71103-SWA-000 Bumper Trim Molding for HONDA CR-V 2007 Right
Primary OE reference: 71103-SWA-000
Cross-reference number 1: 71103-SWA-000
Cross-reference number 2: 71103SWA000
Product: Bumper Trim Molding
Vehicle: HONDA CR-V 2007
Installation area: Front
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-062
Fitment note: compare the mounting direction; compare the removed trim; review the end profiles before ordering 71103-SWA-000
Product comparison: inspect narrow moulding ends; review the outer-edge shape; review the surface texture against the removed bumper trim molding
Installation note: confirm the fitting direction; review separate hardware needs; confirm an even seated fit on the CR-V
Wholesale enquiry: compare the supplied photographs; retain the product label; confirm sample requirements for HD02005-062
Application guidance: 71103-SWA-000 is listed for HONDA CR-V 2007; begin with the right front profile. Also confirm the surface specification, review the centre alignment, check adjacent panel gaps, and confirm sample requirements.
71103-SWA-000 Bumper Trim Molding Product Overview
The subject is a bumper trim molding catalogued as 71103-SWA-000 for HONDA CR-V 2007. Item HD02005-062 uses the stated verify against the original part surface detail, which should be compared with the removed component before shipment.
71103-SWA-000 is listed for HONDA CR-V 2007; begin with the right front profile. Also confirm the surface specification, review the centre alignment, check adjacent panel gaps, and confirm sample requirements.
Fitment and Application for CR-V
During an OE-led check for HD02005-062, compare the mounting direction, inspect the original contour, and compare the removed trim. Before packing the confirmed item, compare the complete OE number, check nearby lamp openings, and confirm the surface specification.
For wholesale selection of 71103-SWA-000, verify the mounting side, compare every attachment point, and confirm the installation position. For a no-force trial fit, match the bumper outline, compare the removed trim, and confirm the surface specification.
Before sourcing this bumper trim molding for CR-V, match the bumper outline, check adjacent garnish pieces, and confirm the production year. While checking adjacent body parts, compare every attachment point, check the vehicle build date, and match the original clip spacing.
Bumper Trim Molding Design and Replacement Notes
During comparison with the original bumper trim, inspect the back-side structure, check the bumper interface, and review nearby cover openings. During receiving inspection, compare visible edge height, inspect the moulding width, and review the outer-edge shape.
For a replacement on the right front area, examine the visible finish, review the centre alignment, and review the surface texture. Before the quotation is confirmed, review transferred hardware, review nearby cover openings, and examine the visible finish.
When separating nearby CR-V trim variants, inspect the fastening slots, compare the original length, and examine the visible finish. Before packing the confirmed item, check the panel transition, inspect the back-side structure, and compare the original edge profile.
For a direct comparison of 71103-SWA-000, check the vehicle build date, compare visible edge height, inspect damaged mounting points, and request export quotation terms. The bumper trim molding should match the original right front profile before it is installed or released for shipment.
Installation Guidance
During an OE-led check for HD02005-062, check lamp-cover clearance, protect painted panel edges, and confirm an even seated fit. While reviewing the supplied photographs, confirm the final trim gap, protect the visible surface, and inspect damaged mounting points.
For wholesale selection of 71103-SWA-000, confirm an even seated fit, protect the visible surface, and confirm locator engagement. Before final installation, protect painted panel edges, confirm the final trim gap, and inspect damaged mounting points.
Before sourcing this bumper trim molding for CR-V, protect the visible surface, trial-fit without force, and align the centre first. During receiving inspection, inspect damaged mounting points, transfer reusable clips carefully, and check adjacent panel gaps.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71103-SWA-000 |
| Cross-reference numbers | 71103-SWA-000 71103SWA000 |
| Internal item code | HD02005-062 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2007 |
| Installation area | Front |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA CR-V 2007 |
Wholesale Supply and Packing
During comparison with the original bumper trim, inspect the receiving condition, confirm separate accessory needs, and confirm the packing method. At the workshop preparation stage, provide the delivery country, protect projecting locators, and state the target application.
For a replacement on the right front area, compare the supplied photographs, state the required quantity, and inspect the receiving condition. For a repeat wholesale order, state annual purchasing volume, send original-part photographs, and confirm sample requirements.
When separating nearby CR-V trim variants, confirm the delivery schedule, provide the delivery country, and confirm the surface requirement. While reviewing the supplied photographs, support the moulding length, confirm sample requirements, and confirm separate accessory needs.
A structured enquiry for HD02005-062 includes 71103-SWA-000, CR-V vehicle vehicle details, target price basis, packing method and destination. This reduces follow-up and keeps the technical selection visible to purchasing staff.
Frequently Asked Questions
Does 71103-SWA-000 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For CR-V, check adjacent garnish pieces, inspect the locator direction, confirm the fitting direction, and confirm the surface requirement before installation or quotation.
Is a model name alone enough to order 71103-SWA-000?
No. The CR-V name is useful for discovery, but OE number 71103-SWA-000, VIN or build data, side, finish and physical attachment points should agree. For CR-V, review facelift differences, compare the original length, inspect damaged mounting points, and request protective inner packing before installation or quotation.
What should be inspected when 71103-SWA-000 arrives?
Check the bumper trim molding part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For CR-V, match the bumper outline, review the centre alignment, review the completed alignment, and state annual purchasing volume before installation or quotation.
What information is needed for a 71103-SWA-000 quotation?
Send HONDA CR-V 2007 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For CR-V, compare the mounting direction, check the bumper interface, retain the removed component, and state the target application before installation or quotation.
How should 71103-SWA-000 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For CR-V, inspect the original contour, inspect the fastening slots, protect the visible surface, and protect projecting locators before installation or quotation.
Request a Quote
Send the complete OE reference 71103-SWA-000, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
