71102-TBX-H51 Front Right Fog Light Bezel for HONDA Inspire 2022

71102-TBX-H51 Front Right Fog Light Bezel Product Overview

This listing covers 71102-TBX-H51, a front right fog light bezel associated with HONDA Inspire 2022. Check the right orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Inspire

Before sourcing this front right fog light bezel, confirm the surface finish, check adjacent bumper parts, and match the locating-slot layout. At the workshop preparation stage, compare the installation direction, confirm the vehicle market, and inspect the lamp aperture size.

Before confirming this fog light bezel, compare the full OE marking, review facelift styling, and confirm the vehicle market. For a repeat wholesale order, check the nearby lamp opening, match the locating-slot layout, and inspect the removed bezel.

For HONDA Inspire 2022, compare every fixing tab, inspect the removed bezel, and verify the mounting side. While reviewing the supplied photographs, review market-version differences, match the stated trim level, and confirm the model year.

Front Right Fog Light Bezel Design and Replacement Notes

When separating nearby Inspire variants, inspect the back-side structure, compare vent or grille openings, and review fastening slots. During the physical comparison, measure the original length, confirm decorative finish details, and inspect the end geometry.

When comparing 71102-TBX-H51 with the removed bezel, confirm decorative finish details, check the lamp interface, and review narrow bezel ends. When checking the bumper opening, inspect the end geometry, inspect the moulded face, and compare mounting-hole height.

For the listed 2022 application, compare the centre alignment, inspect the end geometry, and review fastening slots. At the workshop preparation stage, check the bumper transition, compare the surface texture, and inspect reinforcement ribs.

Application-Specific Identification Notes

For an export quotation with 71102-TBX-H51 on the Inspire 2022: check adjacent bumper parts. The HD02008-030 sample for the right side should measure the original length. For HONDA identification, 71102-TBX-H51 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-030 should request supported carton packing for the HONDA Inspire 2022 order.

For application-specific sourcing with 71102-TBX-H51 on the Inspire 2022: compare the installation direction. The HD02008-030 sample for the right side should check the adjoining gap. For HONDA identification, 71102-TBX-H51 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-030 should retain the product label for the HONDA Inspire 2022 order.

OE selection begins with 71102-TBX-H51 on the Inspire 2022: review the bezel orientation. The HD02008-030 sample for the right side should check the bezel curvature. For HONDA identification, 71102-TBX-H51 also requires technicians to check lamp-to-bezel clearance. A buyer quoting HD02008-030 should request supported carton packing for the HONDA Inspire 2022 order.

A trim-level comparison requires with 71102-TBX-H51 on the Inspire 2022: review market-version differences. The HD02008-030 sample for the right side should check the adjoining gap. For HONDA identification, 71102-TBX-H51 also requires technicians to review separate hardware needs. A buyer quoting HD02008-030 should check the ordered mounting side for the HONDA Inspire 2022 order.

Installation Guidance

Before sourcing this front right fog light bezel, protect nearby painted surfaces, review separate hardware needs, and transfer reusable clips carefully. While checking adjacent body parts, inspect the surrounding guides, retain the removed bezel for comparison, and support the bumper cover evenly.

Before confirming this fog light bezel, confirm every locator engages, check adjacent panel gaps, and transfer reusable clips carefully. Before clips or hardware are transferred, inspect damaged mounting points, align the lamp opening first, and trial-fit the bezel without force.

For HONDA Inspire 2022, protect exposed panel edges, verify the lamp remains centred, and transfer reusable clips carefully. During the physical comparison, confirm the fitting direction, confirm the finished bumper gap, and inspect damaged mounting points.

Product Technical Specifications

Wholesale Supply and Packing

When separating nearby Inspire variants, review carton edge protection, retain the product label, and protect projecting locator tabs. Before packing the confirmed item, include the complete OE reference, state the required quantity, and state the destination port.

When comparing 71102-TBX-H51 with the removed bezel, confirm the packing method, request protective inner wrapping, and send photographs of the removed part. For a no-force trial fit, request supported carton packing, inspect receiving condition, and state the target vehicle.

For the listed 2022 application, send photographs of the removed part, check the ordered mounting side, and protect projecting locator tabs. While checking adjacent body parts, state the destination port, confirm sample requirements, and provide the delivery country.

Frequently Asked Questions

Is workshop installation recommended for 71102-TBX-H51?

Yes. A workshop can inspect damaged bumper mounts on the Inspire, align the lamp opening and avoid forcing a bezel intended for another trim level. For Inspire, verify the mounting side, inspect the moulded face, review the completed alignment, and compare the supplied photographs before installation or quotation.

Are mounting clips supplied with 71102-TBX-H51?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Inspire, review the bezel orientation, inspect reinforcement ribs, inspect damaged mounting points, and provide the delivery country before installation or quotation.

Does 71102-TBX-H51 include the complete lamp assembly?

No. This listing covers the pictured front right fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Inspire, match the stated trim level, inspect the frame width, protect exposed panel edges, and confirm sample requirements before installation or quotation.

How should 71102-TBX-H51 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Inspire, check the vehicle build date, inspect the end geometry, support the bumper cover evenly, and state the destination port before installation or quotation.

What vehicle application is listed for 71102-TBX-H51?

71102-TBX-H51 is presented for HONDA Inspire 2022. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Inspire, compare the full OE marking, inspect the back-side structure, retain the removed bezel for comparison, and protect projecting locator tabs before installation or quotation.

Request a Quote

Send the complete OE reference 71102-TBX-H51, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.