compare the surface texture, check the adjoining gap, and inspect the back-side structure.

For HONDA Fit 2015, inspect the end geometry, inspect the frame width, and inspect reinforcement ribs. While reviewing the supplied photographs, inspect the moulded face, measure the original length, and compare the centre alignment.

When preparing a Fit bumper repair, check the adjoining gap, review narrow bezel ends, and inspect reinforcement ribs. Before final installation, compare the surface texture, check the bumper transition, and review fastening slots.

Application-Specific Identification Notes

A vehicle-side comparison starts with 71103-T5R-A00 on the Fit 2015: review market-version differences. The HD02008-094 sample for the right side should inspect reinforcement ribs. For HONDA identification, 71103-T5R-A00 also requires technicians to confirm the fitting direction. A buyer quoting HD02008-094 should request export quotation terms for the HONDA Fit 2015 order.

For application-specific sourcing with 71103-T5R-A00 on the Fit 2015: compare every fixing tab. The HD02008-094 sample for the right side should inspect the moulded face. For HONDA identification, 71103-T5R-A00 also requires technicians to transfer reusable clips carefully. A buyer quoting HD02008-094 should compare the supplied photographs for the HONDA Fit 2015 order.

A trim-level comparison requires with 71103-T5R-A00 on the Fit 2015: review market-version differences. The HD02008-094 sample for the right side should check the bumper transition. For HONDA identification, 71103-T5R-A00 also requires technicians to support the bumper cover evenly. A buyer quoting HD02008-094 should include the complete OE reference for the HONDA Fit 2015 order.

Before workshop installation with 71103-T5R-A00 on the Fit 2015: confirm the surface finish. The HD02008-094 sample for the right side should compare the surface texture. For HONDA identification, 71103-T5R-A00 also requires technicians to confirm the finished bumper gap. A buyer quoting HD02008-094 should protect projecting locator tabs for the HONDA Fit 2015 order.

Installation Guidance

When comparing 71103-T5R-A00 with the removed bezel, avoid bending moulded tabs, review the completed alignment, and inspect damaged mounting points. When checking the bumper opening, protect exposed panel edges, support the bumper cover evenly, and retain the removed bezel for comparison.

For the listed 2015 application, review separate hardware needs, inspect each screw point, and avoid bending moulded tabs. At the workshop preparation stage, transfer reusable clips carefully, trial-fit the bezel without force, and clean the bumper mounting area.

Before the removed bezel is discarded, verify the lamp remains centred, protect nearby painted surfaces, and inspect damaged mounting points. For a repeat wholesale order, confirm every locator engages, check lamp-to-bezel clearance, and protect exposed panel edges.

Product Technical Specifications

Wholesale Supply and Packing

Before confirming this fog light bezel, state the destination port, compare the supplied photographs, and retain the product label. Before clips or hardware are transferred, confirm the required finish, request protective inner wrapping, and state annual purchasing volume.

For HONDA Fit 2015, include the complete OE reference, confirm the required finish, and request supported carton packing. During the physical comparison, protect projecting locator tabs, support the bezel during transit, and inspect receiving condition.

When preparing a Fit bumper repair, retain the product label, confirm the packing method, and request supported carton packing. When checking the bumper opening, compare the supplied photographs, provide the delivery country, and confirm sample requirements.

Frequently Asked Questions

Why must the left and right versions of 71103-T5R-A00 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Fit, review the bezel orientation, check the adjoining gap, review separate hardware needs, and state the destination port before installation or quotation.

Is workshop installation recommended for 71103-T5R-A00?

Yes. A workshop can inspect damaged bumper mounts on the Fit, align the lamp opening and avoid forcing a bezel intended for another trim level. For Fit, review market-version differences, measure the original length, confirm an evenly seated fit, and request protective inner wrapping before installation or quotation.

Are mounting clips supplied with 71103-T5R-A00?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Fit, review the bezel orientation, check the lamp interface, inspect the surrounding guides, and provide the delivery country before installation or quotation.

Does 71103-T5R-A00 include the complete lamp assembly?

No. This listing covers the pictured front right fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Fit, review market-version differences, compare mounting-hole height, verify the lamp remains centred, and include the complete OE reference before installation or quotation.

How should 71103-T5R-A00 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Fit, review the bezel orientation, review the outer-edge shape, support the bumper cover evenly, and request supported carton packing before installation or quotation.

Request a Quote

Send the complete OE reference 71103-T5R-A00, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.