71102-T9J-T50 Front Right Fog Light Bezel for HONDA City 2015

71102-T9J-T50 Front Right Fog Light Bezel Product Overview

This listing covers 71102-T9J-T50, a front right fog light bezel associated with HONDA City 2015. Check the right orientation, lamp opening, mounting tabs and high-specification specification against the original component.

Fitment and Application for City

For wholesale selection of 71102-T9J-T50, check the vehicle build date, compare the original grille section, and review the bezel orientation. Before final installation, confirm the surface finish, check adjacent bumper parts, and match the locating-slot layout.

Before sourcing this front right fog light bezel, compare the installation direction, verify the mounting side, and check the vehicle build date. During receiving inspection, confirm the vehicle market, inspect the removed bezel, and compare the original grille section.

Before confirming this fog light bezel, review market-version differences, compare the full OE marking, and compare the installation direction. Before the quotation is confirmed, confirm the surface finish, check the vehicle build date, and confirm the bumper position.

Front Right Fog Light Bezel Design and Replacement Notes

For replacement in the right front area, check the adjoining gap, inspect the back-side structure, and compare mounting-hole height. For a repeat wholesale order, confirm decorative finish details, compare the original edge profile, and compare the centre alignment.

When separating nearby City variants, compare mounting-hole height, compare the surface texture, and compare vent or grille openings. While reviewing the supplied photographs, compare transferred hardware, check the bezel curvature, and review nearby cover openings.

When comparing 71102-T9J-T50 with the removed bezel, compare the original edge profile, inspect the moulded face, and compare vent or grille openings. Before final installation, confirm decorative finish details, review the outer-edge shape, and inspect the frame width.

Application-Specific Identification Notes

OE selection begins with 71102-T9J-T50 on the City 2015: check the nearby lamp opening. The HD02008-116 sample for the right side should compare mounting-hole height. For HONDA identification, 71102-T9J-T50 also requires technicians to inspect damaged mounting points. A buyer quoting HD02008-116 should check the ordered mounting side for the HONDA City 2015 order.

For application-specific sourcing with 71102-T9J-T50 on the City 2015: review market-version differences. The HD02008-116 sample for the right side should check the adjoining gap. For HONDA identification, 71102-T9J-T50 also requires technicians to support the bumper cover evenly. A buyer quoting HD02008-116 should check the ordered mounting side for the HONDA City 2015 order.

For an export quotation with 71102-T9J-T50 on the City 2015: review the bezel orientation. The HD02008-116 sample for the right side should compare vent or grille openings. For HONDA identification, 71102-T9J-T50 also requires technicians to verify the lamp remains centred. A buyer quoting HD02008-116 should support the bezel during transit for the HONDA City 2015 order.

A vehicle-side comparison starts with 71102-T9J-T50 on the City 2015: compare the installation direction. The HD02008-116 sample for the right side should check the bezel curvature. For HONDA identification, 71102-T9J-T50 also requires technicians to verify the lamp remains centred. A buyer quoting HD02008-116 should confirm separate clip requirements for the HONDA City 2015 order.

Installation Guidance

For wholesale selection of 71102-T9J-T50, verify the lamp remains centred, confirm every locator engages, and confirm an evenly seated fit. When checking the bumper opening, align the lamp opening first, confirm the fitting direction, and clean the bumper mounting area.

Before sourcing this front right fog light bezel, inspect damaged mounting points, protect nearby painted surfaces, and verify the lamp remains centred. At the workshop preparation stage, review the completed alignment, review separate hardware needs, and inspect each screw point.

Before confirming this fog light bezel, check lamp-to-bezel clearance, protect exposed panel edges, and confirm an evenly seated fit. For a repeat wholesale order, confirm the finished bumper gap, support the bumper cover evenly, and align the lamp opening first.

Product Technical Specifications

Wholesale Supply and Packing

For replacement in the right front area, retain the product label, confirm the required finish, and request protective inner wrapping. Before clips or hardware are transferred, state annual purchasing volume, state the target vehicle, and protect projecting locator tabs.

When separating nearby City variants, check the ordered mounting side, state annual purchasing volume, and request export quotation terms. During the physical comparison, confirm the packing method, state the destination port, and confirm the delivery schedule.

When comparing 71102-T9J-T50 with the removed bezel, request protective inner wrapping, inspect receiving condition, and request export quotation terms. When checking the bumper opening, confirm the required finish, confirm separate clip requirements, and state the required quantity.

Frequently Asked Questions

Does trim specification matter for 71102-T9J-T50?

Yes. high-specification can change the opening pattern, finish and locator positions, so compare the removed bezel and bumper before purchase. For City, match the outer contour, inspect the moulded face, retain the removed bezel for comparison, and confirm the delivery schedule before installation or quotation.

How should 71102-T9J-T50 be compared before installation?

Compare the complete OE number, outer contour, lamp opening, locating tabs, screw points and surface finish with the removed component before tightening hardware. For City, review the bezel orientation, inspect the end geometry, review separate hardware needs, and include the complete OE reference before installation or quotation.

What should be inspected when 71102-T9J-T50 arrives?

Check the label, contour, surface finish, lamp aperture, tabs, mounting points and carton condition before installation or disposal of the packaging. For City, match the locating-slot layout, review narrow bezel ends, confirm the finished bumper gap, and inspect receiving condition before installation or quotation.

Where is 71102-T9J-T50 installed?

The listed front right fog light bezel belongs in the right front bumper area. An opposite-side or different-trim bezel may use another outline and tab arrangement. For City, inspect the lamp aperture size, check the lamp interface, trial-fit the bezel without force, and confirm separate clip requirements before installation or quotation.

What details should accompany a 71102-T9J-T50 quotation request?

Send the complete OE reference, vehicle information, mounting side, original-part photographs, quantity and destination so the application can be reviewed. For City, match the stated trim level, confirm decorative finish details, confirm every locator engages, and confirm the packing method before installation or quotation.

Request a Quote

Send the complete OE reference 71102-T9J-T50, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.