71102-T6P-H10 Front Right Fog Light Bezel for HONDA Crider 2016

71102-T6P-H10 Front Right Fog Light Bezel Product Overview

The product shown under 71102-T6P-H10 is a front right fog light bezel intended for HONDA Crider 2016. Check the right orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Crider

Before the removed bezel is discarded, inspect the removed bezel, confirm the bumper position, and check the vehicle build date. Before clips or hardware are transferred, confirm the surface finish, compare the installation direction, and compare the full OE marking.

During an OE-led review for HD02008-118, check the vehicle build date, verify the mounting side, and compare the installation direction. During the physical comparison, match the outer contour, review market-version differences, and match the locating-slot layout.

For wholesale selection of 71102-T6P-H10, compare the installation direction, confirm the vehicle market, and inspect the lamp aperture size. When checking the bumper opening, compare the full OE marking, confirm the model year, and match the stated trim level.

Front Right Fog Light Bezel Design and Replacement Notes

When preparing a Crider bumper repair, check the bezel curvature, compare transferred hardware, and compare vent or grille openings. For a no-force trial fit, compare the surface texture, compare mounting-hole height, and compare the centre alignment.

During comparison with the original lamp surround, inspect reinforcement ribs, review fastening slots, and check the bezel curvature. While checking adjacent body parts, inspect the moulded face, review the outer-edge shape, and review nearby cover openings.

For replacement in the right front area, check the lamp interface, inspect the frame width, and compare vent or grille openings. Before clips or hardware are transferred, review locator direction, inspect the end geometry, and compare the surface texture.

Application-Specific Identification Notes

When the bumper opening is reviewed with 71102-T6P-H10 on the Crider 2016: check the vehicle build date. The HD02008-118 sample for the right side should check the adjoining gap. For HONDA identification, 71102-T6P-H10 also requires technicians to check lamp-to-bezel clearance. A buyer quoting HD02008-118 should state the target vehicle for the HONDA Crider 2016 order.

For application-specific sourcing with 71102-T6P-H10 on the Crider 2016: check adjacent bumper parts. The HD02008-118 sample for the right side should check the adjoining gap. For HONDA identification, 71102-T6P-H10 also requires technicians to confirm the fitting direction. A buyer quoting HD02008-118 should request export quotation terms for the HONDA Crider 2016 order.

Before a replacement is packed with 71102-T6P-H10 on the Crider 2016: review the bezel orientation. The HD02008-118 sample for the right side should inspect the end geometry. For HONDA identification, 71102-T6P-H10 also requires technicians to confirm an evenly seated fit. A buyer quoting HD02008-118 should check the ordered mounting side for the HONDA Crider 2016 order.

A vehicle-side comparison starts with 71102-T6P-H10 on the Crider 2016: inspect the removed bezel. The HD02008-118 sample for the right side should check the lamp interface. For HONDA identification, 71102-T6P-H10 also requires technicians to support the bumper cover evenly. A buyer quoting HD02008-118 should request supported carton packing for the HONDA Crider 2016 order.

Installation Guidance

Before the removed bezel is discarded, confirm the fitting direction, confirm every locator engages, and trial-fit the bezel without force. Before the quotation is confirmed, confirm the finished bumper gap, review separate hardware needs, and retain the removed bezel for comparison.

During an OE-led review for HD02008-118, inspect the surrounding guides, confirm the finished bumper gap, and verify the lamp remains centred. Before packing the confirmed item, clean the bumper mounting area, support the bumper cover evenly, and protect nearby painted surfaces.

For wholesale selection of 71102-T6P-H10, trial-fit the bezel without force, inspect each screw point, and verify the lamp remains centred. For a no-force trial fit, confirm every locator engages, confirm an evenly seated fit, and align the lamp opening first.

Product Technical Specifications

Wholesale Supply and Packing

When preparing a Crider bumper repair, provide the delivery country, state the required quantity, and request protective inner wrapping. Before final installation, confirm the delivery schedule, state the destination port, and confirm the packing method.

During comparison with the original lamp surround, support the bezel during transit, compare the supplied photographs, and request protective inner wrapping. During receiving inspection, protect projecting locator tabs, confirm separate clip requirements, and confirm the delivery schedule.

For replacement in the right front area, confirm separate clip requirements, inspect receiving condition, and include the complete OE reference. Before the quotation is confirmed, confirm the delivery schedule, check the ordered mounting side, and confirm sample requirements.

Frequently Asked Questions

Does 71102-T6P-H10 include the complete lamp assembly?

No. This listing covers the pictured front right fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Crider, match the stated trim level, inspect the moulded face, clean the bumper mounting area, and state the required quantity before installation or quotation.

How should 71102-T6P-H10 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Crider, review the bezel orientation, check the adjoining gap, check lamp-to-bezel clearance, and state the target vehicle before installation or quotation.

What vehicle application is listed for 71102-T6P-H10?

71102-T6P-H10 is presented for HONDA Crider 2016. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Crider, verify the mounting side, inspect the moulded face, clean the bumper mounting area, and state the required quantity before installation or quotation.

Can photographs alone confirm 71102-T6P-H10 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Crider, check adjacent bumper parts, check the adjoining gap, check lamp-to-bezel clearance, and state the target vehicle before installation or quotation.

Does trim specification matter for 71102-T6P-H10?

Yes. Different equipment grades can change the opening pattern, finish and locator positions, so compare the removed bezel and bumper before purchase. For Crider, compare every fixing tab, inspect the moulded face, clean the bumper mounting area, and state the required quantity before installation or quotation.

Request a Quote

Send the complete OE reference 71102-T6P-H10, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.